Month: November 2023

Dabco RP204/reactive tertiary amine catalyst

Dabco RP204/reactive tertiary amine catalyst

Overview:

Product Name: Dabco RP204

Alias: Dabco RP204, reactive tertiary amine catalysts, reactive catalysts, Dabco reactive catalysts

Product Description: DABCO RP204 Bulk Sponge Low Odor Polyurethane Catalysts

Product Physical Properties:

Appearance: colorless liquid

Viscosity (25℃,mPa.s): 150

Density (25℃,g/cm3): 0.997

Water solubility: soluble in water

Flash point (PMCC,℃): 124

Hydroxyl value (mgKOH/g): 640

Product Usage:

Dabco RP204 is a reactive tertiary amine catalyst for balancing the reaction of urethanes with that of ureas, with high catalytic efficiency and a wide range of uses;

For flexible polyurethane block foams in a range of densities Dabco RP204 catalyst can be used in amounts from 40% to 70% of Dabco 33LV;

Dabco RP204 homogenizes the density of the cellular foam and stabilizes the foam properties with virtually no VOC emissions.

Description.

DABCO RP204 Low Odor Catalyst is a highly efficient, low-odor polyurethane foam catalyst that reduces the odor of polyurethane foamed products by reacting with isocyanates due to the presence of reactive functional groups.DABCO RP204 Low Odor Catalyst has good process latitude for the production of soft, low-odor polyurethane block sponges of varying densities in quantities of approximately 40-70% of standard liquid amine (DABCO 33-LV) and approximately 40-70% of standard liquid amine (DABCO 33-LV). (DABCO 33-LV) at approximately 40-70% of standard liquid amines.

Typical Physical Properties.

Appearance Colorless transparent liquid

Specific gravity 1.0

Viscosity @25°C mPa.s 150

Water solubility @25℃ completely soluble

Flash point, ℃ ＞100

Characteristics

Low odor balanced catalyst, can increase the process operation tolerance

Good foam stability, reduce density distribution, increase foam height

Reactive polyurethane catalyst

Wide coverage density range: 7-35Kg/m3

Recommendations for use.

DABCO RP204 Low Odor Catalyst can be used in a variety of applications for polyurethane foamed bulk sponges. Its dosage varies with formulation and foaming equipment.

DABCO RP204 Low Odor Catalyst can also be used in low odor applications for polyurethane rigid foams, polyurethane sealants, polyurethane waterproof coatings, polyurethane insulated tubes/boards, and polyurethane panels.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

reactive catalyst/Dabco reactive catalyst

reactive catalyst/Dabco reactive catalyst

Overview:

Product Name: Dabco RP204

Alias: Dabco RP204, reactive tertiary amine catalysts, reactive catalysts, Dabco reactive catalysts

Product Description: DABCO RP204 Bulk Sponge Low Odor Polyurethane Catalysts

Product Physical Properties:

Appearance: colorless liquid

Viscosity (25℃,mPa.s): 150

Density (25℃,g/cm3): 0.997

Water solubility: soluble in water

Flash point (PMCC,℃): 124

Hydroxyl value (mgKOH/g): 640

Product Usage:

Dabco RP204 is a reactive tertiary amine catalyst for balancing the reaction of urethanes with that of ureas, with high catalytic efficiency and a wide range of uses;

For flexible polyurethane block foams in a range of densities Dabco RP204 catalyst can be used in amounts from 40% to 70% of Dabco 33LV;

Dabco RP204 homogenizes the density of the cellular foam and stabilizes the foam properties with virtually no VOC emissions.

Description.

DABCO RP204 Low Odor Catalyst is a highly efficient, low-odor polyurethane foam catalyst that reduces the odor of polyurethane foamed products by reacting with isocyanates due to the presence of reactive functional groups.DABCO RP204 Low Odor Catalyst has good process latitude for the production of soft, low-odor polyurethane block sponges of varying densities in quantities of approximately 40-70% of standard liquid amine (DABCO 33-LV) and approximately 40-70% of standard liquid amine (DABCO 33-LV). (DABCO 33-LV) at approximately 40-70% of standard liquid amines.

Typical Physical Properties.

Appearance Colorless transparent liquid

Specific gravity 1.0

Viscosity @25°C mPa.s 150

Water solubility @25℃ completely soluble

Flash point, ℃ ＞100

Characteristics

Low odor balanced catalyst, can increase the process operation tolerance

Good foam stability, reduce density distribution, increase foam height

Reactive polyurethane catalyst

Wide coverage density range: 7-35Kg/m3

Recommendations for use.

DABCO RP204 Low Odor Catalyst can be used in a variety of applications for polyurethane foamed bulk sponges. Its dosage varies with formulation and foaming equipment.

DABCO RP204 Low Odor Catalyst can also be used in low odor applications for polyurethane rigid foams, polyurethane sealants, polyurethane waterproof coatings, polyurethane insulated tubes/boards, and polyurethane panels.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco DC5LE/reaction type delayed catalyst

Dabco DC5LE/reaction type delayed catalyst

Overview:

Product Name: Dabco DC5LE

Alias: Dabco DC5LE, reactive delayed catalyst, reactive catalyst, delayed catalyst, Dabco delayed catalyst, delayed strong gel catalyst

Product Description: Low Emission Catalyst for Polyurethane Automotive NVH Foams Dabco DC5LE

Product Physical Properties:

Appearance: yellow liquid

Viscosity (25℃,mPa.s): 4300

Density (25℃,g/cm3): 1.08

Water solubility: insoluble in water

Flash point (PMCC,℃): 178

Hydroxyl value (mgKOH/g): 138

Dabco DC5LE Reactive Delayed Catalyst Dabco DC5LE Reactive Catalyst DC5LE Delayed Catalyst DC5LE Dabco Delayed Catalyst DC5LE Delayed Strong Gel Catalyst

Profile.

Dabco DC5LE catalyst is a low-emission reactive delayed catalyst that promotes emulsification time and maintains low activity.Dabco DC5LE catalyst strongly promotes urethane (polyol-isocyanate) reactions without increasing amine emissions, and can be used to meet automotive OEM emission standards, such as VDA278.Dabco DC5LE catalysts have a forgiving Dabco DC5LE catalysts are available in a wide range of formulations to accommodate desired processing and reactivity requirements.

Typical Physical Properties Table.

Appearance Clear yellow liquid

Specific Gravity 1.08

Viscosity @ 25°C mPa.s 4300

Water solubility @25°C Insoluble

Flash Point, °C 178

Characteristics

Low emission reaction delay catalyst

Maintains slow foaming reaction time

Strongly promotes urethane (polyol-isocyanate) reaction

Wide range of applications, especially for NVH formulations

Recommendations for use.

Dabco DC5LE catalyst is recommended for use as a co-catalyst in soft, hard and CASE materials, especially for NVH formulations.

Dabco DC5LE catalysts are formulation tolerant and can be used in a wide range of applications to suit the required processing and reactivity requirements.

Product Usage:

Dabco DC5LE is a co-catalyst for low emission reaction delays;

Dabco DC5LE provides a strong boost to urethane (polyol-isocyanate) reactions while keeping emulsion time and service life unchanged;

Dabco DC5LE does not increase amine emissions and can be used in polyurethane foams that are required to meet automotive OEM emission regulations such as VDA 278;

Dabco DC5LE can be used as a co-catalyst in flexible, rigid and CASE materials and is particularly suitable for NVH formulations.

Shelf Life.

Keep unopened for two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

reaction type catalyst/delay type catalyst

reaction type catalyst/delay type catalyst

Overview:

Product Name: Dabco DC5LE

Alias: Dabco DC5LE, reactive delayed catalyst, reactive catalyst, delayed catalyst, Dabco delayed catalyst, delayed strong gel catalyst

Product Description: Low Emission Catalyst for Polyurethane Automotive NVH Foams Dabco DC5LE

Product Physical Properties:

Appearance: yellow liquid

Viscosity (25℃,mPa.s): 4300

Density (25℃,g/cm3): 1.08

Water solubility: insoluble in water

Flash point (PMCC,℃): 178

Hydroxyl value (mgKOH/g): 138

Dabco DC5LE Reactive Delayed Catalyst Dabco DC5LE Reactive Catalyst DC5LE Delayed Catalyst DC5LE Dabco Delayed Catalyst DC5LE Delayed Strong Gel Catalyst

Profile.

Dabco DC5LE catalyst is a low-emission reactive delayed catalyst that promotes emulsification time and maintains low activity.Dabco DC5LE catalyst strongly promotes urethane (polyol-isocyanate) reactions without increasing amine emissions, and can be used to meet automotive OEM emission standards, such as VDA278.Dabco DC5LE catalysts have a forgiving Dabco DC5LE catalysts are available in a wide range of formulations to accommodate desired processing and reactivity requirements.

Typical Physical Properties Table.

Appearance Clear yellow liquid

Specific Gravity 1.08

Viscosity @ 25°C mPa.s 4300

Water solubility @25°C Insoluble

Flash Point, °C 178

Characteristics

Low emission reaction delay catalyst

Maintains slow foaming reaction time

Strongly promotes urethane (polyol-isocyanate) reaction

Wide range of applications, especially for NVH formulations

Recommendations for use.

Dabco DC5LE catalyst is recommended for use as a co-catalyst in soft, hard and CASE materials, especially for NVH formulations.

Dabco DC5LE catalysts are formulation tolerant and can be used in a wide range of applications to suit the required processing and reactivity requirements.

Product Usage:

Dabco DC5LE is a co-catalyst for low emission reaction delays;

Dabco DC5LE provides a strong boost to urethane (polyol-isocyanate) reactions while keeping emulsion time and service life unchanged;

Dabco DC5LE does not increase amine emissions and can be used in polyurethane foams that are required to meet automotive OEM emission regulations such as VDA 278;

Dabco DC5LE can be used as a co-catalyst in flexible, rigid and CASE materials and is particularly suitable for NVH formulations.

Shelf Life.

Keep unopened for two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco delay type catalyst/delay type strong gel catalyst

Dabco delay type catalyst/delay type strong gel catalyst

Overview:

Product Name: Dabco DC5LE

Alias: Dabco DC5LE, reactive delayed catalyst, reactive catalyst, delayed catalyst, Dabco delayed catalyst, delayed strong gel catalyst

Product Description: Low Emission Catalyst for Polyurethane Automotive NVH Foams Dabco DC5LE

Product Physical Properties:

Appearance: yellow liquid

Viscosity (25℃,mPa.s): 4300

Density (25℃,g/cm3): 1.08

Water solubility: insoluble in water

Flash point (PMCC,℃): 178

Hydroxyl value (mgKOH/g): 138

Dabco DC5LE Reactive Delayed Catalyst Dabco DC5LE Reactive Catalyst DC5LE Delayed Catalyst DC5LE Dabco Delayed Catalyst DC5LE Delayed Strong Gel Catalyst

Profile.

Dabco DC5LE catalyst is a low-emission reactive delayed catalyst that promotes emulsification time and maintains low activity.Dabco DC5LE catalyst strongly promotes urethane (polyol-isocyanate) reactions without increasing amine emissions, and can be used to meet automotive OEM emission standards, such as VDA278.Dabco DC5LE catalysts have a forgiving Dabco DC5LE catalysts are available in a wide range of formulations to accommodate desired processing and reactivity requirements.

Typical Physical Properties Table.

Appearance Clear yellow liquid

Specific Gravity 1.08

Viscosity @ 25°C mPa.s 4300

Water solubility @25°C Insoluble

Flash Point, °C 178

Characteristics

Low emission reaction delay catalyst

Maintains slow foaming reaction time

Strongly promotes urethane (polyol-isocyanate) reaction

Wide range of applications, especially for NVH formulations

Recommendations for use.

Dabco DC5LE catalyst is recommended for use as a co-catalyst in soft, hard and CASE materials, especially for NVH formulations.

Dabco DC5LE catalysts are formulation tolerant and can be used in a wide range of applications to suit the required processing and reactivity requirements.

Product Usage:

Dabco DC5LE is a co-catalyst for low emission reaction delays;

Dabco DC5LE provides a strong boost to urethane (polyol-isocyanate) reactions while keeping emulsion time and service life unchanged;

Dabco DC5LE does not increase amine emissions and can be used in polyurethane foams that are required to meet automotive OEM emission regulations such as VDA 278;

Dabco DC5LE can be used as a co-catalyst in flexible, rigid and CASE materials and is particularly suitable for NVH formulations.

Shelf Life.

Keep unopened for two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco MP601/delayed polyurethane catalyst

Dabco MP601/delayed polyurethane catalyst

Overview:

Product Name: Dabco MP601

Alias: Dabco MP601, Delayed Polyurethane Catalyst, Dabco Delayed Polyurethane Catalyst, Dabco Delayed Catalyst

Product Description: Dabco MP601 Delayed Polyurethane Catalysts

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):183.3

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 84

Hydroxyl value (mgKOH/g): 546

Brief introduction.

Dabco MP601 catalyst is a balanced tertiary amine with delayed polyurethane foaming developed for fast release polyurethane high resilience (HR) molded foam systems. Dabco MP601 catalyst provides an effective balanced reaction for complex parts with flowability, which can help customers reduce cycle times and increase productivity.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 1.09

Viscosity @25℃ mPa.s 183

Water solubility @25°C Fully soluble

Flash point, ℃ 84

Features.

Delayed polyurethane foaming time, fluidity, can be used in complex molding molds for high resilience sponges

Balanced polyurethane catalyst, wide process operating range

Reduced demolding time for increased productivity

Suitable for a wide range of TDI, T/M, M/T and MDI system polyurethane foams.

Recommendations for use.

Dabco MP601 Catalyst can be used to manufacture all types of polyurethane high resilience foam moldings.

Dabco MP601 Catalyst can be combined with other polyurethane catalyst products to achieve process performance.

Product Usage:

DABCO MP601 is a tertiary amine catalyst with both delayed and balanced properties developed for fast release high resilience (HR) molded foam systems;

DABCO MP601 provides an effective balance of reactivity with excellent flow and open-cell properties for rapid release systems to help customers reduce cycle time and increase productivity.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco delayed polyurethane catalyst/Dabco delayed catalyst

Dabco delayed polyurethane catalyst/Dabco delayed catalyst

Overview:

Product Name: Dabco MP601

Alias: Dabco MP601, Delayed Polyurethane Catalyst, Dabco Delayed Polyurethane Catalyst, Dabco Delayed Catalyst

Product Description: Dabco MP601 Delayed Polyurethane Catalysts

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):183.3

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 84

Hydroxyl value (mgKOH/g): 546

Brief introduction.

Dabco MP601 catalyst is a balanced tertiary amine with delayed polyurethane foaming developed for fast release polyurethane high resilience (HR) molded foam systems. Dabco MP601 catalyst provides an effective balanced reaction for complex parts with flowability, which can help customers reduce cycle times and increase productivity.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 1.09

Viscosity @25℃ mPa.s 183

Water solubility @25°C Fully soluble

Flash point, ℃ 84

Features.

Delayed polyurethane foaming time, fluidity, can be used in complex molding molds for high resilience sponges

Balanced polyurethane catalyst, wide process operating range

Reduced demolding time for increased productivity

Suitable for a wide range of TDI, T/M, M/T and MDI system polyurethane foams.

Recommendations for use.

Dabco MP601 Catalyst can be used to manufacture all types of polyurethane high resilience foam moldings.

Dabco MP601 Catalyst can be combined with other polyurethane catalyst products to achieve process performance.

Product Usage:

DABCO MP601 is a tertiary amine catalyst with both delayed and balanced properties developed for fast release high resilience (HR) molded foam systems;

DABCO MP601 provides an effective balance of reactivity with excellent flow and open-cell properties for rapid release systems to help customers reduce cycle time and increase productivity.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco MP602/delayed amine catalyst

Dabco MP602/delayed amine catalyst

Overview:

Product Name: Dabco MP602

Alias: Dabco MP602, Delayed Amine Catalyst, Non-Emitting Amine Catalyst, Non-Emitting Delayed Amine Catalyst, Dabco Amine Catalyst, Non-Emitting Gel Catalyst, Non-Emitting Amine Catalyst

Product Description: Dabco MP602 Non-Emitting Delayed Gel Catalyst

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):80

Density (25℃,g/cm3): 0.96

Water solubility: soluble in water

Flash point (PMCC,℃): 103

Hydroxyl value (mgKOH/g): 310

Brief introduction.

Dabco MP602 Delayed Catalyst is a delayed-containment, non-emissive tertiary amine that primarily promotes urethane (polyol-isocyanate) reactions.Dabco MP602 Delayed Catalyst was developed for use in polyurethane cold curing foam molding systems.Dabco MP602 Delayed Catalyst reacts via chemical bonding into the polyurethane foam substrate while maintaining or improving foam properties in the molded foam system.Dabco MP602 Delayed Catalyst has been developed for use in polyurethane cold curing foaming systems. Foam Performance in Molded Foam Systems.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 0.96

Viscosity @ 25°C mPa.s 80

Water solubility @25℃ completely soluble

Flash point, ℃ 103

Characteristics

Non-emitting polyurethane catalyst

Provides good surface cure for faster mold release and increased productivity

Suggestions for Use: Dabco MP602 Delayed Catalyst

Dabco MP602 Delayed Catalyst is used as a co-catalyst in polyurethane foam molding applications in conjunction with regular polyurethane catalysts or other non-emissive catalysts to facilitate mold release or improve skin appearance.

In polyurethane foam systems for cold curing high resilience sponges, Dabco MP602 Delayed Catalyst is recommended at a usage level of 0.10-0.40 pphp. For performance, Dabco MP602 Delayed Catalyst should be used in combination with Dabco MP601 Delayed Catalyst. If required to meet OEM emissions testing, we recommend the use of Dabco NE1070, Dabco NE300 and Dabco MP602 Delay Catalyst.

Product Usage:

Dabco MP602 is a non-emitting, delayed reaction amine catalyst primarily used to promote urethane (polyol-isocyanate) reactions; Dabco MP602 chemically binds to the polyurethane foam matrix while still maintaining or even improving foam properties in molded foam systems;

Dabco MP602 provides good skin curing and rapid mold release for improved productivity;

Dabco MP602 can be used in both cold and heat cured flexible molded polyurethane foam systems;

The recommended dosage of Dabco MP602 is 0.1-0.4 PPHP (per 100 parts of polyol), and Dabco MP602 can be used in conjunction with Dabco MP601 for better product performance.

Shelf life.

Keep unopened for two years

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

non-emission amine catalyst/non-emission delayed amine catalyst

non-emission amine catalyst/non-emission delayed amine catalyst

Overview:

Product Name: Dabco MP602

Alias: Dabco MP602, Delayed Amine Catalyst, Non-Emitting Amine Catalyst, Non-Emitting Delayed Amine Catalyst, Dabco Amine Catalyst, Non-Emitting Gel Catalyst, Non-Emitting Amine Catalyst

Product Description: Dabco MP602 Non-Emitting Delayed Gel Catalyst

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):80

Density (25℃,g/cm3): 0.96

Water solubility: soluble in water

Flash point (PMCC,℃): 103

Hydroxyl value (mgKOH/g): 310

Brief introduction.

Dabco MP602 Delayed Catalyst is a delayed-containment, non-emissive tertiary amine that primarily promotes urethane (polyol-isocyanate) reactions.Dabco MP602 Delayed Catalyst was developed for use in polyurethane cold curing foam molding systems.Dabco MP602 Delayed Catalyst reacts via chemical bonding into the polyurethane foam substrate while maintaining or improving foam properties in the molded foam system.Dabco MP602 Delayed Catalyst has been developed for use in polyurethane cold curing foaming systems. Foam Performance in Molded Foam Systems.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 0.96

Viscosity @ 25°C mPa.s 80

Water solubility @25℃ completely soluble

Flash point, ℃ 103

Characteristics

Non-emitting polyurethane catalyst

Provides good surface cure for faster mold release and increased productivity

Suggestions for Use: Dabco MP602 Delayed Catalyst

Dabco MP602 Delayed Catalyst is used as a co-catalyst in polyurethane foam molding applications in conjunction with regular polyurethane catalysts or other non-emissive catalysts to facilitate mold release or improve skin appearance.

In polyurethane foam systems for cold curing high resilience sponges, Dabco MP602 Delayed Catalyst is recommended at a usage level of 0.10-0.40 pphp. For performance, Dabco MP602 Delayed Catalyst should be used in combination with Dabco MP601 Delayed Catalyst. If required to meet OEM emissions testing, we recommend the use of Dabco NE1070, Dabco NE300 and Dabco MP602 Delay Catalyst.

Product Usage:

Dabco MP602 is a non-emitting, delayed reaction amine catalyst primarily used to promote urethane (polyol-isocyanate) reactions; Dabco MP602 chemically binds to the polyurethane foam matrix while still maintaining or even improving foam properties in molded foam systems;

Dabco MP602 provides good skin curing and rapid mold release for improved productivity;

Dabco MP602 can be used in both cold and heat cured flexible molded polyurethane foam systems;

The recommended dosage of Dabco MP602 is 0.1-0.4 PPHP (per 100 parts of polyol), and Dabco MP602 can be used in conjunction with Dabco MP601 for better product performance.

Shelf life.

Keep unopened for two years

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

non-emission delayed amine catalyst/Dabco amine catalyst

non-emission delayed amine catalyst/Dabco amine catalyst

Overview:

Product Name: Dabco MP602

Alias: Dabco MP602, Delayed Amine Catalyst, Non-Emitting Amine Catalyst, Non-Emitting Delayed Amine Catalyst, Dabco Amine Catalyst, Non-Emitting Gel Catalyst, Non-Emitting Amine Catalyst

Product Description: Dabco MP602 Non-Emitting Delayed Gel Catalyst

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):80

Density (25℃,g/cm3): 0.96

Water solubility: soluble in water

Flash point (PMCC,℃): 103

Hydroxyl value (mgKOH/g): 310

Brief introduction.

Dabco MP602 Delayed Catalyst is a delayed-containment, non-emissive tertiary amine that primarily promotes urethane (polyol-isocyanate) reactions.Dabco MP602 Delayed Catalyst was developed for use in polyurethane cold curing foam molding systems.Dabco MP602 Delayed Catalyst reacts via chemical bonding into the polyurethane foam substrate while maintaining or improving foam properties in the molded foam system.Dabco MP602 Delayed Catalyst has been developed for use in polyurethane cold curing foaming systems. Foam Performance in Molded Foam Systems.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 0.96

Viscosity @ 25°C mPa.s 80

Water solubility @25℃ completely soluble

Flash point, ℃ 103

Characteristics

Non-emitting polyurethane catalyst

Provides good surface cure for faster mold release and increased productivity

Suggestions for Use: Dabco MP602 Delayed Catalyst

Dabco MP602 Delayed Catalyst is used as a co-catalyst in polyurethane foam molding applications in conjunction with regular polyurethane catalysts or other non-emissive catalysts to facilitate mold release or improve skin appearance.

In polyurethane foam systems for cold curing high resilience sponges, Dabco MP602 Delayed Catalyst is recommended at a usage level of 0.10-0.40 pphp. For performance, Dabco MP602 Delayed Catalyst should be used in combination with Dabco MP601 Delayed Catalyst. If required to meet OEM emissions testing, we recommend the use of Dabco NE1070, Dabco NE300 and Dabco MP602 Delay Catalyst.

Product Usage:

Dabco MP602 is a non-emitting, delayed reaction amine catalyst primarily used to promote urethane (polyol-isocyanate) reactions; Dabco MP602 chemically binds to the polyurethane foam matrix while still maintaining or even improving foam properties in molded foam systems;

Dabco MP602 provides good skin curing and rapid mold release for improved productivity;

Dabco MP602 can be used in both cold and heat cured flexible molded polyurethane foam systems;

The recommended dosage of Dabco MP602 is 0.1-0.4 PPHP (per 100 parts of polyol), and Dabco MP602 can be used in conjunction with Dabco MP601 for better product performance.

Shelf life.

Keep unopened for two years

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com