Month: November 2023

delayed catalyst MP601/Dabco MP601 catalyst

delayed catalyst MP601/Dabco MP601 catalyst

Overview:

Product Name: Dabco MP601

Alias: Dabco MP601, Delayed Equilibrium Catalyst, Delayed Catalyst MP601, Dabco MP601 Catalyst, Delayed Tertiary Amine Catalyst, Highly Flexible Tertiary Amine Catalyst

Product Description: Dabco MP601

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):183.3

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 84

Hydroxyl value (mgKOH/g): 546

Brief introduction.

Dabco MP601 catalyst is a balanced tertiary amine with delayed polyurethane foaming developed for fast release polyurethane high resilience (HR) molded foam systems. Dabco MP601 catalyst provides an effective balanced reaction for complex parts with flowability, which can help customers reduce cycle times and increase productivity.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 1.09

Viscosity @25℃ mPa.s 183

Water solubility @25°C Fully soluble

Flash point, ℃ 84

Features.

Delayed polyurethane foaming time, fluidity, can be used in complex molding molds for high resilience sponges

Balanced polyurethane catalyst, wide process operating range

Reduced demolding time for increased productivity

Suitable for a wide range of TDI, T/M, M/T and MDI system polyurethane foams.

Recommendations for use.

Dabco MP601 Catalyst can be used to manufacture all types of polyurethane high resilience foam moldings.

Dabco MP601 Catalyst can be combined with other polyurethane catalyst products to achieve process performance.

Product Usage:

DABCO MP601 is a tertiary amine catalyst with both delayed and balanced properties developed for fast release high resilience (HR) molded foam systems;

DABCO MP601 provides an effective balance of reactivity with excellent flow and open-cell properties for rapid release systems to help customers reduce cycle time and increase productivity.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

delayed tertiary amine catalyst/high elasticity tertiary amine catalyst

delayed tertiary amine catalyst/high elasticity tertiary amine catalyst

Overview:

Product Name: Dabco MP601

Alias: Dabco MP601, Delayed Equilibrium Catalyst, Delayed Catalyst MP601, Dabco MP601 Catalyst, Delayed Tertiary Amine Catalyst, Highly Flexible Tertiary Amine Catalyst

Product Description: Dabco MP601

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):183.3

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 84

Hydroxyl value (mgKOH/g): 546

Brief introduction.

Dabco MP601 catalyst is a balanced tertiary amine with delayed polyurethane foaming developed for fast release polyurethane high resilience (HR) molded foam systems. Dabco MP601 catalyst provides an effective balanced reaction for complex parts with flowability, which can help customers reduce cycle times and increase productivity.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 1.09

Viscosity @25℃ mPa.s 183

Water solubility @25°C Fully soluble

Flash point, ℃ 84

Features.

Delayed polyurethane foaming time, fluidity, can be used in complex molding molds for high resilience sponges

Balanced polyurethane catalyst, wide process operating range

Reduced demolding time for increased productivity

Suitable for a wide range of TDI, T/M, M/T and MDI system polyurethane foams.

Recommendations for use.

Dabco MP601 Catalyst can be used to manufacture all types of polyurethane high resilience foam moldings.

Dabco MP601 Catalyst can be combined with other polyurethane catalyst products to achieve process performance.

Product Usage:

DABCO MP601 is a tertiary amine catalyst with both delayed and balanced properties developed for fast release high resilience (HR) molded foam systems;

DABCO MP601 provides an effective balance of reactivity with excellent flow and open-cell properties for rapid release systems to help customers reduce cycle time and increase productivity.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco PT302/low odor tertiary amine catalyst

Dabco PT302/low odor tertiary amine catalyst

Overview:

Product Name: Dabco PT302

Alias: Dabco PT302, low odor tertiary amine catalyst, low odor catalyst PT302, Dabco hard foam catalyst

Product Description: Dabco PT302

Product Physical Properties:

Appearance: light yellow liquid

Viscosity(25℃,mPa.s):90

Density (25℃,g/cm3): 0.99

Water solubility: soluble in water

Flash point (PMCC,℃): 98

Hydroxyl value (mgKOH/g): 470

CAS Dabco PT302 Main application Dabco PT302

Product Specification Dabco PT302 Brand Other

Executive standard Dabco PT302 Active substance content(%) Dabco PT302

Product Usage:

Dabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;

Dabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;

The dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;

Dabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

low odor catalyst PT302/Dabco hard foam catalyst

low odor catalyst PT302/Dabco hard foam catalyst

Overview:

Product Name: Dabco PT302

Alias: Dabco PT302, low odor tertiary amine catalyst, low odor catalyst PT302, Dabco hard foam catalyst

Product Description: Dabco PT302

Product Physical Properties:

Appearance: light yellow liquid

Viscosity(25℃,mPa.s):90

Density (25℃,g/cm3): 0.99

Water solubility: soluble in water

Flash point (PMCC,℃): 98

Hydroxyl value (mgKOH/g): 470

CAS Dabco PT302 Main application Dabco PT302

Product Specification Dabco PT302 Brand Other

Executive standard Dabco PT302 Active substance content(%) Dabco PT302

Product Usage:

Dabco PT302 is a high efficiency, low odor tertiary amine catalyst that accelerates the gelation reaction, primarily used in polyurethane rigid spray foams;

Dabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for foaming reactions, plus lower odor than Dabco 33-LV;

The dosage of Dabco PT302 can be adjusted according to the formulation, actual application and requirements;

Dabco PT302 can be used with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco PT304/polyurethane rigid foam catalyst PT304

Dabco PT304/polyurethane rigid foam catalyst PT304

Overview:

Product name: Dabco PT304

Alias: Dabco PT304, Polyurethane Rigid Foam Tripolymerization Catalyst PT304, Polyurethane Rigid Foam Catalyst PT304, Polyurethane Tripolymerization Catalyst PT304, Dabco Rigid Foam Tripolymerization Catalyst

Product Description: Tripolymerization catalyst for low odor polyurethane spray foam Dabco PT304

Product Physical Properties:

Appearance: light yellow liquid

Viscosity(25℃,mPa.s):500

Density (25℃,g/cm3): 0.995

Water solubility: slightly soluble in water

Flash point (PMCC,℃): 111

Hydroxyl value (mgKOH/g): 197

Typical Physical Properties Table.

Appearance Light yellow transparent liquid

Specific gravity 1.00

Viscosity@25℃ mPa.s 500

Water solubility 25°C slightly soluble

Flash Point, °C 111

Characteristics

Low odor trimerization catalyst

High activity to promote post-curing/curing

Improve bonding strength between foam and substrate

Recommendations for use.

Dabco PT304 Catalyst is recommended for use in spray foam formulations in conjunction with Dabco PT302 and Dabco PT303;

The amount of Dabco PT304 Catalyst can be adjusted according to the formulation, actual application and requirements.

Product Usage:

Dabco PT304 is a high activity, low odor amine polyurethane rigid foam trimerization catalyst that accelerates post-curing and also improves post-cure bond strength for a wide variety of rigid foam applications, especially for rigid spray foam.

The dosage of Dabco PT304 can be adjusted according to the formulation, actual application and requirements;

Dabco PT304 can be used in spray foam formulations in combination with Dabco PT302 and Dabco PT303.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

polyurethane tertiary amine catalyst/Dabco 2039 catalyst

polyurethane tertiary amine catalyst/Dabco 2039 catalyst

Overview:

Product Name: Dabco 2039

Alias: Dabco 2039, Catalyst 2039, Polyurethane tertiary amine catalyst, Dabco 2039 catalyst

Product Description: Dabco 2039

Product Physical Properties:

Appearance: light yellow liquid

Viscosity(25℃,mPa.s):180

Density (25℃,g/cm3): 1.01

Water solubility: soluble in water

Flash point (PMCC,℃): 95

Hydroxyl value (mgKOH/g): 415

Product Description: Dabco 2039 Catalyst for Polyester Flexible and Rigid Foam Systems

Description.

Dabco 2039 catalyst is a polyurethane tertiary amine catalyst primarily used to promote urethane (polyol-isocyanate) reactions with low VOC and low fogging. Dabco 2039 catalyst is a low-odor alternative to morpholine-based amine catalysts in polyester flexible block foam applications.Dabco 2039 catalyst is also used in all or high water rigid foam applications to reduce “chalking”, increase polyurethane foam flow, stabilize the structure of the foam cells and improve adhesion to various substrates. Typical Physical Properties

Typical Physical Properties Table.

Appearance Colorless transparent liquid

Specific gravity 1.01

Viscosity @25℃ mPa.s 180

Water solubility @25℃ soluble

Flash point, ℃ 95

Characteristics

Low odor alternative to morpholine catalysts

Strong gel urethane catalyst

Reaction selective

Improves bonding of substrates

Product Usage:

Dabco 2039 is a tertiary amine catalyst used to promote urethane (polyol – isocyanate) reactions as a replacement for morpholine amine catalysts in flexible polyester block foam applications;

Dabco 2039 is also used in all foam or high water content rigid foam applications to reduce product brittleness/improve product adhesion to various substrates.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco 2040/low odor amine catalyst

Dabco 2040/low odor amine catalyst

Overview:

Product Name: Dabco 2040

Alias: Dabco 2040, low odor amine catalyst, low odor catalyst, Dabco amine catalyst, soft foam catalyst Dabco

Product Description: Dabco 2040

Product Physical Properties:

Appearance: colorless liquid

Viscosity(25℃,mPa.s):8

Density (25℃,g/cm3): 1.05

Water solubility: soluble in water

Flash point (PMCC,℃): 107

Hydroxyl value (mgKOH/g): 543

Product Model:Dabco 2040 Place of Origin: Dabco 2040

Brand：Dabco 2040 Product Quantity：10000

Product Keywords：Dabco 2040

Industry：Fine Chemicals > Catalysts > Catalysts for Synthetic Materials

Product Series: Gas Products > Dabco Series

Product Usage:

Dabco 2040 is a low-odor amine catalyst used to enhance the curability of a wide range of flexible polyurethane foams and rigid polyurethane foams with high water content and their adhesion to substrates;

DABCO 2040 is typically used in applications where water is used as a co-blowing agent such as appliances, veneer panels, spray foams and box foams.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

low odor catalyst/Dabco amine catalyst

low odor catalyst/Dabco amine catalyst

Overview:

Product Name: Dabco 2040

Alias: Dabco 2040, low odor amine catalyst, low odor catalyst, Dabco amine catalyst, soft foam catalyst Dabco

Product Description: Dabco 2040

Product Physical Properties:

Appearance: colorless liquid

Viscosity(25℃,mPa.s):8

Density (25℃,g/cm3): 1.05

Water solubility: soluble in water

Flash point (PMCC,℃): 107

Hydroxyl value (mgKOH/g): 543

Product Model:Dabco 2040 Place of Origin: Dabco 2040

Brand：Dabco 2040 Product Quantity：10000

Product Keywords：Dabco 2040

Industry：Fine Chemicals > Catalysts > Catalysts for Synthetic Materials

Product Series: Gas Products > Dabco Series

Product Usage:

Dabco 2040 is a low-odor amine catalyst used to enhance the curability of a wide range of flexible polyurethane foams and rigid polyurethane foams with high water content and their adhesion to substrates;

DABCO 2040 is typically used in applications where water is used as a co-blowing agent such as appliances, veneer panels, spray foams and box foams.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco amine catalyst/soft foam catalyst Dabco

Dabco amine catalyst/soft foam catalyst Dabco

Overview:

Product Name: Dabco 2040

Alias: Dabco 2040, low odor amine catalyst, low odor catalyst, Dabco amine catalyst, soft foam catalyst Dabco

Product Description: Dabco 2040

Product Physical Properties:

Appearance: colorless liquid

Viscosity(25℃,mPa.s):8

Density (25℃,g/cm3): 1.05

Water solubility: soluble in water

Flash point (PMCC,℃): 107

Hydroxyl value (mgKOH/g): 543

Product Model:Dabco 2040 Place of Origin: Dabco 2040

Brand：Dabco 2040 Product Quantity：10000

Product Keywords：Dabco 2040

Industry：Fine Chemicals > Catalysts > Catalysts for Synthetic Materials

Product Series: Gas Products > Dabco Series

Product Usage:

Dabco 2040 is a low-odor amine catalyst used to enhance the curability of a wide range of flexible polyurethane foams and rigid polyurethane foams with high water content and their adhesion to substrates;

DABCO 2040 is typically used in applications where water is used as a co-blowing agent such as appliances, veneer panels, spray foams and box foams.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco MP601/delayed equilibrium catalyst

Dabco MP601/delayed equilibrium catalyst

Overview:

Product Name: Dabco MP601

Alias: Dabco MP601, Delayed Equilibrium Catalyst, Delayed Catalyst MP601, Dabco MP601 Catalyst, Delayed Tertiary Amine Catalyst, Highly Flexible Tertiary Amine Catalyst

Product Description: Dabco MP601

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):183.3

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 84

Hydroxyl value (mgKOH/g): 546

Brief introduction.

Dabco MP601 catalyst is a balanced tertiary amine with delayed polyurethane foaming developed for fast release polyurethane high resilience (HR) molded foam systems. Dabco MP601 catalyst provides an effective balanced reaction for complex parts with flowability, which can help customers reduce cycle times and increase productivity.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 1.09

Viscosity @25℃ mPa.s 183

Water solubility @25°C Fully soluble

Flash point, ℃ 84

Features.

Delayed polyurethane foaming time, fluidity, can be used in complex molding molds for high resilience sponges

Balanced polyurethane catalyst, wide process operating range

Reduced demolding time for increased productivity

Suitable for a wide range of TDI, T/M, M/T and MDI system polyurethane foams.

Recommendations for use.

Dabco MP601 Catalyst can be used to manufacture all types of polyurethane high resilience foam moldings.

Dabco MP601 Catalyst can be combined with other polyurethane catalyst products to achieve process performance.

Product Usage:

DABCO MP601 is a tertiary amine catalyst with both delayed and balanced properties developed for fast release high resilience (HR) molded foam systems;

DABCO MP601 provides an effective balance of reactivity with excellent flow and open-cell properties for rapid release systems to help customers reduce cycle time and increase productivity.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. Air Chemicals recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area, and that all storage containers be well sealed to avoid contact with water or other affected substances which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com