Pentamethyldiethylenetriamine/CAS 3030-47-5

Pentamethyldiethylenetriamine/CAS 3030-47-5

Overview:

Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a highly efficient catalyst for polyurethane soft foams and is used in the formulation of soft foam products, and can also be used as an auxiliary catalyst for hard foams to improve the fluidity of PU foams for large-capacity refrigerators.

Chinese name N,N,N,N,N-Pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Synonyms 1,1,4,7,7-Pentamethyldiethylenetriamine, Pentamethyldiethylenetriamine, CAS 3030-47-5, Polycat 5, Niax C-5, Jeffcat PMDETA, Lupragen N301, Tegoamin PMDETA, PC CAT PMDETA, Addocat PV, Toyocat DT, Polycat 5 Catalyst, Hard Foam Catalyst PC5

Chemical formula C9H23N3

Molecular weight 173.3

CAS No. 3030-47-5

Melting point -20℃

Boiling point 198℃

Water solubility Soluble in water, ether and alcohol solvents.

Appearance Colorless or yellowish transparent liquid

Flash Point 53℃

MDL No.: MFCD00014876

Refractive index: 1.442(lit.)

Physical properties of pentamethyldiethylenetriamine:

English name: N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Molecular formula: C9H23N3

Molecular weight: 173.3

Physical and Chemical Properties

Pentamethyldiethylenetriamine is colorless to light yellow clear liquid, easily soluble in water.

Purity: 98.0%.

Viscosity (25℃): 2mPa.s

Relative density (20℃): 0.8302-0.8306

Flash point (closed loop): about 72°C

Flash point (PMCC): 83.3°C

Boiling range: 196-201℃ or 70-80℃(1100Pa)

Vapor pressure (21℃): 0.29*133pa

Freezing point: <-20℃

Preparation method

Pentamethyldivinyltriamine is generally obtained by N-methylation of diethylenetriamine as raw material, and the methylation methods include formic acid/formaldehyde method and formaldehyde hydrogenation method.

Properties and uses:

Pentamethyldiethylenetriamine is a highly active and strong foaming polyurethane catalyst, which can also be used to balance the overall foaming and gel reaction. It is widely used in all kinds of polyurethane rigid foam, including polyisocyanuric acid sheet rigid foam, also can improve the foam fluidity, so it can improve the production process and product quality. Pentamethyldivinyltriamine can also be used alone as a catalyst in polyurethane foam formulations or in combination with other catalysts such as DNCHA. When used alone as a catalyst for rigid foam, the dosage range is 1.0-2.0 parts per 100 parts per mass of polyol. In addition to its use in rigid foam formulations, Pentamethyldiethylenetriamine can also be used in the production of polymeter-type polyurethane flexible block foams and molded foams.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

180KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

N,N,N’,N”,N”-Pentamethyldiethylenetriamine/PMDETA

N,N,N’,N”,N”-Pentamethyldiethylenetriamine/PMDETA

Overview:

Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a highly efficient catalyst for polyurethane soft foams and is used in the formulation of soft foam products, and can also be used as an auxiliary catalyst for hard foams to improve the fluidity of PU foams for large-capacity refrigerators.

Chinese name N,N,N,N,N-Pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Synonyms 1,1,4,7,7-Pentamethyldiethylenetriamine, Pentamethyldiethylenetriamine, CAS 3030-47-5, Polycat 5, Niax C-5, Jeffcat PMDETA, Lupragen N301, Tegoamin PMDETA, PC CAT PMDETA, Addocat PV, Toyocat DT, Polycat 5 Catalyst, Hard Foam Catalyst PC5

Chemical formula C9H23N3

Molecular weight 173.3

CAS No. 3030-47-5

Melting point -20℃

Boiling point 198℃

Water solubility Soluble in water, ether and alcohol solvents.

Appearance Colorless or yellowish transparent liquid

Flash Point 53℃

MDL No.: MFCD00014876

Refractive index: 1.442(lit.)

Physical properties of pentamethyldiethylenetriamine:

English name: N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Molecular formula: C9H23N3

Molecular weight: 173.3

Physical and Chemical Properties

Pentamethyldiethylenetriamine is colorless to light yellow clear liquid, easily soluble in water.

Purity: 98.0%.

Viscosity (25℃): 2mPa.s

Relative density (20℃): 0.8302-0.8306

Flash point (closed loop): about 72°C

Flash point (PMCC): 83.3°C

Boiling range: 196-201℃ or 70-80℃(1100Pa)

Vapor pressure (21℃): 0.29*133pa

Freezing point: <-20℃

Preparation method

Pentamethyldivinyltriamine is generally obtained by N-methylation of diethylenetriamine as raw material, and the methylation methods include formic acid/formaldehyde method and formaldehyde hydrogenation method.

Properties and uses:

Pentamethyldiethylenetriamine is a highly active and strong foaming polyurethane catalyst, which can also be used to balance the overall foaming and gel reaction. It is widely used in all kinds of polyurethane rigid foam, including polyisocyanuric acid sheet rigid foam, also can improve the foam fluidity, so it can improve the production process and product quality. Pentamethyldivinyltriamine can also be used alone as a catalyst in polyurethane foam formulations or in combination with other catalysts such as DNCHA. When used alone as a catalyst for rigid foam, the dosage range is 1.0-2.0 parts per 100 parts per mass of polyol. In addition to its use in rigid foam formulations, Pentamethyldiethylenetriamine can also be used in the production of polymeter-type polyurethane flexible block foams and molded foams.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

180KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

High Quality 1,8-diazabicycloundec-7-ene / CAS 6674-22-2 / DBU

High Quality 1,8-diazabicycloundec-7-ene / CAS 6674-22-2 / DBU

Overview:

1,8-Diazabicycloundec-7-ene is a colorless to light yellow transparent oily liquid with relatively low volatility, almost odorless, and alkaline. It changes color easily when exposed to light, and is hygroscopic and corrosive.

Name: 1,8-Diazabicyclo[5.4.0]undec-7-ene(DBU)

Product English Name: 1,8-Diazabicyclo[5.4.0]undec-7-ene

Packing Price: 200kg/drum

Purity specification: 98

Product Category: Pharmaceutical raw materials

6674-22-2 DBU Azabicyclic Diazabicyclo[5.4.0]undec-7-ene

Chinese name: 1,8-Diazabicycloundecene, Diazabicyclo, DBU

English name: 1,8-Diazabicyclo(5.4.0)undec-7-ene

Alias: 1,8-Diazabicyclo undec-7-ene, CAS 6674-22-2, catalyst DBU, epoxy accelerator DBU, polyurethane catalyst DBU, azabicyclo, diazabicyclo, Polycat DBU, Lupragen N700, PC CAT DBU

Molecular Formula: C9H16N2

Relative molecular mass: 152.2

CAS No.: 6674-22-2

Physicochemical properties:

1,8-Diazabicyclohexadec-7-ene is colorless to light yellow transparent oily liquid with relatively low volatility, almost odorless and alkaline. It is easy to change color when exposed to light, hygroscopic and corrosive.

Relative density: 1.04~1.07

Viscosity (25℃): 14mPa.s

Water solubility: soluble in water

Flash point(TCC):>96°C

Properties and Uses:

1,8-Diazabicyclohexadec-7-ene is used as a catalyst in the polyurethane industry, it is a very active low-odor gel catalyst, mainly used in applications requiring strong gel catalysis, including formulations containing alicyclic isocyanates or aliphatic isocyanates, which are less active than aromatic isocyanates and therefore require very strong catalysts.

1,8-Diazabicycloundec-7-ene catalyst activity is significantly enhanced with increasing temperature, for example, the catalytic rate constants of DBU for isocyanate-alcohol and isocyanate-water reactions at 70 °C are 67 and 35 times higher than those at 25 °C, respectively, whereas the catalytic activity of the commonly used bicyclic tertiary amine catalyst triethylenediamine is increased to 5 and 6 times its original catalytic activity, respectively;.

The 1,8-diazabicycloundec-7-ene catalyst can be used in formulations for integral skin foams, microcellular elastomers, and rigid foams.

The main use of DBU is as an excellent organic base deacidifier for drug synthesis. It can replace organic bases such as triethylamine, N,N-dimethylphenylamine, pyridine and quinoline, and is widely used in organic synthesis and semi-synthetic antibiotics, and obtains more satisfactory results in the dehalogenation reaction. It is widely used in the production of cephalosporin semi-synthetic antimicrobial drugs, such as ammonia and dichloroethane in the presence of DBU reaction to produce piperazine. It can also be used for epoxy resin hardener, rust inhibitor, can be formulated with high slow corrosion inhibitor, catalyst for other chemical reactions.

DBU in the application of epoxy resin DBU in the room temperature to 40 ℃ range of almost no curing reaction with the epoxy resin, and the temperature rises to 100 ℃ in 15min can make the epoxy resin gel. In epoxy resins, DBU is mainly used as a curing accelerator for epoxy resins used in the encapsulation of integrated circuits and electronic components. When used in the form of DBU salt, DBU is dissociated from it when it is heated during encapsulation to promote curing.

The combination of DBU and linear phenolic resin is a light yellow solid, which changes the disadvantage of DBU being easily hydrolyzed in humid environment. Therefore it consists of epoxy molding compound for IC encapsulation with good resistance to humidity and heat and high pressure steaming performance.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. Shower and change clothes after work. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

1,8-diazabicycloundec-7-ene/CAS 6674-22-2/DBU

1,8-diazabicycloundec-7-ene/CAS 6674-22-2/DBU

Overview:

1,8-Diazabicycloundec-7-ene is a colorless to light yellow transparent oily liquid with relatively low volatility, almost odorless, and alkaline. It changes color easily when exposed to light, and is hygroscopic and corrosive.

Name: 1,8-Diazabicyclo[5.4.0]undec-7-ene(DBU)

Product English Name: 1,8-Diazabicyclo[5.4.0]undec-7-ene

Packing Price: 200kg/drum

Purity specification: 98

Product Category: Pharmaceutical raw materials

6674-22-2 DBU Azabicyclic Diazabicyclo[5.4.0]undec-7-ene

Chinese name: 1,8-Diazabicycloundecene, Diazabicyclo, DBU

English name: 1,8-Diazabicyclo(5.4.0)undec-7-ene

Alias: 1,8-Diazabicyclo undec-7-ene, CAS 6674-22-2, catalyst DBU, epoxy accelerator DBU, polyurethane catalyst DBU, azabicyclo, diazabicyclo, Polycat DBU, Lupragen N700, PC CAT DBU

Molecular Formula: C9H16N2

Relative molecular mass: 152.2

CAS No.: 6674-22-2

Physicochemical properties:

1,8-Diazabicyclohexadec-7-ene is colorless to light yellow transparent oily liquid with relatively low volatility, almost odorless and alkaline. It is easy to change color when exposed to light, hygroscopic and corrosive.

Relative density: 1.04~1.07

Viscosity (25℃): 14mPa.s

Water solubility: soluble in water

Flash point(TCC):>96°C

Properties and Uses:

1,8-Diazabicyclohexadec-7-ene is used as a catalyst in the polyurethane industry, it is a very active low-odor gel catalyst, mainly used in applications requiring strong gel catalysis, including formulations containing alicyclic isocyanates or aliphatic isocyanates, which are less active than aromatic isocyanates and therefore require very strong catalysts.

1,8-Diazabicycloundec-7-ene catalyst activity is significantly enhanced with increasing temperature, for example, the catalytic rate constants of DBU for isocyanate-alcohol and isocyanate-water reactions at 70 °C are 67 and 35 times higher than those at 25 °C, respectively, whereas the catalytic activity of the commonly used bicyclic tertiary amine catalyst triethylenediamine is increased to 5 and 6 times its original catalytic activity, respectively;.

The 1,8-diazabicycloundec-7-ene catalyst can be used in formulations for integral skin foams, microcellular elastomers, and rigid foams.

The main use of DBU is as an excellent organic base deacidifier for drug synthesis. It can replace organic bases such as triethylamine, N,N-dimethylphenylamine, pyridine and quinoline, and is widely used in organic synthesis and semi-synthetic antibiotics, and obtains more satisfactory results in the dehalogenation reaction. It is widely used in the production of cephalosporin semi-synthetic antimicrobial drugs, such as ammonia and dichloroethane in the presence of DBU reaction to produce piperazine. It can also be used for epoxy resin hardener, rust inhibitor, can be formulated with high slow corrosion inhibitor, catalyst for other chemical reactions.

DBU in the application of epoxy resin DBU in the room temperature to 40 ℃ range of almost no curing reaction with the epoxy resin, and the temperature rises to 100 ℃ in 15min can make the epoxy resin gel. In epoxy resins, DBU is mainly used as a curing accelerator for epoxy resins used in the encapsulation of integrated circuits and electronic components. When used in the form of DBU salt, DBU is dissociated from it when it is heated during encapsulation to promote curing.

The combination of DBU and linear phenolic resin is a light yellow solid, which changes the disadvantage of DBU being easily hydrolyzed in humid environment. Therefore it consists of epoxy molding compound for IC encapsulation with good resistance to humidity and heat and high pressure steaming performance.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. Shower and change clothes after work. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

High Quality CAS 108-01-0 / N,N-dimethyl ethanolamine / 2-(Dimethylamine)ethanol / DMEA / Dimethylethanolamine

High Quality CAS 108-01-0 / N,N-dimethyl ethanolamine / 2-(Dimethylamine)ethanol / DMEA / Dimethylethanolamine

Overview:

(N,N-Dimethylethanolamine) referred to as DMEA, is a colorless volatile liquid, ammonia odor, boiling point 134.6 ℃. Used in ion exchange resin; used in high purity water preparation and decolorization of sugar solution, three-waste treatment of film washing solution, etc.; used in polyurethane flexible block foam, molded foam and rigid foam, cathodic elastic foam, etc.; used as co-solvent of water-soluble paint, curing agent of polyurethane paint; the reaction product of microorganisms with acrylic acid is used as a flocculating agent of urban purified water field. This product has a violent irritating effect on eyes, skin, mucous membrane and upper respiratory tract. It can cause skin burns. Inhalation can cause inflammation, edema and spasm of the larynx and bronchial tubes, chemical pneumonia and pulmonary edema. Sensitizing effect on skin.

Chinese name Dimethylethanolamine

Foreign Name N,N-dimethyl ethanol amine

CAS NO 108-01-0

Appearance and properties Colorless to slightly yellow

N,N-dimethyl ethanol amine 108-01-0 Jeffcat DMEA Addocat DMEA Tegoamin DMEA

Chinese name: N,N-dimethylethanolamine, 2-dimethylaminoethanol

English name: N,N-dimethyl ethanolamine; 2-(Dimethylamine)ethanol

CAS NO: 108-01-0

Molecular formula: C4H11NO

Molecular weight: 89.14

Physical and chemical properties:

Dimethylethanolamine is colorless or light yellow liquid, soluble in water.

Relative density (25℃): 0.89

Viscosity (25℃): 6mPa.s

Hydroxyl value: 638mgKOH/g

Flash point (PMCC): 41°C

Applications:

Dimethylethanolamine is a reactive catalyst in polyurethane foam, often used as an auxiliary catalyst;

Dimethylethanolamine is often used in the formulation of polyurethane soft foam and polyurethane hard foam compositions, used to neutralize the acid in various compositions to ensure the activity of the catalyst in the compositions.

Dimethylethanolamine 108-01-0 Jeffcat DMEA Addocat DMEA Tegoamin DMEA

Storage and Transportation:

Should be kept sealed and stored in a dry, cool, ventilated warehouse.

Packaging:

180KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

Pentamethyldipropene Triamine/CAS 3855-32-1

Pentamethyldipropene Triamine/CAS 3855-32-1

Overview:

Pentamethyldipropylenetriamine, also known as N,N,N’,N”,N”-pentamethyldipropylenetriamine, molecular formula is C11H27N3, molecular weight is 201.3522, CAS registry number is 3855-32-1, a kind of chemical intermediates.

Chinese name

Pentamethyldipropenyltriamine

English Name

2,6,10-Trimethyl-2,6,10-triazaundecane

Alias

N,N,N’,N”,N”-Pentamethyldipropenyltriamine

Chemical formula

C11H27N3

Molecular weight

201.3522

CAS No.

3855-32-1

EINECS number

223-362-3

Pentamethyldipropylenetriamine

3855-32-1

Bis(dimethylaminopropyl)methylamine

Polycat 77

Toyocat PMA

Jeffcat ZR-40

Lupragen N302

PC CAT NP50

Synonyms: N,N,N’,N”,N”-Pentamethyldipropylenetriamine, Pentamethyldipropylidenetriamine, Bis(dimethylaminopropyl)methanamine

English name: Pentamethyldipropylenetriamine

Molecular Formula: C11H27N3

Relative molecular mass: 201.4

CAS No.: 3855-32-1

Physical and chemical properties:

Pentamethyldipropylenetriamine Appearance is colorless to light yellow low viscosity liquid, fishy odor. Soluble in water, aqueous solution is strongly alkaline.

Viscosity(25℃,mPa.s):3

Density (25℃,g/cm3): 0.85

Water solubility: soluble in water

Flash point (PMCC,℃): 92

Hydroxyl value (mgKOH/g): 0

Characteristics and Uses:

Pentamethyldipropylenetriamine is a tertiary amine catalyst that can balance the influence on the reaction between urethane (polyol-isocyanate) and urea (isocyanate-water) in a variety of flexible and rigid polyurethane foams;

Pentamethyldipropylenetriamine improves the open-cell nature of flexible foams and reduces the brittleness and adhesion of rigid foams;

Pentamethyldipropylenetriamine is mainly used in the production of automobile seats and pillows, rigid polyether block foams.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse.

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

CAS 3855-32-1/2,6,10-Trimethyl-2,6,10-triazaundecane

CAS 3855-32-1/2,6,10-Trimethyl-2,6,10-triazaundecane

Overview:

Pentamethyldipropylenetriamine, also known as N,N,N’,N”,N”-pentamethyldipropylenetriamine, molecular formula is C11H27N3, molecular weight is 201.3522, CAS registry number is 3855-32-1, a kind of chemical intermediates.

Chinese name

Pentamethyldipropenyltriamine

English Name

2,6,10-Trimethyl-2,6,10-triazaundecane

Alias

N,N,N’,N”,N”-Pentamethyldipropenyltriamine

Chemical formula

C11H27N3

Molecular weight

201.3522

CAS No.

3855-32-1

EINECS number

223-362-3

Pentamethyldipropylenetriamine

3855-32-1

Bis(dimethylaminopropyl)methylamine

Polycat 77

Toyocat PMA

Jeffcat ZR-40

Lupragen N302

PC CAT NP50

Synonyms: N,N,N’,N”,N”-Pentamethyldipropylenetriamine, Pentamethyldipropylidenetriamine, Bis(dimethylaminopropyl)methanamine

English name: Pentamethyldipropylenetriamine

Molecular Formula: C11H27N3

Relative molecular mass: 201.4

CAS No.: 3855-32-1

Physical and chemical properties:

Pentamethyldipropylenetriamine Appearance is colorless to light yellow low viscosity liquid, fishy odor. Soluble in water, aqueous solution is strongly alkaline.

Viscosity(25℃,mPa.s):3

Density (25℃,g/cm3): 0.85

Water solubility: soluble in water

Flash point (PMCC,℃): 92

Hydroxyl value (mgKOH/g): 0

Characteristics and Uses:

Pentamethyldipropylenetriamine is a tertiary amine catalyst that can balance the influence on the reaction between urethane (polyol-isocyanate) and urea (isocyanate-water) in a variety of flexible and rigid polyurethane foams;

Pentamethyldipropylenetriamine improves the open-cell nature of flexible foams and reduces the brittleness and adhesion of rigid foams;

Pentamethyldipropylenetriamine is mainly used in the production of automobile seats and pillows, rigid polyether block foams.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse.

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

High Quality DMCHA / CAS 98-94-2 / N-Dimethylcyclohexylamine

High Quality DMCHA / CAS 98-94-2 / N-Dimethylcyclohexylamine

Overview:

Methylcyclohexanamine is Cyclohexanamine,2-methyl-, CAS number 98-94-2, molecular formula C7H15N, molecular weight 113.2, belongs to the pharmaceutical intermediates, the substance may be harmful to the environment, and special attention should be given to the water body.

Chinese name 2-methylcyclohexylamine

Foreign Name Cyclohexanamine,2-methyl-

CAS No. 98-

Molecular formula C7H15N

Molecular weight 113.2

Category Pharmaceutical intermediates

Chemical Name:N,N-Dimethylcyclohexylamine

Abbreviation: DMCHA

Alias: Polycat 5, Niax C-5, Jeffcat PMDETA, Lupragen N301, Tegoamin PMDETA, PC CAT PMDETA, Addocat PV, Toyocat DT, Polycat 5 catalyst, hard foam catalyst PC5

English name: N,N-dimethylcyclohexylamine

Chemical formula:C8H17N

Physicochemical properties:

N,N-dimethylcyclohexylamine is colorless to light yellow transparent liquid at room temperature, soluble in alcohol and ether solvents, insoluble in water. It is a strong alkaline tertiary amine compound.

Boiling range: 160-165°C

Freezing point: -60℃

Viscosity (25℃): 2mPa.s

Density (25℃): 0.85-0.87g/cm3

Refractive index (20℃): 1.4541-1.4550

Flash point (closed cup): 40-41℃.

Vapor explosion limit in air (volume fraction) small: 3.6%, large: 19.0%.

Method of Preparation:

There are various synthetic routes for N,N-dimethylcyclohexylamine, depending on the type of raw material there are cyclohexanone method, N,N-dimethylcyclohexylamine method, cyclohexylamine method, phenol method.

Uses:

The main use of N,N-dimethylcyclohexylamine is as a catalyst for rigid polyurethane foam, which is a low-viscosity, moderately active amine catalyst used in refrigerators, panels, spraying, and on-site infusion of polyurethane rigid foam. The catalyst catalyzes both gel and foam, providing a more balanced catalytic performance for the foam and gel reactions of rigid foams, it is a stronger catalyst for the reaction between water and isocyanate (foam reaction), and it also has moderate catalytic properties for the reaction of polyol plume isocyanate, and it is a strong initial catalyst for the foam reaction. It is a strong initial catalyst for the foam reaction. In addition to hard foam, it can also be used as an auxiliary foaming agent for molded soft foam and semi-hard foam. It has stable and adjustable performance in combination materials and can be stored for a long time.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

DMCHA/CAS 98-94-2/N-Dimethylcyclohexylamine

DMCHA/CAS 98-94-2/N-Dimethylcyclohexylamine

Overview:

Methylcyclohexanamine is Cyclohexanamine,2-methyl-, CAS number 98-94-2, molecular formula C7H15N, molecular weight 113.2, belongs to the pharmaceutical intermediates, the substance may be harmful to the environment, and special attention should be given to the water body.

Chinese name 2-methylcyclohexylamine

Foreign Name Cyclohexanamine,2-methyl-

CAS No. 98-

Molecular formula C7H15N

Molecular weight 113.2

Category Pharmaceutical intermediates

Chemical Name:N,N-Dimethylcyclohexylamine

Abbreviation: DMCHA

Alias: Polycat 5, Niax C-5, Jeffcat PMDETA, Lupragen N301, Tegoamin PMDETA, PC CAT PMDETA, Addocat PV, Toyocat DT, Polycat 5 catalyst, hard foam catalyst PC5

English name: N,N-dimethylcyclohexylamine

Chemical formula:C8H17N

Physicochemical properties:

N,N-dimethylcyclohexylamine is colorless to light yellow transparent liquid at room temperature, soluble in alcohol and ether solvents, insoluble in water. It is a strong alkaline tertiary amine compound.

Boiling range: 160-165°C

Freezing point: -60℃

Viscosity (25℃): 2mPa.s

Density (25℃): 0.85-0.87g/cm3

Refractive index (20℃): 1.4541-1.4550

Flash point (closed cup): 40-41℃.

Vapor explosion limit in air (volume fraction) small: 3.6%, large: 19.0%.

Method of Preparation:

There are various synthetic routes for N,N-dimethylcyclohexylamine, depending on the type of raw material there are cyclohexanone method, N,N-dimethylcyclohexylamine method, cyclohexylamine method, phenol method.

Uses:

The main use of N,N-dimethylcyclohexylamine is as a catalyst for rigid polyurethane foam, which is a low-viscosity, moderately active amine catalyst used in refrigerators, panels, spraying, and on-site infusion of polyurethane rigid foam. The catalyst catalyzes both gel and foam, providing a more balanced catalytic performance for the foam and gel reactions of rigid foams, it is a stronger catalyst for the reaction between water and isocyanate (foam reaction), and it also has moderate catalytic properties for the reaction of polyol plume isocyanate, and it is a strong initial catalyst for the foam reaction. It is a strong initial catalyst for the foam reaction. In addition to hard foam, it can also be used as an auxiliary foaming agent for molded soft foam and semi-hard foam. It has stable and adjustable performance in combination materials and can be stored for a long time.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

High Quality Pentamethyldiethylenetriamine / CAS 3030-47-5 / N,N,N’,N”,N”-Pentamethyldiethylenetriamine / PMDETA

High Quality Pentamethyldiethylenetriamine / CAS 3030-47-5 / N,N,N’,N”,N”-Pentamethyldiethylenetriamine / PMDETA

Overview:

Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a highly efficient catalyst for polyurethane soft foams and is used in the formulation of soft foam products, and can also be used as an auxiliary catalyst for hard foams to improve the fluidity of PU foams for large-capacity refrigerators.

Chinese name N,N,N,N,N-Pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Synonyms 1,1,4,7,7-Pentamethyldiethylenetriamine, Pentamethyldiethylenetriamine, CAS 3030-47-5, Polycat 5, Niax C-5, Jeffcat PMDETA, Lupragen N301, Tegoamin PMDETA, PC CAT PMDETA, Addocat PV, Toyocat DT, Polycat 5 Catalyst, Hard Foam Catalyst PC5

Chemical formula C9H23N3

Molecular weight 173.3

CAS No. 3030-47-5

Melting point -20℃

Boiling point 198℃

Water solubility Soluble in water, ether and alcohol solvents.

Appearance Colorless or yellowish transparent liquid

Flash Point 53℃

MDL No.: MFCD00014876

Refractive index: 1.442(lit.)

Physical properties of pentamethyldiethylenetriamine:

English name: N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Molecular formula: C9H23N3

Molecular weight: 173.3

Physical and Chemical Properties

Pentamethyldiethylenetriamine is colorless to light yellow clear liquid, easily soluble in water.

Purity: 98.0%.

Viscosity (25℃): 2mPa.s

Relative density (20℃): 0.8302-0.8306

Flash point (closed loop): about 72°C

Flash point (PMCC): 83.3°C

Boiling range: 196-201℃ or 70-80℃(1100Pa)

Vapor pressure (21℃): 0.29*133pa

Freezing point: <-20℃

Preparation method

Pentamethyldivinyltriamine is generally obtained by N-methylation of diethylenetriamine as raw material, and the methylation methods include formic acid/formaldehyde method and formaldehyde hydrogenation method.

Properties and uses:

Pentamethyldiethylenetriamine is a highly active and strong foaming polyurethane catalyst, which can also be used to balance the overall foaming and gel reaction. It is widely used in all kinds of polyurethane rigid foam, including polyisocyanuric acid sheet rigid foam, also can improve the foam fluidity, so it can improve the production process and product quality. Pentamethyldivinyltriamine can also be used alone as a catalyst in polyurethane foam formulations or in combination with other catalysts such as DNCHA. When used alone as a catalyst for rigid foam, the dosage range is 1.0-2.0 parts per 100 parts per mass of polyol. In addition to its use in rigid foam formulations, Pentamethyldiethylenetriamine can also be used in the production of polymeter-type polyurethane flexible block foams and molded foams.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

180KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com