High Quality BDMA / CAS 103-83-3 / Benzyldimethylamine / N,N-dimthylbenzylamine

High Quality BDMA / CAS 103-83-3 / Benzyldimethylamine / N,N-dimthylbenzylamine

Overview:

Name: Dimethylbenzylamine

Alias: BDMA, N-dimethylbenzylbenzylamine, dimethylbenzylamine, benzyldimethylamine, catalyst BDMA, hard foam catalyst BDMA, N-benzyldimethylamine, BDMA, CAS 103-83-3, Dabco BDMA, Jeffcat BDMA, Lupragen N103, PC CAT NP60

Molecular formula: C9H13N;

Relative molecular mass: 135.20;

CAS No.: 103-83-3;

Colorless to slightly yellow transparent liquid, soluble in ethanol, soluble in hot water, slightly soluble in cold water;

Purity ≥99%;

Moisture ≤0.5%;

Viscosity (25℃): 90mPa.s;

Density (25℃): 0.897g/cm3;

Freezing point: -75℃;

Boiling range: 178-184°C;

Refractive index (25℃): 1.5011;

Flash point (TCC): 54°C;

Vapor pressure (20℃): 200Pa

Physical and Chemical Properties

Appearance Colorless to light yellow liquid.

Solubility Slightly soluble in cold water, soluble in hot water, miscible in alcohol, ether.

Melting point -75 °C

Boiling point 183-184 °C765 mm Hg(lit.)

Density 0.9 g/mL at 25 °C(lit.)

Refractive index n20/D1.501(lit.)

Flash point 130 °F

Storage conditions Flammables area

Water solubility 8 g/L (20 ºC)

BRN 1099620

Uses:

BDMA in the polyurethane industry is a catalyst for polyester-type polyurethane block soft foam, polyurethane rigid foam, polyurethane sheet and adhesive coatings, mainly used in rigid foam, can make polyurethane foam with good pre-fluidity and homogeneous vesicles, the foam body and the substrate between the adhesion of a better;

BDMA is mainly used in the field of organic synthesis as catalyst for synthesizing dehydrohalogen in organic drugs, corrosion inhibitor, acid neutralizer, accelerator for electron microscope section embedding;

BDMA is also used in the synthesis of quaternary ammonium salts, the production of cationic surface-active powerful bactericides and so on;

BDMA in epoxy resin, mainly used to promote the curing system of acid anhydride, polyamide, fatty amine, etc., to accelerate the curing of the product, widely used in epoxy resin electronic potting materials, encapsulation materials, epoxy floor coatings, marine paints as a curing accelerator;

Specific application examples of BDMA are: carbon fiber/monomolecular epoxy resin-based composite laminates, electrophoretic coatings for epoxy substrates, and dry transformer potting compounds;

Alias:

Dimethylbenzylamine Benzyldimethylamine BDMA 103-83-3 Dabco BDMA Jeffcat BDMA Lupragen N103 PC CAT NP60

Storage:

Should be sealed and stored in dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

CAS 103-83-3/BDMA/Benzyldimethylamine

CAS 103-83-3/BDMA/Benzyldimethylamine

Overview:

Name: Dimethylbenzylamine

Alias: BDMA, N-dimethylbenzylbenzylamine, dimethylbenzylamine, benzyldimethylamine, catalyst BDMA, hard foam catalyst BDMA, N-benzyldimethylamine, BDMA, CAS 103-83-3, Dabco BDMA, Jeffcat BDMA, Lupragen N103, PC CAT NP60

Molecular formula: C9H13N;

Relative molecular mass: 135.20;

CAS No.: 103-83-3;

Colorless to slightly yellow transparent liquid, soluble in ethanol, soluble in hot water, slightly soluble in cold water;

Purity ≥99%;

Moisture ≤0.5%;

Viscosity (25℃): 90mPa.s;

Density (25℃): 0.897g/cm3;

Freezing point: -75℃;

Boiling range: 178-184°C;

Refractive index (25℃): 1.5011;

Flash point (TCC): 54°C;

Vapor pressure (20℃): 200Pa

Physical and Chemical Properties

Appearance Colorless to light yellow liquid.

Solubility Slightly soluble in cold water, soluble in hot water, miscible in alcohol, ether.

Melting point -75 °C

Boiling point 183-184 °C765 mm Hg(lit.)

Density 0.9 g/mL at 25 °C(lit.)

Refractive index n20/D1.501(lit.)

Flash point 130 °F

Storage conditions Flammables area

Water solubility 8 g/L (20 ºC)

BRN 1099620

Uses:

BDMA in the polyurethane industry is a catalyst for polyester-type polyurethane block soft foam, polyurethane rigid foam, polyurethane sheet and adhesive coatings, mainly used in rigid foam, can make polyurethane foam with good pre-fluidity and homogeneous vesicles, the foam body and the substrate between the adhesion of a better;

BDMA is mainly used in the field of organic synthesis as catalyst for synthesizing dehydrohalogen in organic drugs, corrosion inhibitor, acid neutralizer, accelerator for electron microscope section embedding;

BDMA is also used in the synthesis of quaternary ammonium salts, the production of cationic surface-active powerful bactericides and so on;

BDMA in epoxy resin, mainly used to promote the curing system of acid anhydride, polyamide, fatty amine, etc., to accelerate the curing of the product, widely used in epoxy resin electronic potting materials, encapsulation materials, epoxy floor coatings, marine paints as a curing accelerator;

Specific application examples of BDMA are: carbon fiber/monomolecular epoxy resin-based composite laminates, electrophoretic coatings for epoxy substrates, and dry transformer potting compounds;

Alias:

Dimethylbenzylamine Benzyldimethylamine BDMA 103-83-3 Dabco BDMA Jeffcat BDMA Lupragen N103 PC CAT NP60

Storage:

Should be sealed and stored in dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,

Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

Benzyldimethylamine/N,N-dimthylbenzylamine

Benzyldimethylamine/N,N-dimthylbenzylamine

Overview:

Name: Dimethylbenzylamine

Alias: BDMA, N-dimethylbenzylbenzylamine, dimethylbenzylamine, benzyldimethylamine, catalyst BDMA, hard foam catalyst BDMA, N-benzyldimethylamine, BDMA, CAS 103-83-3, Dabco BDMA, Jeffcat BDMA, Lupragen N103, PC CAT NP60

Molecular formula: C9H13N;

Relative molecular mass: 135.20;

CAS No.: 103-83-3;

Colorless to slightly yellow transparent liquid, soluble in ethanol, soluble in hot water, slightly soluble in cold water;

Purity ≥99%;

Moisture ≤0.5%;

Viscosity (25℃): 90mPa.s;

Density (25℃): 0.897g/cm3;

Freezing point: -75℃;

Boiling range: 178-184°C;

Refractive index (25℃): 1.5011;

Flash point (TCC): 54°C;

Vapor pressure (20℃): 200Pa

Physical and Chemical Properties

Appearance Colorless to light yellow liquid.

Solubility Slightly soluble in cold water, soluble in hot water, miscible in alcohol, ether.

Melting point -75 °C

Boiling point 183-184 °C765 mm Hg(lit.)

Density 0.9 g/mL at 25 °C(lit.)

Refractive index n20/D1.501(lit.)

Flash point 130 °F

Storage conditions Flammables area

Water solubility 8 g/L (20 ºC)

BRN 1099620

Uses:

BDMA in the polyurethane industry is a catalyst for polyester-type polyurethane block soft foam, polyurethane rigid foam, polyurethane sheet and adhesive coatings, mainly used in rigid foam, can make polyurethane foam with good pre-fluidity and homogeneous vesicles, the foam body and the substrate between the adhesion of a better;

BDMA is mainly used in the field of organic synthesis as catalyst for synthesizing dehydrohalogen in organic drugs, corrosion inhibitor, acid neutralizer, accelerator for electron microscope section embedding;

BDMA is also used in the synthesis of quaternary ammonium salts, the production of cationic surface-active powerful bactericides and so on;

BDMA in epoxy resin, mainly used to promote the curing system of acid anhydride, polyamide, fatty amine, etc., to accelerate the curing of the product, widely used in epoxy resin electronic potting materials, encapsulation materials, epoxy floor coatings, marine paints as a curing accelerator;

Specific application examples of BDMA are: carbon fiber/monomolecular epoxy resin-based composite laminates, electrophoretic coatings for epoxy substrates, and dry transformer potting compounds;

Alias:

Dimethylbenzylamine Benzyldimethylamine BDMA 103-83-3 Dabco BDMA Jeffcat BDMA Lupragen N103 PC CAT NP60

Storage:

Should be sealed and stored in dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,

Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

Methylcyclohexane CAS108-87-2

Methylcyclohexane CAS108-87-2

Cyclohxylmethane;

heptanaphthene;

methyl-cyclohexan;

methylecyclohexane;

Metylocykloheksan

 

RTECS No. GV6125000

Molecular Formula C7H14

CAS No. 108-87-2

EINECS No. 203-624-3

UN Dangerous Goods Code (UN No.): 2296

Shipping name: Methylcyclohexane

Hazardous classification ：3

Packing Group II

Customs code 2902 19 00

grade anhydrous
Quality Level 100
vapor density 3.4 (vs air)
vapor pressure 37 mmHg ( 20 °C)
83.2 mmHg ( 37.7 °C)
Assay ≥99%
form liquid
autoignition temp. 545 °F
impurities <0.002% water
<0.005% water (100 mL pkg)
evapn. residue <0.0005%
refractive index n20/D 1.422 (lit.)
bp 101 °C (lit.)
mp −126 °C (lit.)
density 0.77 g/mL at 25 °C (lit.)
SMILES string CC1CCCCC1
InChI 1S/C7H14/c1-7-5-3-2-4-6-7/h7H,2-6H2,1H3
InChI key UAEPNZWRGJTJPN-UHFFFAOYSA-N

 

 

Application

Methylcyclohexane may be used as a solvent for the synthesis of unsolvated n-butylmagnesium chloride by the reaction of 1-chlorobutane with magnesium powder. It may also be used as the starting material to synthesize 1-methylcyclohexanecarboxylic acid.

Pharmaceutical intermediates. Methylcyclohexane is an important organic solvent and extractant, which can be used as a solvent for rubber, paint, varnish (some paint solvents also use methylcyclohexane), and can be used as oil extractant. Methylcyclohexane can be used in organic synthesis as solvent and analytical reagent. In addition, methylcyclohexane can also be used as a standard for thermometer calibration. The correction solution is usually made of methylcyclohexane as the main component.

 

 

 

Description
Catalogue Number 806147
Description Methylcyclohexane

 

Product Information
CAS number 108-87-2
EC index number 601-018-00-7
EC number 203-624-3
Hill Formula C₇H₁₄
Chemical formula C₆H₁₁CH₃
Molar Mass 98.19 g/mol
HS Code 2902 19 00
Structure formula Image  
Quality Level MQ200

 

 

Physicochemical Information
Appearance Form:

 

 liquid
Color: colorless
Explosion limit 1.1 – 6.7 %(V)
Flash point -4 °C
Ignition temperature 260 °C
Melting Point -126.6 °C
Solubility 0.014 g/l
Initial boiling point and boiling range 101 °C 214 °F – lit.
Upper/lower flammability or explosive limits Upper explosion limit: 6.7 %(V) Lower explosion limit: 1.1 %(V)

 

Toxicological Information
LD 50 dermal LD50 Rabbit > 86000 mg/kg

 

Safety Information according to GHS
Hazard Pictogram(s)  
Hazard Statement(s) H225: Highly flammable liquid and vapour.
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statement(s) P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233: Keep container tightly closed.
P273: Avoid release to the environment.
P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P331: Do NOT induce vomiting.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
Signal Word Danger
RTECS GV6125000
Storage class 3 Flammable liquids
WGK WGK 2 obviously hazardous to water

 

Safety Information
Categories of danger highly flammable, irritant, harmful, dangerous for the environment

 

Storage and Shipping Information
Storage Store below +30°C.

 

Transport Information
Declaration (railroad and road) ADR, RID UN 2296 , 3, II
Declaration (transport by air) IATA-DGR UN 2296 , 3, II
Declaration (transport by sea) IMDG-Code UN 2296 , 3, II

 

Specifications
Assay (GC, area%) ≥ 99 %
Density (d 20 °C/ 4 °C) 0.769 – 0.770
Identity (IR) passes test

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

Package:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

N,N-Diisopropylethylamine CAS7087-68-5

N,N-Diisopropylethylamine CAS7087-68-5

 

N,N-Diisopropylethylamine

  • Ethyldiisopropylamine,

3-METHYL-1-BUTINE-3-OL;

BIOTECHGRADESOLVENT,99.5%;

DIPEA,

Ethyldiisopropylamine,

Hünig’s base

 

CAS Number:7087-68-5

EC Number:230-392-0

MDL number:MFCD00008868

 

 

Appearance Colorless to Light yellow clear liquid
Purity(GC) min. 99.0 %
Quality Level 200
Assay ≥99%
form liquid
refractive index n20/D 1.414 (lit.)
Melting Point -45 °C
Boiling Point 127 °C
density 0.742 g/mL at 25 °C (lit.)
Specific Gravity 0.92
Molecular Formula / Molecular Weight C8H19N = 129.25
Flash point 12 °C
Refractive Index 1.41
Solubility in water Insoluble
Solubility (soluble in) Alcohol
Condition to Avoid Air Sensitive
CAS 7087-68-5
MDL Number MFCD00008868
Explosion limit 0.7 – 6.3 %(V)
pH value 12.3 (H₂O, 20 °C) (as an emulsion)
Viscosity kinematic 0.88 mm2/s (20 °C)
Vapor pressure 14 hPa (20 °C)
HS Code 2921 19 99

 

General description

N,N-Diisopropylethylamine, also known as Hünig′s base, is a sterically hindered amine. It is a non-nucleophilic base commonly employed for substitution reactions.It acts as an activator for chiral iridium N, P ligand complexes, which can be utilized in the hydrogenation of α, β-unsaturated nitriles. The influence of varying concentration of N,N-diisopropylethylamine on the synthesis of olvanil in the presence of lipase catalyst has been investigated.

1 (13)

Application

N,N-Diisopropylethylamine may be used in the synthesis of mannosylated ovalbumin peptides.

TBDPS protection of Alcohols using tert-Butylchlorodiphenylsilane.

BOM protection of Alcohols using Benzyloxymethyl Chloride.

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

Package:

200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.

Email us: [email protected]

 

High Quality CAS 3164-85-0 / K-15 Catalyst / Potassium Isooctanoate

High Quality CAS 3164-85-0 / K-15 Catalyst / Potassium Isooctanoate

Overview:

Chinese name: potassium 2-ethylhexanoate

Alias: Catalyst K-15, Polyurethane Catalyst K-15, Tripolymerization Catalyst K-15, CAS 3164-85-0, Rigid Foam Tripolymerization Catalyst K-15, Rigid Foam Catalyst K-15

English name: potassium Octoate

Molecular Formula: C8H15O2K

Molecular Weight: 182.30

CAS No.: 3164-85-0

Product name: Potassium 2-ethylhexanoate, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt hydrate

Molecular structure: See Figure

Molecular formula: C8H15KO2

Molecular weight: 182.3

CAS No.: 3164-85-0

EINECS No.: 221-625-7

MDL No. MFCD00045896

Molecular weight 182.3

Physical and Chemical Properties:

Appearance: colorless liquid

Viscosity (25℃,mPa.s): 5400

Density (25℃,g/cm3): 1.13

Water solubility: soluble in water

Flash point (PMCC,℃): 138

Hydroxyl value (mgKOH/g): 271

Uses:

K-15 is solid in the normal state, usually dissolved and diluted with diethylene glycol to form a solution;

K-15 is suitable for use in high-viscosity polyol formulations to promote isocyanate reaction, high activity;

K-15 is widely used in spray hard foam, PIR hard foam and various other PU rigid foam.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

CAS 3164-85-0/K-15/K-15 Catalyst

CAS 3164-85-0/K-15/K-15 Catalyst

Overview:

Chinese name: potassium 2-ethylhexanoate

Alias: Catalyst K-15, Polyurethane Catalyst K-15, Tripolymerization Catalyst K-15, CAS 3164-85-0, Rigid Foam Tripolymerization Catalyst K-15, Rigid Foam Catalyst K-15

English name: potassium Octoate

Molecular Formula: C8H15O2K

Molecular Weight: 182.30

CAS No.: 3164-85-0

Product name: Potassium 2-ethylhexanoate, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt hydrate

Molecular structure: See Figure

Molecular formula: C8H15KO2

Molecular weight: 182.3

CAS No.: 3164-85-0

EINECS No.: 221-625-7

MDL No. MFCD00045896

Molecular weight 182.3

Physical and Chemical Properties:

Appearance: colorless liquid

Viscosity (25℃,mPa.s): 5400

Density (25℃,g/cm3): 1.13

Water solubility: soluble in water

Flash point (PMCC,℃): 138

Hydroxyl value (mgKOH/g): 271

Uses:

K-15 is solid in the normal state, usually dissolved and diluted with diethylene glycol to form a solution;

K-15 is suitable for use in high-viscosity polyol formulations to promote isocyanate reaction, high activity;

K-15 is widely used in spray hard foam, PIR hard foam and various other PU rigid foam.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

K-15 Catalyst/Potassium Isooctanoate

K-15 Catalyst/Potassium Isooctanoate

Overview:

Chinese name: potassium 2-ethylhexanoate

Alias: Catalyst K-15, Polyurethane Catalyst K-15, Tripolymerization Catalyst K-15, CAS 3164-85-0, Rigid Foam Tripolymerization Catalyst K-15, Rigid Foam Catalyst K-15

English name: potassium Octoate

Molecular Formula: C8H15O2K

Molecular Weight: 182.30

CAS No.: 3164-85-0

Product name: Potassium 2-ethylhexanoate, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt, 2-ethylhexanoic acid potassium salt hydrate

Molecular structure: See Figure

Molecular formula: C8H15KO2

Molecular weight: 182.3

CAS No.: 3164-85-0

EINECS No.: 221-625-7

MDL No. MFCD00045896

Molecular weight 182.3

Physical and Chemical Properties:

Appearance: colorless liquid

Viscosity (25℃,mPa.s): 5400

Density (25℃,g/cm3): 1.13

Water solubility: soluble in water

Flash point (PMCC,℃): 138

Hydroxyl value (mgKOH/g): 271

Uses:

K-15 is solid in the normal state, usually dissolved and diluted with diethylene glycol to form a solution;

K-15 is suitable for use in high-viscosity polyol formulations to promote isocyanate reaction, high activity;

K-15 is widely used in spray hard foam, PIR hard foam and various other PU rigid foam.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent moisture and other substances from mixing and affecting the performance of the product. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,

Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com

Main

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst Overview: Product Name: Dabco RP208 High Efficiency Reactive Balancing Catalyst Alias: Dabco RP208, high efficiency reactive equilibrium catalyst, reactive equilibrium catalyst, low odor reactive equilibrium catalyst, high resilience sponge reactive equilibrium catalyst Product Description: Dabco RP208 High Efficiency Reactive Equilibrium Catalyst is suitable for the production of low…

Reactive equilibrium catalyst/Low odor reaction type equilibrium catalyst

Reactive equilibrium catalyst/Low odor reaction type equilibrium catalyst

Overview:

Product Name: Dabco RP208 High Efficiency Reactive Balancing Catalyst

Alias: Dabco RP208, high efficiency reactive equilibrium catalyst, reactive equilibrium catalyst, low odor reactive equilibrium catalyst, high resilience sponge reactive equilibrium catalyst

Product Description: Dabco RP208 High Efficiency Reactive Equilibrium Catalyst is suitable for the production of low odor, low VOC soft sponges, and is recommended to be used in medium and high density ordinary sponges, high resilience and slow resilience sponges.

Availability: Yes Type: Others

Use: High resilience, slow resilience sponge Model: Dabco RP208

Specification: 25kg / barrel Trademark: Airborne Chemicals

Packing: Barrel Supplier: XinDian Chemical

Capacity: 2000

Introduction:

Brand: Air Chemical

Model: RP205

Product Name: Amine Catalyst

Main Ingredients: Catalyst

Use: Low VOC soft sponge

Useful life: slow rebound sponge

Use temperature：/℃

Specific surface area: /m2/kg

Heap density: /kg/m3

Water absorption: /%

Overall size: barrel

Packing specification: 25kg/drum

Role:

Odorless and high efficient reactive balanced catalyst for the production of low odor and low VOC soft sponges, suitable for medium and high density ordinary sponges, high resilience and slow resilience sponges.

Shelf life.

Keep unopened, two years

Storage and transportation:

Should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com