HDI trimer NPU HXR-90SB

HDI trimer NPU HXR-90SB

 

ABOUT:

constitute

Polyisocyanates modified with HDI-based isocyanate trimers

Supply Form

100% solids

use

Used as a non-yellowing curing agent for two-component coatings with good weathering resistan

Typical property indicators:

C-HXLV

Coronate-HXR

Coronate-HX

C-HK

appearances

Light yellow liquid

NCO content (%)

22.5-23.9

21.6-22.1

20.5-22.0

19.3-20.7

Solid content (%)

100

100

100

100

Viscosity 25°C (mm2/s)

800-1500

1700-3300

1300-3600

3620-14800

Color number (APHA NO.)

＜40

＜40

＜80

＜80

Free HDI content (wt%)

＜0.2

＜0.2

＜0.6

＜1.0

Specific gravity 20°C

1.17

1.17

1.16

1.17

Characteristics :

CORONATE HXR, HXLV, HX or HK are non-yellowingcuring agents for polyurethane coatings with better properties than diurethane condensate urethane adducts. CORONATE HXR, HXLV, HX or HK are widely used in motorcycle parts, automobile refinishing and wood coatings because of their good heat resistance and good compatibility with polyols and solvents.

 

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area withproper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possibleafter original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucousmembrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintaingood hygiene practices.

E_mail us : [email protected]

HDI Low Viscosity Covesro XP2840

HDI Low Viscosity Covesro XP2840

 

Characterization :

Aliphatic polyisocyanate based on hexamethylene diisocyanate.

As the hardener component for lightfast, weather-stable coating systems.

Form supplied :100 %

Characteristic data*

Property

Value

Unit of measurement

Method

NCO content

approx. 23.0

%

DIN EN ISO 11 909

Viscosity at 23 °C

approx. 500

mPa·s

DIN EN ISO 3219/A.3

Color value (Hazen)

< 80

DIN EN 1557

Monomeric HDI

 ≤ 0.26

%

DIN 55 956

*These values are provisional. Binding supply specifications will no be available until the final product data sheet is published.

Other data**：

Property

Value

Unit of measurement

Method

Viscosity at 25 °C

approx. 450

mPa·s

DIN EN ISO 3219/A.3

Equivalent weight

approx. 183

g

Flash point

183

°C

DIN EN 22 719

Density at 20 °C

1.15

g/cm3

DIN EN ISO 2811

**These values provide general information.

Solubility / thinnability ：

The product is compatible with the following solvents:

ethyl acetate, butyl acetate, 1-methoxypropylacetate-2, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene,solvent naphtha® 100 and mixtures thereof.

Aliphatic hydrocarbons are unsuitable as solvents.

Desmodur® XP 2840 should not be thinned to below a solids content of 40 % by weight. Prolonged storage of a solution with lower binder content may result in turbidity and sedimentation. Storage stability of the thinned product should be tested in each case.

 

Compatibility ：

Desmodur®XP 2840 can be blended with most Desmodur® grades, such as:Desmodur®N 75, N 100, N 3200, N 3300, N 3390, N 3400, N 3600, N 3900,Z 4470, HL and IL. Compatibility is generally good with hydroxyfunctional polyesters and polyethers (Desmophen®grades) as well as hydroxy acrylates.

It is incompatible with Desmophen® 650 and 651.

 

Properties / Applications ：

As a particularly low-viscosity polyisocyanate, Desmodur® XP 2840 is particularly well suited for the formulation of high-solids coatings for general industrial coating, automotive refinishing, transportation and plastics coating applications.

Storage：

– Storage in original sealed Covestro container.

– Recommended storage temperature: > 0 – 30 °C.

– Protect from moisture, heat and foreign material.

General information : The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity.

Storage time ：

Covestro represents that, for a period of nine months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section “specifications or characteristic data” above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section “storage” above and is otherwise handled appropriately.

The lapse of the nine months period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the nine months period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the nine months period.

E_mail us : [email protected]

HDI Low Viscosity Covesro XP2860

HDI Low Viscosity Covesro XP2860

 

Characterization : 

Aliphatic polyisocyanate based on hexamethylene diisocyanate.

As the hardener component for lightfast, weather-stable coating systems.

Form supplied:100 %

 

Characteristic data*:

Property

Value

Unit of measurement

Method

NCO content

approx. 20.0

%

M105-ISO 11909

Viscosity at 23 °C

approx. 500

mPa·s

M014-ISO 3219/A.3

Color value (Hazen)

≤ 80

M017-EN 1557

Monomeric HDI

≤ 0.16

%

M106-ISO 10283

*These values are provisional. Binding supply specifications will not be available until the final product data sheet is published.

Other data**:

Property

Value

Unit of measurement

Method

Viscosity at 25 °C

approx. 450

mPa·s

DIN EN ISO 3219/A.3

Equivalent weight

approx. 215

Flash point

193

°C

DIN EN 22 719

Density at 20 °C

1.106

g/cm3

DIN EN ISO 2811

**These values provide general information.

 

Solubility / thinnability :

The product is compatible with the following solvents: ethyl acetate,butyl acetate, 1-methoxypropylacetate-2, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, solvent naphtha®  100 and mixtures thereof.

Aliphatic hydrocarbons are unsuitable as solvents.

Desmodur®  XP 2860 should not be thinned to below a solids content of 40 % by weight. Prolonged storage of a solution with lowerbindercontent may result in turbidity and sedimentation. Storage stability of the thinned product should be tested in each case.

Compatibility :

Desmodur®  XP 2860 can be blended with most Desmodur® grades,such as: Desmodur® N 75, N 100, N 3200, N 3300, N 3390, N 3400, N 3600, N 3900, Z 4470, HL and IL. Compatibility is generally good with hydroxyfunctional polyesters and polyethers (Desmophen® grades) as well as hydroxy acrylates.

Properties / Applications :

As a particularly low-viscosity polyisocyanate, Desmodur®   XP  2860 is particularly well suited for the formulation of high-solids coatings for general industrial coating, automotive refinishing, transportation and plastics coating applications.

Storage :

– Storage in original sealed Covestro container.

– Recommended storage temperature: > 0 – 30 °C.

– Protect from moisture, heat and foreign material.

General information : The product is sensitive to moisture. Storag at higher temperatures will result in increase of color and viscosity.

Storage time :

Covestro represents that, for a period of nine months following the day of shipment as stated in the respective transport documents,the product will meet the specifications or values set forth in section “specifications or characteristic data” above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section “storage” above and is otherwise handled appropriately. The lapse of the nine months period does not necessarily mean that the product no longer meetsspecifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the nine months period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the nine months period.

Labeling and statutory requirements ：

This product data sheet is only valid in conjunction with the latestedition of the corresponding Safety Data Sheet. Any updating of safety-relevant information – in accordance with statutory requirements – will only be reflected in the Safety Data Sheet, copies of which will be revised and distributed. Information relating to the current classification and labeling, applications and processing methods and further data relevant to safety can be found in the currently valid Safety Data Sheet.

 

Further information :

The product is used mainly as a hardener in coating materials or adhesives. The handling of coating materials or adhesives containing reactive polyisocyanates and residual monomeric HDI requires appropriate protective measures referred to in the safety data sheet. These products may therefore be used only in industrial or trade applications. They are not suitable for use in homeworker (DIY) applications.

Important :

This is a Trial Product of which we do not yet have extensive experience. No guarantee can therefore be given regarding the behaviour of the product during processing or use.

E_mail us : [email protected]

HDI Low Viscosity Covesro XP2580

HDI Low Viscosity Covesro XP2580

 

Characterization :

Desmodur XP 2580 is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).

It is suitable for use as the hardener component for lightfast, weather-stable coating systems.

Form supplied :Form supplied is 100%.

Characteristic data:

Property

Value

Unit of measurement

Method

NCO content

19.5 ± 0.5 %

%

Viscosity at 25°C

450 ± 150

mPa∙s

Hazen color value

≤ 80

Monomeric HDI

≤ 0.14

 %

Other data*:

Property

Value

Unit of measurement

Viscosity at 23°C

approx. 500

mPa∙s

Equivalent weight

approx. 215

Flash point

193

°C

Density at 20°C

1.106

g/cm3

Solids

approx. 99.8

wt.-%

Weight per gallon

9.3

lb.

*These values provide general information and are not part of the product specification.

Solubility / thinnability:

The product is compatible with the following solvents: ethyl acetate, butyl acetate, 1-methoxypropylacetate-2, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, solvent naphtha 100 and mixtures thereof.

Aliphatic hydrocarbons are unsuitable as solvents.

Desmodur XP 2580 should not be thinned to below a solids content of 40% by weight. Prolonged storage of a solution with lower binder content may result in turbidity and sedimentation. Storage stability of the thinned product should be tested in each case.

 

Compatibility:

Desmodur XP 2580 can be blended with most Desmodur grades, such as: Desmodur® N 75, N 100, N 3200, N 3300, N 3390, N 3400, N 3600, Desmodur N 3900, Z 4470, HL and IL. Compatibility is generally good with hydroxyfunctional polyesters and polyethers (Desmophen® grades) as well as hydroxy acrylates.

 

Properties / Applications :

As a particularly low-viscosity polyisocyanate, Desmodur XP 2580 is

particularly well suited for the formulation of high-solids coatings for general industrial coating, automotive refinishing, transportation and plastics coating applications.

As with any product, use of Desmodur XP 2580 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

Handling information:

This product contains reactive HDI polyisocyanate/prepolymer and/or

monomeric HDI and should only be handled using appropriate protective

measures. Please review this product’s Safety Data Sheet for a summary of such protective measures. These products are suitable only for and should only be sold for use by industrial or trade (commercial) professionals. These products are not suitable for Do-It-Yourself applications.

Storage :

Desmodur XP 2580 should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Recommended storage temperature is 5º-30ºC.

 

Storage time:

Desmodur XP 2580 has a shelf life of six months from date of receipt at

customer, provided the material is stored in sealed original containers at the recommended storage temperature.

Other Information :

Desmodur® and Desmophen®are registered trademarks of Covestro.

 

Health and Safety Information:

Appropriate literature has been assembled which provides information

concerning the health and safety precautions that must be observed when

handling this product. Before working with this product, you must read

and become familiar with the available information on its risks, proper

use, and handling. This cannot be overemphasized. Information is available in several forms, e.g., safety data sheets and product labels. For further information contact your Covestro LLC representative or the Product Safety and Regulatory Affairs Department in Pittsburgh, PA.

E_mail us : [email protected]

HDI trimer BASF HI-100

HDI trimer BASF HI-100

ABOUT:

Product description     Basonat® HI 100 is an aliphatic isocyanurate for lightfast and weather-resistant 2K polyurethane coatings

Key benefits            • Solvent free

  • 100% isocyanurate oligomer

  • High weather resistance

  • Good light fastness

Chemical nature        Isocyanurate based on Hexamethylenediisocyanate (HDI)

Properties

Physical form

Transparent, viscous liquid

Technical data

(no supply specification)

NCO content

DIN EN ISO 11909

21.5 – 22.5%

NCO equivalent weight

~ 191

Viscosity at 23 °C (73 °F)

D = 1,000 s-1

DIN EN ISO 3219

2,500-4,000 mPa*s

Platin cobalt color number

(Hazen)

DIN EN ISO 6271

≤ 60

The NCO equivalent weight indicates the amount of Basonat® polyisocyanate as supplied containing 1 Mol of active NCO.

Application

Basonat® HI 100 is a solvent free isocyanurate oligomer.

Basonat® HI 100 allows a broad choice of solvents. For instance, when less volatile solvents would retard drying excessively, like in furniture coatings, highly volatile solvents can be chosen.

Basonat® HI grades are used to formulate particularly lightfast andweather-resistant coatings.

Basonat® HI polyisocyanates are used to crosslink most hydroxy group containing resins, e.g. acrylate resins like the Joncryl® Polyols and hydroxy polyesters like the hyperbranched Basonol HPE Polyesters. Sufficient compatibility withpolyester resins containing hydroxylgroups is not always given.

Formulation guidelines

Basonat® HI polyisocyanates can be diluted with esters (e.g. butyl acetate), ketones (e.g. methyl ethyl ketone), glycolether acetates (e.g. methoxypropylacetate) or with aromatic hydrocarbons (e.g. Solvesso®1 100, xylene).

If Basonat® HI polyisocyanates are diluted to a polyisocyanate fraction of less than 40%, turbidity, flocculation and/or sedimentation may occur during storage. Storage trials should always be carried out.

Results from long-term weathering tests show, that in most cases gloss retention is better with isocyanurates than with polyisocyanates based on biurets of hexamethylene diisocyanate (Basonat® HB grades). In addition, due to the low viscosity the solid content can be increased when Basonat® HI grades are used instead of Basonat® HB grades.

The theoretical equivalent amount of polyisocyanate required for crosslinking is computed using this formula:

0.075 x [OH value] x [non volatile fraction of OH component]

[NCO]

example: Joncryl® 507

OH value [mg KOH/g polyol on solids]

140

non-volatile fraction (nvf) [%]

80

Basonat® HI 100 , NCO content [%]

22

Dosage rate for 100 g Joncryl® 507 as supplied is 38.2 g of Basonat® HI 100.

Solvents, pigments or extenders etc. used, should be free from compounds containing active hydrogen groups, e.g. water, alcohols oramines.

A water content of less than 500 ppm in solvents and binders is recommended for 2K polyurethane lacquers.

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us : [email protected]

HDI trimer AsahiKasei  TKA-100

HDI trimer AsahiKasei  TKA-100

ABOUT:

Product Class: Isocyanate

DURANATE TKA-100 by Asahi Kasei is a hexamethylene diisocyanate (HDI) trimer. Acts as a curing agent for urethanes. Exhibits excellent color retention,weatherability and outstanding performance. Possible applications could be coatings for automotive, architectural, industrial, consumer electronic and information technology. Other applications of DURANATE TKA-100 may include gravure, offset and screen inks. Shows superior weatherability, good chemical & abrasion resistance, good compatibility and drying properties.

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us : [email protected]

HDI trimer  AsahiKasei  TPA-100

HDI trimer  AsahiKasei  TPA-100

ABOUT:

Product Class: Isocyanate

DURANATE TPA-100 by Asahi Kasei is a hexamethylene diisocyanate (HDI) trimer. It has high NCO content and low cosvisity. Acts as a curing agent for urethanes. Offers superior weatherability, good chemical & abrasion resistance, good compatibility and drying properties. Exhibits excellent color retention, weatherability and outstanding performance. Applications of DURANATE TPA-100 may include gravure, offset and screen inks. Possible applications could be coatings for automotive, architectural, industrial, consumer electronic and information technology.

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us : [email protected]

HDI trimer BASF HI-190

HDI trimer BASF HI-190

ABOUT:

Aliphatic polyisocyanate based on isocyanurate-modified hexamethylene diisocyanate (HDI). Exhibits excellent weather and chemical resistance, non-yellowing and physical properties. It is an approximately 90% solids solution in a 1:1 blend of n-butyl acetate and Solvesso 100. Can be diluted with esters, ketones, glycolether acetates or with aromatic hydrocarbons. Used to crosslink most hydroxy-containing resins and hydroxy functional polyesters. Recommended for

the formulation of lightfast and weather-resistant two-pack polyurethane coatings. Suitable for interior & exterior general industrial metal coating, plastic component coating, wood coatings for floor, furniture or millwork, and automotive OEM or refinish applications. It is listed with TSCA, EPCRA 311/312 and EPCRA 313.

Product Type

Polyurethanes (PU) > PU-Prepolymers > Isocyanates > HDI-based

Chemical Composition

Polyisocyanate based on isocyanurate-modified hexamethylene

diisocyanate (HDI)

Physical Form

Liquid

Appearance

Colorless to slightly yellow

Product Status

COMMERCIAL

Applications/ Recommended for

Coatings

Coatings Markets > Automotive OEM > Soft-feel interior

Coatings Markets > Automotive refinishing > Enamels > Two

components systems

Coatings Markets > General Industrial /Maintenance

Coatings Markets > Metals

Coatings Markets > Plastic coating

Coatings Markets > Wood & Furniture Coatings > Furniture/ interior

decoration

Labels/Agency Rating

TSCA,

EPCRA 311/312,

EPCRA 313

Properties：

Property

Value & Unit

Test Condition

Test Method

Isocyanate Content

19.3 – 20.3 %

Viscosity

450 – 650 cP

At 23°C

Color, APHA < 60

< 60

Solid Content

89 – 91 %

Shear Rate D

1000 s-1

Density

1.13 g/cm3

At 20°C

Isocyanate Equivalent

Weight

212

Melting Point

-25 °C

Boiling Point

160 °C

Flash Point

51.5 °C

DIN EN ISO 13736

Lower Explosion Limit

1.0 %

By Volume

Upper Explosion Limit

7.5 %

By Volume

Auto-ignition Temperature

430 °C

DIN 51794

Vapour Pressure

< 50 mbar

Viscosity

450 – 650 mPa-s

At 23°C

DIN 53019

Solubility

 Element

Test Condition

Test Method

Soluble in

Esters

Soluble in

Ketones

Soluble in

 Glycolether Acetates

Soluble in

Aromatic Hydrocarbons

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us : [email protected]

HDI trimer HT-100 WanHua

HDI trimer HT-100 WanHua

Application:

WANNATE® HT-100 is a solvent free aliphatic polyisocyanate based on

hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

Equivalent weight

approx. 193

Density at 25 ℃

approx. 1.16 g/ml

Flash point

approx. 158 ℃

WANNATE® HT-100 can be used as the hardener component for lightfast

two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties.

Preferred co-reactants are polyacrylates or polyester polyols.

The main applications for coatings based on WANNATE® HT-100 are

automotive OEM, automotive refinishing, transportation, industrial finishing and plastics.

Specification:

Properties

Specification

NCO Content

21.8 ±0.3%

Viscosity at 25 °C

2500 ±750 mPa·s

Color value (Hazen)

≤ 40

Monomeric HDI

≤ 0.20%

Package(s):

20 Kg Metal drum

220 Kg Metal drum

Storage / Solubility:

Storage in original container. Protect from moisture, heat and foreign material.

WANNATE® HT-100 is sensitive to moisture. Storage at higher temperatures will result in increasing of color and viscosity. Recommended storage temperature is -20 ~40 °C.

WANNATE® HT-100 can be thinned with esters, ketones and aromatic hydrocarbons such as ethyl acetate, butyl acetate, methoxypropylacetate, acetone,methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, solvent naphtha 100 and mixtures thereof. Generally speaking, it has good compatibility with the solvents listed. However, the solutions formed must be tested for their storage stability. Only PU grade solvents should be used (max.0.05%water, absence of reactive groups such as hydroxyl or amino groups). Aliphatic hydrocarbons are unsuitable as solvents.

WANNATE® HT-100 is not recommended to thin to a lower solid content.

Prolonged storage of a solution with a lower content may result in turbidity and sedimentation, even condensation.

Compatibility:

WANNATE® HT-100 can be mixed with the following products: aliphatic polyisocyanates, polyester polyols, aromatic polyisocyanates and polyacrylates.

Shelf Life:

It can be stored at least for 9 months at room temperature if stored properly.

 

Safety Hazards identification:

May cause sensitization by skin contact. Contains isocyanates. See information supplied by the manufacturer.

The product is used mainly as a hardener in coating materials or adhesives. The handling of coating materials or adhesives containing reactive polyisocyanates and residual monomeric HDI requires appropriate protective measures referred to in the safety data sheet.These products may therefore be used only in industrial or trade

applications. They are not suitable for use in homeworker (DIY) applications.

The safety data sheet should be observed. This contains information on labeling,transport and storage as well as on handing, productsafety and ecology.

Packaging:

Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances suchas moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us : [email protected]

Covestro Desmodur N3300 HDI trimer curing agent Standard light-resistant PU curing agent

Type Fat Family Polyisocyanate(HDItrimer)
Form of Supply None Solvent
Purpose in Used as a curing agent component in lightfast polyurethane coating systems

 

Product Specifications

Features Value Measurement unit Method
NCOcontent 21.8 ± 0.3 % DIN EN ISO 11909
00 mPa·s DIN EN ISO 3219/A.3
equivalent about 193
density,20°C about 1.16 g/ml DIN EN ISO 2811
Flashpoint about 158 °C DIN 22 719

*The values ​​above are general information and are not part of the product specification.

 

Solubility/ Dilution
Desmodur® N3300 can use esters, ketones, aromatic hydrocarbons Solvents such as: ethyl acetate, butyl acetate, propylene glycol methyl ether acetate, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, 100# solvent naphtha and their mixtures, etc. dilution. Generally, it has good miscibility with the above solvents. However, the storage stability of the prepared solution must be tested. Polyurethane grade solvents should be used (less than 0.05 % water, no reactive groups such as hydroxyl or amino groups). Aliphatic hydrocarbons are not suitable as solvents. Desmodur® N3300 should not be diluted below 40% solids. Solutions with low binder content may develop turbidity and precipitation after long-term storage.

 

compatibility
Desmodur® N3300 can generally be used with the following products. Namely: Desmodur® N100, N75, N3200, N3400, N3600 and Desmodur® Z4470 type aliphatic polyisocyanate; Desmodur® L, HL and IL type aromatic polyisocyanate; Desmophen® 670 type polyester polyol; Desmophen® A type polyisocyanate Acrylate. However, the compatibility of the prepared solutions must be tested. Desmodur® N3300 is not compatible with branched polyester polyols such as Desmophen® 651 or polyether polyols such as Desmophen® 1380 BT.

 

Features/Applications
Desmodur® N3300 is mainly used as a lightfast two-component polyurethane coating Curing agent, the prepared coating has strong chemical and weather resistance, excellent gloss retention and excellent mechanical properties. The best co-reactants are polyacrylates or polyester polyols The main areas of application for self-drying and force-drying coating systems based on Desmodur® N3300 are automotive original equipment (OEM), car refinishing, transport, industrial goods and plastics of finishing.

 

Save
Desmodur® N3300 is moisture sensitive and should therefore be stored in airtight in original container. When stored under proper conditions at room temperature, this product has a shelf life of at least 6 months.

 

Safety: Hazard Identification
May cause an allergic reaction by skin contact. The inclusion of isocyanates must strictly adhere to the safety data sheet. It includes relevant information such as labeling, transportation and storage, as well as relevant information on product use, product safety and ecology.

yle=”font-family:Arial,Helvetica,sans-serif”> Compatibility
Desmodur® N3300 can generally be used with the following products. Namely: Desmodur® N100, N75, N3200, N3400, N3600 and Desmodur® Z4470 type aliphatic polyisocyanate; Desmodur® L, HL and IL type aromatic polyisocyanate; Desmophen® 670 type polyester polyol; Desmophen® A type polyisocyanate Acrylate. However, the compatibility of the prepared solutions must be tested. Desmodur® N3300 is not compatible with branched polyester polyols such as Desmophen® 651 or polyether polyols such as Desmophen® 1380 BT.

 

Features/Applications
Desmodur® N3300 is mainly used as a lightfast two-component polyurethane coating Curing agent, the prepared coating has strong chemical and weather resistance, excellent gloss retention and excellent mechanical properties. The best co-reactants are polyacrylates or polyester polyols The main areas of application for self-drying and force-drying coating systems based on Desmodur® N3300 are automotive original equipment (OEM), car refinishing, transport, industrial goods and plastics of finishing.

 

Save
Desmodur® N3300 is moisture sensitive and should therefore be stored in airtight in original container. When stored under proper conditions at room temperature, this product has a shelf life of at least 6 months.

 

Safety: Hazard Identification
May cause an allergic reaction by skin contact. The inclusion of isocyanates must strictly adhere to the safety data sheet. It includes relevant information such as labeling, transportation and storage, as well as relevant information on product use, product safety and ecology.