HDI Waterborne WanHua 268

HDI Waterborne WanHua 268

 

Product Description

Aquolin 268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesive. After addition of Aquolin 268, the ready-to-use mixture must be used within the pot life.

Aquolin 268 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.

Properties

  1. High gloss and high building up.

  2. Excellent weather resistance.

 

Characteristic data*

Property

Value

Unit

Method

Appearance

Colorless to yellowish transparent liquid

NCO content

%

GB/T 12009.4-2016

Viscosity

20.5±0.5

mPa·s

Brookfield LV, 63#/3rpm,25°C

Color APHA

5000-7000

GB/T 1722-1992

Monomeric

isocyanate

≤0.1

%

GB/T 18446-2009

Flash point

~196

°C

GB/T 5208

Density

~1.17

g/cm3

GB/T 4472-2011

*These properties are typical but do not constitute specifications.

Storage:

The product should be stored in dry conditions above 5°C and below 35°C with the

integrity of the packaging, and prevent direct sunlight. The validity of this product is for

12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.

E_mail us [email protected]

HDI Waterborne WanHua 161

HDI Waterborne WanHua 161

 

Product Description:

Aquolin 161 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with water-borne polyurethane, polyacrylate, etc., it can be used for adhesive products toimprove the resistance to hydrolysis and heat. It also can be used for waterborne coatings. After addition of Aquolin 161, the ready-to-use mixture must be used within the pot life.

Aquolin 161 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.

Product Features:

  1. Excellent resistance

  2. Long pot life

  3. Good gloss and building up

 

Characteristic Data* :

Property

Value

Unit

Method

Appearance

Transparent to

light yellow liquid

NCO content

18.2-19.2

%

GB 12009.4-2016

Viscosity (25°C)

1500-3500

mPa·s

GB/T 2794-2013

(Brookfield LV,63#/12rpm)

Color APHA

<60

GB/T 1722-1992

Monomeric

isocyanate

≤0.1

%

GB/T 18446-2009

Flash point

~226

%

GB/T 5208-2008

Density

~1.16

g/cm3

GB/T 4472-2011

*Property values represent typical results only and are not to be considered as specifications,subject to specific COA

Storage:

The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increase s in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI closed AsahiKasei MF-K60X

HDI closed AsahiKasei MF-K60X

 

Type: 

Blocked aliphatic polyisocyanate based on hexamethylene diisocyanate

Features:

# Low curing temperature (90’c for base coat application)

# Good storage stability

Applications:

# One-component applications

# Plastic coatings (curing-temp. 90″c for base coat)

# Base coat for automotive bumper

Typical properties

Appearance

Colorless to slightly yellowish clear liquid

Non-volatile

60 wt%

Solvent

Xylene / n-Butanol=15 / 25 (wt%)

Blocked NCO content

6.5 wt%

Viscosity

200 mPa .s at 25C

Color value

<1 (Gardner)

NCO equivalent weight

Approx.646

Flash point

21.1°C

Compatibility:

 

Mixing ratio of DURANATETM MF-K60X with polyols is based on NCO/OH equivalentratio of 1/1.

These values provide general information and are not part of the product specifications.

S.S. of film cured by MF-K60X

Formulation :

  • Polyol : manufactured and sold by Akzo

Polyester Polyol; Setal 90173 (OH%=2.27wt%,NV=50wt%)

Acrylic Polyol; Setalux 1184(OH%=2.0wt%,NV=52wt%)

  • Blocked Polyisocyanate : DURANATETM MF-K60X

  • NCO J OH = 1.0

Bake: 30min.

High curing speed

Curing speed of MF-K60X is faster than that of melamine.

Storage stability of paint using MF-K60X

 

1. Formulation : Polyol : Acrylic Polyol A801

(manufactured and sold by DIC OHV = 100 mgKOH/g Resin )

·Blocked Polyisocyanate : DURANATETM MF-K60X

·NCO  OH = 1.0

2. Storage condition : 40’C under Nitrogen

3.Measurement of Viscosity : Ford Cup #4 at 20°C

 

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI closed  Covesro BL 3370

HDI closed  Covesro BL 3370

 

ABOUT:

Blocked aliphatic HDI-polyisocyanate. To formulate lightfast one-component stoving polyurethane coatings with high themal yellowing resistance; as an additive to improve flexibility and adhesion.

Product Types:

  • HDI

  • PIC

  • Aliphatic polyisocyanate

  • Crosslinkers

  • Polyisocyanate

  • Hardeners

  • Polyisocyanurate

  • Isocyanate

Material:

Coatings, paints & inks

Solventborne, Flexible, Thermally resistant, Elastic

General Characterization:

Desmodur BL 3370 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).

It is suitable for use in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings with high resistance to thermal yellowing; as an additive in conventional stoving coating systems to improve the reactivity, flexibility and adhesion.

Storage Conditions:

Desmodur BL 3370 MPA should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product. Recommended storage temperature is 0º-30ºC.

Characteristics:

Property Name

Test Method

Unit

Value

Density

g/cm^3

approx. 1.08

Viscosity at 25^oC

mPa∙s

approx. 3,200

Equivalent weight

approx. 470

Flash point

°C

approx. 49

Blocked NCO content

%

approx. 8.9

 

Specifications:

Property Name

Test Method

Unit

Value

Non-volatile content (1 g / 60 min / 80^oC)

%

70 ± 3

Free NCO content

%

≤ 0.2

Viscosity at 23°C

mPa∙s

3,800 ± 1,200

Hazen color value

≤ 60

 

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

 

HDI closed  Covesro  PL 350  

HDI closed  Covesro  PL 350

 

ABOUT:

Blocked aliphatic polyisocyanate based on HDI.In combination with polyol components for the formulation of lightfast one-component polyurethane stoving coatings.

Product Types:

  • HDI

  • PIC

  • Aliphatic polyisocyanate

  • Crosslinkers

  • Polyisocyanate

  • Hardeners

  • Polyisocyanurate

  • Isocyanate

  • Reactive system

Material:

Coatings, paints & inks

Weather resistant, Solventborne, Flexible, Thermally resistant, Elastic

General Characterization:

Desmodur PL 350 MPA/SN is a blocked aliphatic polyisocyanate based on HDI.

It is suitable for use in combination with polyol components for the formulation of lightfast one-component polyurethane stoving coatings.

 

Storage Conditions:

Desmodur PL 350 MPA/SN should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product. Recommended storage temperature is 0º-30ºC.

Characteristics:

Property Name

Test Method

Unit

Value

Blocked NCO content

%

approx. 10.5

Density at 20°C

g/cm^3

approx. 1.10

Flash point

°C

approx. 53

Equivalent weight

approx. 400

Specifications:

Property Name

Test Method

Unit

Value

Non-volatile content (0.2 g / 60 min / 80^oC)

%

75 ± 2

Color value

≤ 100

Viscosity at 23^oC

mPa∙s

4,300 ± 1,500

 

Packaging: 

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI closed  Covesro  BL 3575/1

HDI closed  Covesro  BL 3575/1

 

ABOUT:

Blocked aliphatic polyisocyanate based on HDI.In combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings.

Product Types:

  • HDI

  • PIC

  • Aliphatic polyisocyanate

  • Crosslinkers

  • Polyisocyanate

  • Hardeners

  • Polyisocyanurate

  • Isocyanate

 

Material:

Coatings, paints & inks:Solventborne, Flexible, Thermally resistant, Elastic

General Characterization:

Blocked aliphatic polyisocyanate based on HDI.

In combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings.

Storage Conditions:

– Storage in original sealed Covestro container.

– Recommended storage temperature: 0 – 30 °C.

– Protect from moisture, heat and foreign material.

General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.

Sampling:

No data available

Characteristics:

Property Name

Test Method

Unit

Value

Flash point

DIN EN ISO 13 736

°C

approx. 53

NCO content, blocked

%

approx. 10.5

Equivalent weight

approx. 400

Density at 20 °C

DIN EN ISO 2811

g/ml

approx. 1.1

 

Specifications:

Property Name

Test Method

Unit

Value

Non-volatile content (0.2 g/60 min/80 °C)

DIN EN ISO 3251

%

75 ± 2

Viscosity at 23 °C

DIN EN ISO 3219/A.3

mPa*s

3,600 ± 1,000

Hazen color value

DIN EN 1557

≤ 100

 

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

 

HDI Diourea Covesro N75

HDI Diourea Covesro N75

 

ABOUT:

Aliphatic polyisocyanate (HDI biuret).As the hardener component for lightfast polyurethane coating systems.

Product Types

  • HDI

  • PIC

  • Aliphatic polyisocyanate

  • Crosslinkers

  • Polyisocyanate

  • Hardeners

  • Polyisocyanurate

  • Isocyanate

Material:

Coatings, paints & inks:High functional, Weather resistant, Low viscous, Solventborne

General Characterization:

Aliphatic polyisocyanate (HDI biuret).

As the hardener component for lightfast polyurethane coating systems.

Characteristics:

Property Name

Test Method

Unit

Value

Equivalent weight

approx. 255

Viscosity at 25 °C

M014-ISO 3219/A.3

mPa*s

approx. 140

Flash point

DIN 53 213/1

°C

approx. 35

Density at 20 °C

DIN EN ISO 2811

g/ml

approx. 1.07

Specifications:

Property Name

Test Method

Unit

Value

Viscosity at 23 °C

M014-ISO 3219/A.3

mPa*s

160 ± 50

NCO content

M105-ISO 11909

%

16.5 ± 0.3

Color value (Hazen)

M017-EN 1557

≤ 40

Non-volatile content (2.2 g/120 min/100 °C)

M020-ISO 3251

%

75 ± 1

Monomeric HDI

M106-ISO 10283

%

< 0.38

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Diourea Attica AL75

HDI Diourea Attica AL75

 

ABOUT:

Characterization Aliphatic polyisocyanate (HDI biuret).

Form supplied approx. 75 % in 1-methoxypropylacetate-2/xylene, 1 : 1 Used primarily as

the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Preferred co-reactants are polyacrylate or polyester polyols.

Specification 

Property

Unit of measurement

Value

Method

NCO content

%

16.2 – 16.8

M105 – ISO 11909s

Non-volatile content 2.2 g / 120 min / 100 °C

%

74.0 – 76.0

M020 – ISO 3251

Viscosity at 23 °C

mPa·s

250 ± 75

M014 – ISO 3219/A.3

Monomeric HDI

%

0.5 Max

M106 – ISO 10283

The main applications for systems based on ATTONATE AL 75 are as air- and force-drying coatings for automotive and industrial finishing, for wood, furniture and plastics and for corrosion protection.

The product is used mainly as a hardener in coating materials or adhesives

Storage :

12 month at the temperature from 0 to 30℃

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Waterborne Covesro XP2700  

HDI Waterborne Covesro XP2700

 

ABOUT:

Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).As a hardener for aqueous two-component polyurethane systems.

Product Types:

No data available

Material:

No data available

General Characterization:

Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).

As a hardener for aqueous two-component polyurethane systems.

Logistics and Handling

Storage Conditions:

– Storage in original sealed Covestro container.

– Recommended storage temperature: 0 – 30 °C.

– Protect from moisture, heat and foreign material.

General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The accessof water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead todangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.

Sampling:

No data available

 

Technical Properties & Datasheets

Characteristics:

Property Name

Test Method

Unit

Value

Density at 20 °C

DIN 51 757

g/cm3

approx. 1.07

Equivalent weight

approx. 396

Flash point

DIN EN ISO 2719

°C

approx. 61

 

Specifications:

Property Name

Test Method

Unit

Value

Hazen color value

DIN EN 1557

≤ 150

Monomeric HDI content

DIN EN ISO 10 283

% by wt.

< 0.1

Non-volatile content (2.2 g / 120 min / 100°C)

DIN EN ISO 3251

%

65 ± 2

Viscosity at 23 °C, (D = 200 s^-1)

DIN EN ISO 3219/A.3

mPa*s

75 ± 15

NCO content

DIN EN ISO 11 909

%

10.6 ± 0.3

 

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Quick drying AsahiKasei TFD-90SB

HDI Quick drying AsahiKasei TFD-90SB

 

ABOUT:

Product Class: Isocyanate

DURANATE TKA-90SB by Asahi Kasei is a hexamethylene diisocyanate (HDI) trimer compatible with urethanes. Acts as a curing agent. Exhibits excellent weatherability, good chemical & abrasion resistance, good compatibility and drying properties. Offers excellent color retention and outstanding performance. Suitable for coatings for automotive, architectural, industrial, consumer electronic and information technology. Other applications of DURANATE TKA-90SB may include gravure, offset and screen inks.

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]