Product name |
Type |
Sealer |
Viscosity (mPa.s/25) |
Solid content (%) |
Solvent |
Application |
BI 7960 |
HDI Biuret |
DMP |
1100 |
70 |
PM |
Coil steel/electroplating coating |
BI 7961 |
HDI Biuret |
DMP |
2250 |
70 |
Naphta B |
Coil steel/electroplating coating |
BI 7963 |
HDI Biuret |
DEM |
4500 |
70 |
PM |
Low temperature curing or highly reactive coatings |
BI 7981 |
HDI trimer |
450 |
65 |
PMA |
Automotive/coil coating |
|
BI 7982 |
HDI trimer |
DMP |
600 |
70 |
PM |
Automotive/coil coating |
BI 7984 |
HDI trimer |
MEKO |
3000 |
75 |
Naphta B |
Coil/Industrial/Glass Coatings |
BI 7991 |
HDI Biuret |
DMP/DEM |
1000 |
70 |
PM |
Automotive/coil coating |
BI 7992 |
HDI trimer |
DMP/DEM |
1500 |
70 |
PM |
Automotive/coil coating |
DP9B/1353 |
HDI trimer |
DMP |
4000 |
75 |
Shellsol A/PMA |
Can/coil coating |
BI 7950 |
IPDI adduct |
DMP |
1200 |
65 |
PM |
Automotive/coil coating |
BI 7951 |
IPDI trimer |
DMP |
3500 |
65 |
Naphta B/BA |
Automotive/coil coating |
Covestro Desmodur N3580 BA (XP 2679) ultra-fast drying PU curing agent HDI base
Type |
aliphatic polyisocyanate (HDI Allophanate trimer) |
Form of Supply |
CombinationDesmophen® Grade configuration lightfast, wear-resistant polyurethane coating system |
Purpose |
about80% in butyl acetate |
Specifications
Features |
Value |
Measurement unit |
Method |
NCOcontent |
15.4±0.3 |
% |
M105-ISO11909 |
Features |
Value |
Measurement unit |
Method |
equivalent |
about273 |
||
Flashpoint |
31.5 |
°C |
DINENISO13736 |
Density@20°C |
about1.1 |
g/ml |
DIN51757 |
*This data is general information and is not part of the product manual.
Solubility/Dilution
Desmodur® N3580 BA can be diluted with esters, ketones, aromatic hydrocarbons, such as ethyl acetate, butyl acetate, propylene glycol methyl ether acetate, methyl isobutyl Ketones, cyclohexanone, toluene, xylene, naphtha and mixtures thereof. Generally good miscibility with listed solvents, but storage stability of prepared solutions must be tested. PU grade solvents (less than 0.05% water content) should be used. These solvents should not contain reactive groups like hydroxyl and amino groups. Aromatic hydrocarbons are not suitable as solvents. Polar and non-polar solutions with non-volatile content <65% are recommended as diluents. Desmodur® eco N7300 should not be diluted below 40% solids by weight. Prolonged storage of solvents with low binder content may result in turbidity and sedimentation.
Compatibility
Desmodur® N3580BA can usually be blended with the following products: aliphatic isocyanates such as Desmodur® N100, N75, N3200, N3390, N3400, N3600, N3800, XP 2410, Z4470 and some polyacrylates . However, the compatibility of ingredients in a formulation should always be tested.
Features/Applications
Desmodur® N3580 BA is used in combination with suitable Desmophen® products for the preparation of light, weather and scratch resistant two-component polyurethane coatings. The main fields of application are topcoats in automotive OEM and plastic coatings.
Save
– Store in original Covestro airtight container.
– Recommended storage temperature: 0-30°C.
– Protect from moisture, heat and foreign substances.
General Information: This product is moisture sensitive. Storage in high temperature environment will make the color of the product darker and the viscosity will increase.
Storage Time
When the product is stored in full compliance with the requirements of the above “storage” clause and handled properly, the product meets the requirements within 9 months from the date of shipment stated on the transport document Specifications or characteristic values described in the “Specification or characteristic values” clause above, as applicable. If the product exceeds the above-mentioned 9-month period, it does not mean that it no longer meets the set values in the specifications or characteristic values. However, it is recommended that products older than 9 months from the date of shipment be tested before use to confirm that they still comply with the values set forth in the specification or characteristic values. The manufacturer does not make any promises for products that have been shipped for more than 9 months from the date of shipment, and does not accept any responsibility and liability for non-conformity to specifications or set values in the characteristic values.
quantity. Prolonged storage of solvents with low binder content may result in turbidity and sedimentation.
Compatibility
Desmodur® N3580BA can usually be blended with the following products: aliphatic isocyanates such as Desmodur® N100, N75, N3200, N3390, N3400, N3600, N3800, XP 2410, Z4470 and some polyacrylates . However, the compatibility of ingredients in a formulation should always be tested.
Features/Applications
Desmodur® N3580 BA is used in combination with suitable Desmophen® products for the preparation of light, weather and scratch resistant two-component polyurethane coatings. The main fields of application are topcoats in automotive OEM and plastic coatings.
Save
– Store in original Covestro airtight container.
– Recommended storage temperature: 0-30°C.
– Protect from moisture, heat and foreign substances.
General Information: This product is moisture sensitive. Storage in high temperature environment will make the color of the product darker and the viscosity will increase.
Storage Time
When the product is stored in full compliance with the requirements of the above “storage” clause and handled properly, the product meets the requirements within 9 months from the date of shipment stated on the transport document Specifications or characteristic values described in the “Specification or characteristic values” clause above, as applicable. If the product exceeds the above-mentioned 9-month period, it does not mean that it no longer meets the set values in the specifications or characteristic values. However, it is recommended that products older than 9 months from the date of shipment be tested before use to confirm that they still comply with the values set forth in the specification or characteristic values. The manufacturer does not make any promises for products that have been shipped for more than 9 months from the date of shipment, and does not accept any responsibility and liability for non-conformity to specifications or set values in the characteristic values.
Kangrui original Rhodia Tolonate D2 HDI curing agent
Product Overview
Blocked aliphatic polyisocyanate (HDI homopolymer) supplied as a 75% solids solution in an aromatic solvent.
Product Specifications
(applicable to Pont-de-Claix, France and Freeport, Texas, USA products)
Chroma |
≤ 40 HAZEN |
Viscosity(25ºC) |
2500 ~4000 mPa.s |
NCO content (after unblocking) |
11.2 ±0.5% |
solid content |
75.0 ±2.0% |
FreeNCO |
< 0.05 % |
Physical properties
Appearance |
Transparent Liquid |
density@25℃ |
about 1060 kg/m3 |
Weight per US gallon |
about 8.85 pound |
Flashpoint(closed cup) |
about 49℃ |
Equivalent (based on form of delivery) |
about 370g |
Solubility
Soluble in esters, ketones, and aromatics. In most cases, a mixture of esters and aromatics is used.
Application
Tolonate® D2 is especially used as a cross-linking agent for hydroxyl polymers, Polyester and polyacrylic polyols in particular for the preparation of one-component heat-curing polyurethane weatherable coatings with excellent mechanical properties combined with outstanding solvent, abrasion and chemical resistance. Usually,
Tolonate D2 is used in automotive OEM paint formulations, can and coil coatings and some general industrial coatings for metals. Curing conditions are typically 20 to 40 minutes at 140-160°C (285-305°F), or 30 to 35 seconds at 320°C.
Packaging and Shipping
Packaging (please contact our salesperson)
Made in the United States: 215 kg net metal drum
Made in France: 860 kg net weight per pallet (215kg net weight 4 barrels)
Other packaging: available upon request
Transportation
Regulated, see Safety Data Sheet for details.
Storage conditions and shelf life
At room temperature, Tolonate® D2 is not affected by moisture.
Under proper storage conditions at a temperature below 40°C, two years of storage in the original airtight packaging will generally not have any effect on the product.
Flammability and Safety Guidelines
Please refer to the product safety data sheet before use.
Notice to users
The information in this article is based on our current knowledge and is provided in good faith . This is just a guideline, and the use of our products cannot damage or infringe third parties.
The manufacturer warrants that its products conform to its sales specifications. The information herein is not a substitute for the tests necessary to ensure that this product is suitable for a given purpose.
It is the user’s responsibility to ensure compliance with local regulations and to obtain the necessary certifications and authorizations.
Users should confirm that they are using the latest version of the current document, and the manufacturer reserves the right to supplement any additional information.
nbsp; At room temperature, Tolonate® D2 is not affected by moisture.
Under proper storage conditions at a temperature below 40°C, two years of storage in the original airtight packaging will generally not have any effect on the product.
Flammability and Safety Guidelines
Please refer to the product safety data sheet before use.
Notice to users
The information in this article is based on our current knowledge and is provided in good faith . This is just a guideline, and the use of our products cannot damage or infringe third parties.
The manufacturer warrants that its products conform to its sales specifications. The information herein is not a substitute for the tests necessary to ensure that this product is suitable for a given purpose.
It is the user’s responsibility to ensure compliance with local regulations and to obtain the necessary certifications and authorizations.
Users should confirm that they are using the latest version of the current document, and the manufacturer reserves the right to supplement any additional information.
Covestro Bayhydur VP LS 2336 Waterborne HDI Curing Agent
Type |
Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate |
Form of Supply |
Solvent free |
Purpose |
Curing agent for waterborne two-component polyurethane coating |
Product Specifications
style=”text-align:center”>density
Features |
Value |
Measurement unit |
Method |
|||
NCOcontent |
16.2±0.4 |
% |
DIN EN ISO 11 909 |
about1.16 |
g/cm3 |
DIN 51 757 |
Flashpoint |
about230 |
°C |
DIN EN 53 213 |
*The above values are general information.
Solubility/Dilution
Bayhydur® VP LS 2336Generally used with organic solvents such as: esters, ether esters, span> Xylene and solvent naphtha100Good compatibility. But in any case, the solubility of the prepared solution must be tested/Miscibility. Polyurethane grade solvents should be used(moisture content<0.05%).
Features/Applications
This product is a crosslinking agent for water-based paint. It is especially suitable for mixing by shaking or handAfter that, it can be used in civil fields that are ready to use. Even under pre-diluted conditions, the coating film is still transparent and bright. Grinding base material and curing agentThe mixing ratio is usually 10:1.
Save
This product is moisture sensitive and should be stored in the airtight original container. Stored under proper conditions, this product has a shelf life of at least 6months. But the viscosity will be slightlyImprove.
Safety: Hazard Identification
and skin Contact may cause sensitization. Product contains isocyanates. The safety data sheet should be read carefully (301721). It includes labelling, shipping and storageSave other relevant information, as well as relevant information on product use, product safety and ecology.
r:#464644″>Even under pre-diluted conditions, the coating film is still transparent and bright. Grinding base and curing agent The mixing ratio is usually10:1.
Save
This product is moisture sensitive and should be stored in the airtight original container. Stored under proper conditions, this product has a shelf life of at least 6months. But the viscosity will be slightlyImprove.
Safety: Hazard Identification
and skin Contact may cause sensitization. Product contains isocyanates. The safety data sheet should be read carefully (301721). It includes labelling, shipping and storageSave other relevant information, as well as relevant information on product use, product safety and ecology.
Covestro Desmodur VP LS 2394 TDI/HDI curing agent two-component application fast drying and light resistance
Type |
based on Toluene diisocyanate/Aromatic of hexamethylene diisocyanate/aliphatic polyisocyanate |
Form of Supply |
about 60%% butyl acetate |
Purpose |
with Various Desmophen® products or other suitable hydroxyl-containing compounds are used in combination to prepare transparent and Pigmented two-component polyurethane coating with fast drying and lightfastness |
Product Specifications
Features |
Value |
Measurement unit |
Method |
NCOcontent |
10.0-10.5 |
% |
DIN EN ISO 11 909 A. |
solid content |
r:#464644″>measurement unit |
Method |
|
Equivalent weight |
412 |
||
Flashpoint |
30 |
°C |
|
Density@20°C |
about 1.05 |
g/cm3 |
DIN 51 757 |
*This data is general information and is not part of the product manual.
Solubility/Dilution
In general, Desmodur® VP LS 2394 has good compatibility with the listed solvents. However, the stability of the resulting solution must always be tested. Desmodur® VP LS 2394 can be diluted with ethyl acetate, butyl acetate and 1-methoxypropyl acetate-2. Aromatics are not true solvents and therefore have only limited compatibility as diluents. Prolonged storage of solutions with low binder content may result in turbidity and precipitation. Use only PU grade solvents (<0.05% water content). Solvents must not contain reactive groups.
Compatibility
Desmodur® VP LS 2394 is compatible with many polyester based Desmophen® products, with limited compatibility with hydroxy-containing acrylates. In general, Desmodur® VP LS 2394 is compatible with Desmodur® products.
Features/Applications
Fast drying times are especially beneficial for clear and pigmented coats applied to wood.
Application of curtain coating process is also possible.
Save
– Store in original airtight Covestro container.
– Recommended storage temperature: > 0 – 30°C.
– Protects against moisture, heat and foreign objects.
General Information: This product is moisture sensitive. Storage at elevated temperatures will cause color and viscosity to increase.
Storage Time
Within six months after the date of shipment stated in the corresponding shipping document, the product will meet the specifications or values stated in the “Specification or characteristic data” section above, provided the product is stored, In full compliance with the storage conditions described and referenced in the “Storage” section above and otherwise handled properly. A failure within the six-month period does not necessarily mean that the product no longer meets specifications or setpoints. However, it is recommended that such products be tested before using them if they still meet the specifications or set values. No representations have been made with respect to the product after the six-month period and the manufacturer assumes no responsibility or liability for any failure of the product to meet specifications or settings after the six-month period.
; Storage time
Within six months after the date of shipment stated in the corresponding shipping document, the product will meet the specifications or values stated in the “Specification or characteristic data” section above, provided the product is stored, In full compliance with the storage conditions described and referenced in the “Storage” section above and otherwise handled properly. A failure within the six-month period does not necessarily mean that the product no longer meets specifications or setpoints. However, it is recommended that such products be tested before using them if they still meet the specifications or set values. No representations have been made with respect to the product after the six-month period and the manufacturer assumes no responsibility or liability for any failure of the product to meet specifications or settings after the six-month period.
Covestro Desmodur N3400 HDI dimer ultra-low viscosity high-solid low-viscosity formula uses anti-yellowing curing agent
Product Introduction
Aliphatic polyisocyanate (HDI uretdione);
Used as a curing agent component for weather-resistant polyurethane coating systems
Specifications
Features |
Value |
Measurement unit |
Method |
NCOcontent |
21.8 ± 0.7 |
% |
M105 -ISO 11909 |
Viscosity,23°C |
175 ± 75 |
mPa ·s |
M014 -ISO 3219/A.3 |
Color value(Hazen) |
≤ 80 |
M017 -EN1557 |
|
<spa°C |
about 1.14 |
g/ml |
DIN EN ISO 2811 |
*This data is general information and is not part of the product manual.
Features/Applications
Desmodur® N3400 is mainly used as a reactive diluent or curing agent for weather-resistant two-component polyurethane coatings, and as a resin for one-component moisture-curing polyurethane coatings. Desmodur® N3400 is usually mixed with other aliphatic polyisocyanates in two-component systems, such as Desmodur® N3200, ultra N3300, N3600 and Z4470. An ideal co-reactant is a hydroxyl polyacrylate. In one-component polyurethane systems, Desmodur® N3400 can be used as a single resin or mixed with other polyisocyanates, such as Desmodur® N3200 and ultra N3300. Due to its low viscosity, Desmodur® N3400 can also be used as a hardener in waterborne two-component polyurethane coatings.
Compatibility
Generally, Desmodur® N3400 can be mixed with the following products: aliphatic polyisocyanate such as Desmodur® N100, N75, N3200, ultra N3300, N3600 and Z4470; aromatic polyisocyanate such as Desmodur® L/ ultra L, HL and IL/ ultra IL; hydroxyl polyester such as Desmophen® 670; hydroxyl acrylate such as Desmophen® A series products. However, it is advisable to perform a compatibility test before each mixed use. Desmodur® N3400 is not very compatible with branched hydroxylated polyesters such as Desmophen® 651.
Solubility/Dilution
Desmodur® N3400 can be diluted by solvents such as esters, ketones and aromatic hydrocarbons, such as ethyl acetate, butyl acetate, propylene glycol methyl ether acetate, acetone, methyl ethyl ketone, methyl Isobutyl ketone, cyclohexanone, toluene, xylene, No. 100 mineral spirits and their mixtures. Generally, it has good compatibility with the various solvents listed, but the storage stability of its diluted solution still needs to be tested. Polyurethane grade solvents should be used (less than 0.05% water and should not contain reactive groups such as hydroxyl or amino groups in the solvent). Aliphatic hydrocarbons are not suitable as solvents.
Desmodur® N3400 cannot be diluted below 40% solids. Long-term storage of solutions with low resin content may cause turbidity and precipitation.
Save
– Store in original Covestro airtight container.
– Recommended storage temperature: 0-30°C.
– Protect from moisture, heat and foreign substances.
General Information: This product is sensitive to moisture. Storage at high temperature (greater than or equal to 30°C) will darken the color and increase the viscosity of the product.
Storage Time
Covestro declares that, provided that the product has been stored in full compliance with the requirements set out in the “Storage” clause above and has been properly handled, the product has been shipped from the date of shipment stated on the transport document Compliance with the specifications or characteristic values stated in the above clause “Specification or characteristic values” (as applicable) within 6 months. If the product exceeds the above-mentioned 6-month period, it does not mean that it no longer meets the set values in the specifications or characteristic values. However, Covestro recommends that products older than 6 months from the shipping date be tested before use to confirm that they still comply with the values set in the specifications or characteristic values. Covestro makes no promises and accepts no responsibility or liability for non-conformity to specifications or set values in characteristic values for products older than 6 months from the date of shipment.
Kang Rui (formerly Rhodia) Vencorex Tolonate™ HDT-LV2 low viscosity HDI trimer curing agent
Products Overview
Based on hexamethylene diisocyanate trimer (HDI homopolymer), Solvent free, very low viscosity. Supplied at 100% solids, it can be used to reduce VOC content in formulations.
Suggestions Purpose
Two-component high solids, low VOC polyurethane topcoat and clearcoat
Solvent-free and water-based polyurethane coating systems
Intermediate for synthesizing polyurethane resin
Products Specifications
Chroma |
≤40 HAZEN( APHA) |
Viscosity (25º C) |
600±150mPa· s |
NCO content(Supply State) |
23.0±1.0% |
HDI Free Monomer |
<0.5% |
Physics Performance
Appearance |
clear and transparent Liquid |
Solid content |
100% (about) |
Density (25º C) |
1131 kg/m3(about) |
Weight per US gallon |
9.43 pound |
Flash point (closed cup) |
>120℃ |
Equivalent (supply state) |
183 g(about) |
dissolve Sex
Soluble in esters, ketones and aromatic hydrocarbon solvents. In most cases, mixed solvents of esters and aromatic hydrocarbons are used. It is recommended to use “urethane grade” solvent (water content below 300ppm) for dilution.
Apply
（1）Similar to Tolonate™ HDT-LV, for Tolonate™ HDT-LV2 As a crosslinker for hydroxyl polymers, especially polyesters and polyacrylic polyols, to prepare two-component polyurethane coatings with excellent outdoor durability and mechanical properties, combined with outstanding solvent resistance, abrasion resistance and chemical resistance sex.
(2) Compared with standard trimer or biuret, due to Tolonate ™ HDT-LV2 has an extremely low viscosity and can be used in high solids coating systems, solvent-free coatings and two-component waterborne polyurethane coatings.
Packaging
Made in the United States: net weight 225 kg metal drum
Produced in France and Thailand: 900 kg net weight per pallet (225kg net weight 4 drums)
Other Packaging: Available upon request
Shipping
Not regulated, see Safety Data Sheet for details.
Storage Conditions and shelf life
Tolonate™ HDT-LV2 is moisture sensitive and should be stored in original packaging or dry under nitrogen In a protected container jar
Store in the original airtight package at a temperature of 25°C for nine months, usually no have any effect on the product.
yle=”font-size:18px”> Packaging
Made in the United States: net weight 225 kg metal drum
Produced in France and Thailand: 900 kg net weight per pallet (225kg net weight 4 drums)
Other Packaging: Available upon request
Shipping
Not regulated, see Safety Data Sheet for details.
Storage Conditions and shelf life
Tolonate™ HDT-LV2 is moisture sensitive and should be stored in original packaging or dry under nitrogen In a protected container jar
Store in the original airtight package at a temperature of 25°C for nine months, usually no have any effect on the product.
Kang Rui (formerly Rhodia) Vencorex Tolonate™ HDT-LV HDI trimer curing agent
Products Overview
Solvent-free, low viscosity aliphatic polyisocyanate trimer based on hexaethylene Methyl diisocyanate trimer (HDI homopolymer)
Suggestions Purpose
Two-component high solids polyurethane coatings and varnishes
Solvent-free polyurethane system
Original car paint, car refinish paint, industrial equipment, plastic parts… … and other exterior protective coatings
Polyurethane resin synthesis intermediate
Products Specifications
Chroma |
≤40 HAZEN (APHA) |
Viscosity( 25ºC) |
1200±300mPa·s |
NCO content (Supply Status) |
23.0±1.0% |
HDI free Monomer |
<0.2% |
Physics Nature
Appearance |
Clear liquid |
Solid content |
100% (approx.) |
Density (25ºC) |
1160 kg/m3 (approximately) |
per US Gallon Weight |
9.68 lbs |
Flashpoint (closed cup) |
>120℃ |
Equivalent ( Supply status) |
183 g (approx.) |
dissolve Sex
Soluble in esters, ketones and aromatic hydrocarbons. In most cases, a mixture of esters and aromatics is used. It is recommended to dilute with “urethane grade” solvent (water content below 300ppm)
Apply
Tolonate™ HDT-LV is especially used as a cross-linking agent for hydroxyl polymers, especially Polyester and polyacrylic polyols for the preparation of two-component polyurethane coatings or elastomers with excellent outdoor durability and mechanical properties, combined with outstanding solvent, abrasion and chemical resistance.
Due to the low viscosity characteristics of this product, and standard trimer or biuret In comparison, Tolonate HDT-LV can be used in high solids systems. Since it is not diluted with solvents, this product allows great freedom in formulation.
Packaging (please contact our sales staff)
Made in the United States: net weight 225 kg metal drum
Produced in France and Thailand: 900 kg net weight per pallet (225kg net weight 4 drums)
Other Packaging: Available upon request
Shipping
Not regulated, see Safety Data Sheet for details.
Storage Conditions and shelf life
Tolonate™ HDT-LV is moisture sensitive and should be stored in original packaging or dry under nitrogen In a protected container jar
In the original airtight packaging under proper storage conditions at a temperature below 40°C Storage for two years usually does not have any effect on the product.
Easy Flammability and Safety Guidelines
Please refer to the product safety data sheet before use
an style=”background-color:#f1c40f”> Flammability and Safety Guidelines
Please refer to the product safety data sheet before use
Lanxess Lanxess Trixene BI 7960 HDI biuret closed crosslinking agent
Product name |
Type |
Sealer |
Viscosity (mPa.s/25) |
Solid content (%) |
Solvent |
Application |
BI 7960 |
HDI Biuret |
DMP |
1100 |
70 |
PM |
Coil steel/electroplating coating |
BI 7961 |
HDI Biuret |
DMP |
2250 |
70 |
Naphta B |
Coil steel/electroplating coating |
BI 7963 |
HDI Biuret |
DEM |
4500 |
70 |
PM |
Low temperature curing or highly reactive coatings |
BI 7981 |
HDI trimer |
450 |
65 |
PMA |
Automotive/coil coating |
|
BI 7982 |
HDI trimer |
DMP |
600 |
70 |
PM |
Automotive/coil coating |
BI 7984 |
HDI trimer |
MEKO |
3000 |
75 |
Naphta B |
Coil/Industrial/Glass Coatings |
BI 7991 |
HDI Biuret |
DMP/DEM |
1000 |
70 |
PM |
Automotive/coil coating |
BI 7992 |
HDI trimer |
DMP/DEM |
1500 |
70 |
PM |
Automotive/coil coating |
DP9B/1353 |
HDI trimer |
DMP |
4000 |
75 |
Shellsol A/PMA |
Can/coil coating |
BI 7950 |
IPDI adduct |
DMP |
1200 |
65 |
PM |
Automotive/coil coating |
BI 7951 |
IPDI trimer |
DMP |
3500 |
65 |
Naphta B/BA |
Automotive/coil coating |
Lanxess Lanxess Trixene BI 7991 HDI biuret closed crosslinking agent
Product name |
Type |
Sealer |
Viscosity (mPa.s/25) |
Solid content (%) |
Solvent |
Application |
BI 7960 |
HDI Biuret |
DMP |
1100 |
70 |
PM |
Coil steel/electroplating coating |
BI 7961 |
HDI Biuret |
DMP |
2250 |
70 |
Naphta B |
Coil steel/electroplating coating |
BI 7963 |
HDI Biuret |
DEM |
4500 |
70 |
PM |
Low temperature curing or highly reactive coatings |
BI 7981 |
HDI trimer |
450 |
65 |
PMA |
Automotive/coil coating |
|
BI 7982 |
HDI trimer |
DMP |
600 |
70 |
PM |
Automotive/coil coating |
BI 7984 |
HDI trimer |
MEKO |
3000 |
75 |
Naphta B |
Coil/Industrial/Glass Coatings |
BI 7991 |
HDI Biuret |
DMP/DEM |
1000 |
70 |
PM |
Automotive/coil coating |
BI 7992 |
HDI trimer |
DMP/DEM |
1500 |
70 |
PM |
Automotive/coil coating |
DP9B/1353 |
HDI trimer |
DMP |
4000 |
75 |
Shellsol A/PMA |
Can/coil coating |
BI 7950 |
IPDI adduct |
DMP |
1200 |
65 |
PM |
Automotive/coil coating |
BI 7951 |
IPDI trimer |
DMP |
3500 |
65 |
Naphta B/BA |
Automotive/coil coating |