pentamethyldiethylenetriamine/PC-5 hard foam catalyst

pentamethyldiethylenetriamine/PC-5 hard foam catalyst

Overview:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reactions, which mainly catalyzes the foaming reaction, but is also used to balance the overall foaming and gelation reactions. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a highly efficient catalyst for polyurethane soft foams and is used in the formulation of soft foams, and also as a co-catalyst for hard foams to improve the fluidity of PU foams for large capacity refrigerators.

Alias: Pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, PC5

Chinese name N,N,N,N,N-Pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Alias 1,1,4,7,7-Pentamethyldiethylenetriamine

CAS No. 3030-47-5

Alias N,N,N′,N″,N″-Pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, catalyst AM-1, PMDETA, hard foam catalyst AM-1

Molecular weight C9H23N3

Chemical formula C9H23N3

Molecular weight 173.3

Melting point -20℃

Boiling point 198℃

Solubility Soluble in water, ether and alcohol solvents.

Appearance Colorless or yellowish transparent liquid

Flash Point 53℃

MDL No.: MFCD00014876

Refractive index: 1.442(lit.)

Basic Information:

Chemical name: N,N,N′,N′,N″-pentamethyldiethylenetriamine

Alias: Pentamethyldiethylenetriamine

Abbreviation: PMDETA

English name: N,N,N′,N′,N″-pentamethyldiethylenetriamine.

Molecular Formula: C9H23N3

Relative molecular mass 173.3

CAS No. 3030-47-5

Physicochemical properties:

Pentamethyldiethylenetriamine is colorless to light yellow clear liquid, easily soluble in water, product purity is generally 98.0%, its typical physical properties are: viscosity (25 ℃) 2mPa.s, relative density (20 ℃) 0.8302-0.8306, flash point (closed cup) 72 ℃ or so, flash point (PMCC) 83.3 ℃, boiling range of 196-201 ℃ or 70-80 ℃ (1100Pa ), vapor pressure (21℃) 0.29*133Pa, freezing point <-20℃. Explosion Limit:Lower Limit 1.1%,Upper Limit 5.6%. Refractive index 1.4435±0.0005,pH=11.0

Characteristics and Uses:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction, it catalyzes the foaming reaction mainly, and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Due to its strong foaming effect, it can improve the foam fluidity, so it improves the product production process and increases the production volume, and it is often used together with DMCHA and so on. Pentamethyldiethylenetriamine is used alone as a catalyst for polyurethane foam formulations or in combination with other catalysts. When used alone as a hard foam catalyst, the dosage range is 1.0-2.0 parts per 100 parts of polyol.

In addition to being used in rigid foam formulations, pentamethyldiethylenetriamine can also be used in the production of polyether-based polyurethane flexible block and molded foams. For example, 70% of pentamethyldiethylenetriamine is mainly used in the formulation of flexible foam products, the catalyst is active, the foaming speed is fast, and the products have high toughness as well as high load-bearing properties. In the soft foam every 100 parts of polyether the catalyst 0.1-0.5 parts can get better results. It can also be used as auxiliary catalyst for hard foam.

Pentamethyldiethylenetriamine quaternary ammonium salt is a delayed catalyst for soft foam, used to prolong the foam whitening time, suitable for complex shaped foam products and box-type foaming process, improve the structure of the bubble holes, and improve the quality of molding. Its own dosage range is quite wide, and the change of dosage has no obvious effect on the emulsion time; however, the increase of dosage can shorten the foam rising time, and can shorten the curing time.

Hazard statement

Hazard Code:T

Hazard class:22-24-34

Safety Class:26-36/37/39-45

UN Number:UN2734

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage:It is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original package to waterproof

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

PC5 catalyst/Polyurethane catalyst PC5

PC5 catalyst/Polyurethane catalyst PC5

Overview:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reactions, which mainly catalyzes the foaming reaction, but is also used to balance the overall foaming and gelation reactions. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a highly efficient catalyst for polyurethane soft foams and is used in the formulation of soft foams, and also as a co-catalyst for hard foams to improve the fluidity of PU foams for large capacity refrigerators.

Alias: Pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, PC5

Chinese name N,N,N,N,N-Pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Alias 1,1,4,7,7-Pentamethyldiethylenetriamine

CAS No. 3030-47-5

Alias N,N,N′,N″,N″-Pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, catalyst AM-1, PMDETA, hard foam catalyst AM-1

Molecular weight C9H23N3

Chemical formula C9H23N3

Molecular weight 173.3

Melting point -20℃

Boiling point 198℃

Solubility Soluble in water, ether and alcohol solvents.

Appearance Colorless or yellowish transparent liquid

Flash Point 53℃

MDL No.: MFCD00014876

Refractive index: 1.442(lit.)

Basic Information:

Chemical name: N,N,N′,N′,N″-pentamethyldiethylenetriamine

Alias: Pentamethyldiethylenetriamine

Abbreviation: PMDETA

English name: N,N,N′,N′,N″-pentamethyldiethylenetriamine.

Molecular Formula: C9H23N3

Relative molecular mass 173.3

CAS No. 3030-47-5

Physicochemical properties:

Pentamethyldiethylenetriamine is colorless to light yellow clear liquid, easily soluble in water, product purity is generally 98.0%, its typical physical properties are: viscosity (25 ℃) 2mPa.s, relative density (20 ℃) 0.8302-0.8306, flash point (closed cup) 72 ℃ or so, flash point (PMCC) 83.3 ℃, boiling range of 196-201 ℃ or 70-80 ℃ (1100Pa ), vapor pressure (21℃) 0.29*133Pa, freezing point <-20℃. Explosion Limit:Lower Limit 1.1%,Upper Limit 5.6%. Refractive index 1.4435±0.0005,pH=11.0

Characteristics and Uses:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction, it catalyzes the foaming reaction mainly, and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Due to its strong foaming effect, it can improve the foam fluidity, so it improves the product production process and increases the production volume, and it is often used together with DMCHA and so on. Pentamethyldiethylenetriamine is used alone as a catalyst for polyurethane foam formulations or in combination with other catalysts. When used alone as a hard foam catalyst, the dosage range is 1.0-2.0 parts per 100 parts of polyol.

In addition to being used in rigid foam formulations, pentamethyldiethylenetriamine can also be used in the production of polyether-based polyurethane flexible block and molded foams. For example, 70% of pentamethyldiethylenetriamine is mainly used in the formulation of flexible foam products, the catalyst is active, the foaming speed is fast, and the products have high toughness as well as high load-bearing properties. In the soft foam every 100 parts of polyether the catalyst 0.1-0.5 parts can get better results. It can also be used as auxiliary catalyst for hard foam.

Pentamethyldiethylenetriamine quaternary ammonium salt is a delayed catalyst for soft foam, used to prolong the foam whitening time, suitable for complex shaped foam products and box-type foaming process, improve the structure of the bubble holes, and improve the quality of molding. Its own dosage range is quite wide, and the change of dosage has no obvious effect on the emulsion time; however, the increase of dosage can shorten the foam rising time, and can shorten the curing time.

Hazard statement

Hazard Code:T

Hazard class:22-24-34

Safety Class:26-36/37/39-45

UN Number:UN2734

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage:It is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original package to waterproof

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

PC5 catalyst/Polyurethane catalyst PC5

PC5 catalyst/Polyurethane catalyst PC5

Overview:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reactions, which mainly catalyzes the foaming reaction, but is also used to balance the overall foaming and gelation reactions. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Pentamethyldiethylenetriamine is a chemical substance with the molecular formula C9H23N3. It is a highly efficient catalyst for polyurethane soft foams and is used in the formulation of soft foams, and also as a co-catalyst for hard foams to improve the fluidity of PU foams for large capacity refrigerators.

Alias: Pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, PC5

Chinese name N,N,N,N,N-Pentamethyldiethylenetriamine

English name N,N,N’,N”,N”-Pentamethyldiethylenetriamine

Alias 1,1,4,7,7-Pentamethyldiethylenetriamine

CAS No. 3030-47-5

Alias N,N,N′,N″,N″-Pentamethyldiethylenetriamine, hard foam catalyst PC-5, PC5 catalyst, catalyst AM-1, PMDETA, hard foam catalyst AM-1

Molecular weight C9H23N3

Chemical formula C9H23N3

Molecular weight 173.3

Melting point -20℃

Boiling point 198℃

Solubility Soluble in water, ether and alcohol solvents.

Appearance Colorless or yellowish transparent liquid

Flash Point 53℃

MDL No.: MFCD00014876

Refractive index: 1.442(lit.)

Basic Information:

Chemical name: N,N,N′,N′,N″-pentamethyldiethylenetriamine

Alias: Pentamethyldiethylenetriamine

Abbreviation: PMDETA

English name: N,N,N′,N′,N″-pentamethyldiethylenetriamine.

Molecular Formula: C9H23N3

Relative molecular mass 173.3

CAS No. 3030-47-5

Physicochemical properties:

Pentamethyldiethylenetriamine is colorless to light yellow clear liquid, easily soluble in water, product purity is generally 98.0%, its typical physical properties are: viscosity (25 ℃) 2mPa.s, relative density (20 ℃) 0.8302-0.8306, flash point (closed cup) 72 ℃ or so, flash point (PMCC) 83.3 ℃, boiling range of 196-201 ℃ or 70-80 ℃ (1100Pa ), vapor pressure (21℃) 0.29*133Pa, freezing point <-20℃. Explosion Limit:Lower Limit 1.1%,Upper Limit 5.6%. Refractive index 1.4435±0.0005,pH=11.0

Characteristics and Uses:

Pentamethyldiethylenetriamine is a highly active catalyst for polyurethane reaction, it catalyzes the foaming reaction mainly, and is also used to balance the overall foaming and gel reaction. It is widely used in various polyurethane rigid foams, including polyisocyanurate sheet rigid foams. Due to its strong foaming effect, it can improve the foam fluidity, so it improves the product production process and increases the production volume, and it is often used together with DMCHA and so on. Pentamethyldiethylenetriamine is used alone as a catalyst for polyurethane foam formulations or in combination with other catalysts. When used alone as a hard foam catalyst, the dosage range is 1.0-2.0 parts per 100 parts of polyol.

In addition to being used in rigid foam formulations, pentamethyldiethylenetriamine can also be used in the production of polyether-based polyurethane flexible block and molded foams. For example, 70% of pentamethyldiethylenetriamine is mainly used in the formulation of flexible foam products, the catalyst is active, the foaming speed is fast, and the products have high toughness as well as high load-bearing properties. In the soft foam every 100 parts of polyether the catalyst 0.1-0.5 parts can get better results. It can also be used as auxiliary catalyst for hard foam.

Pentamethyldiethylenetriamine quaternary ammonium salt is a delayed catalyst for soft foam, used to prolong the foam whitening time, suitable for complex shaped foam products and box-type foaming process, improve the structure of the bubble holes, and improve the quality of molding. Its own dosage range is quite wide, and the change of dosage has no obvious effect on the emulsion time; however, the increase of dosage can shorten the foam rising time, and can shorten the curing time.

Hazard statement

Hazard Code:T

Hazard class:22-24-34

Safety Class:26-36/37/39-45

UN Number:UN2734

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage:It is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original package to waterproof

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

TEMED/CAS 111-18-2/N,N,N’,N’-Tetramethyl-1,6-hexanediamine

TEMED/CAS 111-18-2/N,N,N’,N’-Tetramethyl-1,6-hexanediamine

Overview:

Tetramethylethylenediamine is a colorless transparent liquid with a slight odor of ammonia. Miscible with water, miscible with ethanol and most organic solvents.

Chinese name: Tetramethylethylenediamine, CAS 111-18-2, Dabco TMEDA, PC CAT TMEDA, Toyocat TE

English name: N,N,N’,N’-Tetramethylethylenediamine

Alias: Tetramethylethylenediamine

Chinese name: Tetramethylethylenediamine

N,N,N’,N’-Tetramethylethylenediamine

Alias: Tetramethylethylenediamine

Chemical formula (CH3)2NCH2CH2N(CH3)2

Molecular weight 116.21

Melting point -55℃

Boiling point 121~122℃

Density 0.775g/mL at 20°C

Flash Point 10℃

Basic Information:

Chemical formula: (CH3)2NCH2CH2N(CH3)2

Molecular weight: 116.21

Melting point: -55℃

Boiling Point: 121~122°C

Density: 0.775g/mL at 20℃

Flash Point: 10℃

Numbering system:

CAS No.: 110-18-9

MDL No.: MFCD00008335

EINECS No.: 203-744-6

RTECS No.: KV7175000

BRN No.: 1732991

PubChem No.: 24900591

FEMA Login No.: 2488

Physical properties:

1.Properties: colorless transparent liquid, slightly ammonia odor.

2.Melting point (℃): -55

  1. Boiling point (℃): 120~122

  2. Relative density (water=1): 0.77 (20℃)

  3. Relative vapor density (air=1): 4.0

  4. Octanol/water partition coefficient: 0.3

  5. Flash point (℃): 10

8.Ignition temperature (℃): 349

9.Explosion upper limit (%): 9.08

10.Lower explosion limit (%): 0.98

11.Solubility: miscible with water, miscible with ethanol and most organic solvents.

Molecular structure data:

  1. Molar refractive index: 37.28

2、Molar volume (cm3/mol): 142.0

3、Iso-tensile specific volume（90.2K）：322.2

4、Surface tension（dyne/cm）：26.4

5、Polarizability（10-24cm3）：14.78

Properties and stability:

  1. Stability Stable

  2. Prohibited substances Strong oxidizing agent, strong acid

  3. Avoid contact conditions Heat

  4. Hazards of polymerization Non-polymerization

  5. Decomposition products amine

Product Use:

Tetramethylethylenediamine is a moderately active foaming catalyst, foam/gel balanced catalyst, can be used in thermo-molding soft foam, polyurethane semi-rigid foam and rigid foam, promote skin formation, can be used as a co-catalyst for triethylene diamine (A33).

Tetramethylethylenediamine 110-18-9 Dabco TMEDA PC CAT TMEDA Toyocat TE

Storage:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

4-formylmorpholine/N-formylmorpholine

4-formylmorpholine/N-formylmorpholine

Overview:

N-formylmorpholine (NFM) is an important organic solvent and fine chemical raw material. It is colorless and transparent liquid at room temperature. It has the chemical property of amide, and its aqueous solution can be easily hydrolyzed into morpholine and formic acid under the condition of acid or alkali, and the aqueous solution is weakly alkaline.

N-formyl morpholine is an excellent extraction solvent for the production of aromatic hydrocarbons, and is widely used in synthetic fibers and other fields.

Basic information:

Chinese name: N-formylmorpholine

Synonyms: 4-Formylmorpholine; N-Formylmorpholine; 4-Morpholinecarboxaldehyde; N-Formylmorpholine; N-Formylmorpholine; N-Formylmorpholine; N-Formylmorpholine; N-formylmorpholine; 4-Formylmorpholine

Chinese name N-Formylmorpholine

N-Formylmorphol

Alias 4-Morpholinecarboxaldehyde

Molecular formula C5H9NO2

CAS: 4394-85-8

EINECS: 224-518-3

Molecular weight: 115.1305

Physical and chemical properties:

N-formylmorpholine Properties

Melting point: 20-23 °C(lit.)

Boiling point: 236-237 °C(lit.)

Density: 1.145 g/mL at 25 °C(lit.)

Vapor pressure: 0.03 hPa (20 °C)

Refractive index: n20/D 1.485(lit.)

Flash Point: >230 °F

Storage conditions: 2-8 °C

Solubility: SOLUBLE

Form: Liquid

Color: Clear yellow

PH value: 10 (250g/l, H2O, 20 °C)

Explosive limit value (explosive limit) 1.2-8.2%(V)

Water solubility: SOLUBLE

Sensitivity: Hygroscopic

BRN: 110293

CAS: Database 4394-85-8(CAS DataBase Reference)

NIST Chemical Substance Information: N-Formylmorpholine(4394-85-8)

EPA Chemical Substance Information 4-Morpholinecarboxaldehyde(4394-85-8)

Uses:

Used for desulfurization of natural gas, synthesis gas, flue gas, natural gas condensate and gasoline, etc.; it is the extraction solvent of petroleum aromatics device and can be used for recovery of aromatics by extractive distillation, which has good selectivity, thermal and chemical stability, non-toxicity and non-corrosion. It is a widely used solvent for recovering aromatics. It is an excellent non-protonic solvent with high solubility and selectivity for aromatics, and its mixtures have been successfully used in aromatics extraction process and butene thickening process.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

4-morpholine formaldehyde/CAS 4394-85-8

4-morpholine formaldehyde/CAS 4394-85-8

Overview:

N-formylmorpholine (NFM) is an important organic solvent and fine chemical raw material. It is colorless and transparent liquid at room temperature. It has the chemical property of amide, and its aqueous solution can be easily hydrolyzed into morpholine and formic acid under the condition of acid or alkali, and the aqueous solution is weakly alkaline.

N-formyl morpholine is an excellent extraction solvent for the production of aromatic hydrocarbons, and is widely used in synthetic fibers and other fields.

Basic information:

Chinese name: N-formylmorpholine

Synonyms: 4-Formylmorpholine; N-Formylmorpholine; 4-Morpholinecarboxaldehyde; N-Formylmorpholine; N-Formylmorpholine; N-Formylmorpholine; N-Formylmorpholine; N-formylmorpholine; 4-Formylmorpholine

Chinese name N-Formylmorpholine

N-Formylmorphol

Alias 4-Morpholinecarboxaldehyde

Molecular formula C5H9NO2

CAS: 4394-85-8

EINECS: 224-518-3

Molecular weight: 115.1305

Physical and chemical properties:

N-formylmorpholine Properties

Melting point: 20-23 °C(lit.)

Boiling point: 236-237 °C(lit.)

Density: 1.145 g/mL at 25 °C(lit.)

Vapor pressure: 0.03 hPa (20 °C)

Refractive index: n20/D 1.485(lit.)

Flash Point: >230 °F

Storage conditions: 2-8 °C

Solubility: SOLUBLE

Form: Liquid

Color: Clear yellow

PH value: 10 (250g/l, H2O, 20 °C)

Explosive limit value (explosive limit) 1.2-8.2%(V)

Water solubility: SOLUBLE

Sensitivity: Hygroscopic

BRN: 110293

CAS: Database 4394-85-8(CAS DataBase Reference)

NIST Chemical Substance Information: N-Formylmorpholine(4394-85-8)

EPA Chemical Substance Information 4-Morpholinecarboxaldehyde(4394-85-8)

Uses:

Used for desulfurization of natural gas, synthesis gas, flue gas, natural gas condensate and gasoline, etc.; it is the extraction solvent of petroleum aromatics device and can be used for recovery of aromatics by extractive distillation, which has good selectivity, thermal and chemical stability, non-toxicity and non-corrosion. It is a widely used solvent for recovering aromatics. It is an excellent non-protonic solvent with high solubility and selectivity for aromatics, and its mixtures have been successfully used in aromatics extraction process and butene thickening process.

Storage and transportation:

It should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

4-acetyl morpholine/CAS 1696-20-4/C6H11NO2

4-acetyl morpholine/CAS 1696-20-4/C6H11NO2

Overview:

4-Acetylmorpholine is an organic compound with the molecular formula C6H11NO2.

Chinese name: 4-Acetylmorpholine

English name: 4-Acetylmorpholine

Chemical formula: C6H11NO2

Molecular weight: 129

CAS No.: 1696-20-4

EINECS No.: 216-913-4

Chinese name: 4-Acetylmorpholine

Alias: N-Acetylmorpholine; 4-Acetylmorpholine

English name 4-Acetylmorpholine

Chemical formula C6H11NO2

Molecular weight 129

CAS No. 1696-20-4

EINECS No. 216-913-4

MDL No.: MFCD00006171

RTECS No.: QD7000000

Basic Information:

N-Acetylmorpholine CAS 1696-20-4

Chinese name: N-Acetylmorpholine

English name: 4-Acetylmorpholine

Molecular Formula: C6H11NO2

Molecular weight: 129.16

C A S：1696-20-4

Product Specification:

Appearance: colorless transparent liquid, no visible impurities

Content %: ≥99.0%.

Moisture %: ≤0.2%

Safety Information:

Customs code: 2934999090

WGK Germany: 1

Hazard Category Code: R36

Safety instructions: S26-S36-S39

RTECS number: QD7000000

Dangerous Goods Symbol: Xi

Properties:

It is colorless transparent liquid, non-toxic and non-corrosive. Melting point 10℃,Boiling point 246℃(0.101MPa),Specific gravity(20℃)1.116,Refractive index=1.4380.It can be miscible with water and low grade alcohols,and easily soluble in general organic solvents.N-Acetylmorpholine is chemically stable under general conditions,and its thermal decomposition temperature is more than 230℃. Under the action of heat and strong acid, it can undergo acidolytic reaction to produce morpholine salt and acetic acid.

Uses:

N-acetylmorpholine is a very important pesticide intermediate, is one of the main raw materials for the synthesis of agricultural fungicide enoymorpholine, flumorpholine.The mixture of N-acetylmorpholine and N-formylmorpholine is an excellent natural gas and syngas acid gas remover, used in the new Morphysorb process developed by foreign countries in recent years. The extraction of low quality natural gas or synthesis gas requires the removal of trace components such as CO2 and H2S, and the use of physical solvents is particularly advantageous for gases with high CO2 and H2S content.

[Packing]: Packed in 200KG plastic drum.

[Storage]: Store in a cool, ventilated place, away from fire and heat. Keep the container sealed. Prohibit the use of mechanical equipment and tools that are prone to sparks. Load and unload lightly when handling to prevent damage to the package and container.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

stannous octoate/DABCO T-9/Kosmos 29

stannous octoate/DABCO T-9/Kosmos 29

Overview:

Chinese name: Stannous octoate, organotin T-9

Alias: Stannous octoate, Stannous octoate, DABCO T-9, Kosmos 29, Addocat SO, Niax D-19, PC CAT T9, Borchi Kat 28, CAS 301-10-0, dabco t catalyst, dabco t urethane catalyst, stannous octoate D19, stannous octoate T- 9, Gel Catalyst T-9, Organotin T-9

Stannous octoate (stannous octoate) is a basic catalyst used in the production of polyurethane foam, room temperature curing silicone rubber, polyurethane rubber, and polyurethane coatings. It is chemically very unstable and highly susceptible to oxidation.

Chinese Name Stannous Octoate

English Name Stannous octoate

Chemical formula C16H30O4Sn

Molecular weight 405.1

CAS No. 301-10-0

Density 1.251

Main content of stannous 28+/-0.50%

Corrosivity: Non-corrosive

Basic information:

Chinese name: Stannous octoate

Alias: Stannous octoate, Stannous octoate, DABCO T-9, Kosmos 29, Addocat SO, Niax D-19, PC CAT T9, Borchi Kat 28, CAS 301-10-0, dabco t-catalyst, organotin T-9

Stannous octoate DABCO T-9 Kosmos 29 Organotin T-9 Niax D-19 PC CAT T9 Borchi Kat 28 CAS 301-10-0 dabco t catalyst dabco t polyurethane catalysts

English name: Stannous octoate

Molecular Formula: C16H30O4Sn

Molecular Weight: 405.10

CAS No.: 301-10-0

Density 1.251

Stannous main content: 28+/-0.50%

Main components: Content: (in stannous) about 22%, total tin about 23% emulsion.

Appearance and properties: white or yellow paste.

Relative density (water=1): 1.251

Flash point (℃): >110

Freezing point: -20℃

Viscosity(25℃):≤380MPa-s

Refractive index: 1.492

Solubility: insoluble in water, soluble in petroleum ether, polyol

Corrosiveness: non-corrosive

Toxicity: toxic, with strong neurotoxicity, air tolerance concentration 0.1mg/m3.

Other physical and chemical properties: 1.4933

Quality index:

Appearance [1] Light yellow transparent liquid or yellow-brown paste

Chromaticity (platinum-cobalt color number) ≤6

Mass fraction of total tin ≥28.0%

Stannous content ≥27.25

Foreign grades are Kosmos 29 (Germany), Nuocure (USA).

Uses:

Used in organic synthesis.

Stannous isooctanoate is a white or light yellowish brown paste, sometimes called stannous octanoate. It is soluble in petroleum ether and insoluble in water. It is a basic catalyst for the production of polyurethane foam, mainly used in the gelation reaction in the foaming of polyether-polyurethane, and can also be used as a polyurethane foam antioxidant. Used as catalyst for polyurethane synthesis and room temperature vulcanization of silicone rubber. Also used as catalyst type curing agent for epoxy resin. Stannous octanoate has greater catalytic activity than dibutyltin dilaurate in curing, and if the two are used in combination, the effect is better than that of using them individually, and it can take into account the speed of reaction and curing. Since dibutyltin compounds are easily oxidized and decomposed by oxygen and water vapor in the air, they should be used for nitrogen protection when stored, and must be sealed, avoiding high temperature and excessive humidity, in order to prevent the activity from decreasing or failing.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

semi-hard foam catalyst TMR-3/hard foam catalyst TMR-3

semi-hard foam catalyst TMR-3/hard foam catalyst TMR-3

Overview:

Product name: dabco tmr-3

Alias: polyurethane catalyst TMR-3, Dabco TMR-3, catalyst TMR-3, TMR-3, catalyst DABCO TMR, semi-rigid foam catalyst TMR-3, rigid foam catalyst TMR-3

Product Physical Properties:

Appearance: light yellow liquid

Viscosity(25℃,mpa.s):50

Density (25℃,g/cm3): 1.07

Water solubility: soluble in water

Flash point (pmcc,℃): >110

Hydroxyl value (mgkoh/g): 639

Product details

Polyurethane Catalyst TMR-3 Dabco TMR-3

Brand Dabco TMR-3

Operating temperature 3℃

Specific surface area 3m2/kg

Bulk density 3kg/m3

Water Absorption 3%

Appearance Light yellow liquid

Viscosity (25℃,mPa.s) 50

Density (25℃,g/cm3) 1.07

Water solubility Soluble in water

Flash point (PMCC,℃) >110

Hydroxyl value (mgKOH/g) 639

Usage:

dabco tmr-3 catalysts are used to promote polyisocyanurate reactions (trimerization) and provide uniform control of the initiation reaction compared to potassium catalysts;

dabco tmr-3 catalysts are used in rigid foam applications to provide improved flow.

NT CAT TMR-3 is a quaternary ammonium polyurethane catalyst.

NT CAT TMR-3 catalysts are used to promote polyisocyanurate reactions (trimerization) and provide uniform control of the initiation reaction compared to potassium catalysts;

NT CAT TMR-3 catalysts are used in rigid foam applications and provide improved flow compared to NT CAT TMR-2.

Storage and Transportation:

Should be kept tightly closed and stored in a dry, cool, ventilated warehouse

Packaging:

180KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

catalyst A33/polyurethane catalyst A33

catalyst A33/polyurethane catalyst A33

Overview:

Chinese name: polyurethane catalyst A33

Alias: Catalyst A33, Polyurethane Catalyst A33, Catalyst A33, Foaming Catalyst A33, CAS 280-57-9, Dabco 33-LV, Niax A-33, Jeffcat TD-33A, Lupragen N201, Tegoamin 33 PC CAT TD33, Addocat 105, TEDA L33, foaming catalyst, polyurethane foaming catalyst, catalyst A-33, polyurethane catalyst A-33, liquid catalyst, liquid complex amine catalyst

Polyurethane Catalyst A33 is a gel catalyst mainly used as polyurethane foam.

Synonyms A33 Polyurethane Catalyst A33, Catalyst A33, Dabco 33-LV, Niax A-33, Jeffcat TD-33A, Lupragen N201, Tegoamin 33, PC CAT TD33, Addocat 105, TEDA L33, Foaming Catalyst A33

Content 33% Triethylene diamine solution

Form Solid

Application Flexible, semi-rigid, rigid urethane foam

Chemical composition:

33% solution of triethylenediamine.

Triethylenediamine is solid at room temperature and is not convenient for use as a polyurethane catalyst. In industrial applications, it is often melted in small molecule diols and configured to be used as an alcohol solution with a mass fraction of 33% (or other concentrations).

Commonly used diols are dipropylene glycol monoacetate, propylene glycol, diethylene glycol monoacetate (diethylene glycol), ethylene glycol and so on.

Product Physical Properties:

Molecular formula: C6H12N2;

Relative molecular mass: 112.17;

CAS No.: 280-57-9;

Purity ≥99%;

Moisture ≤0.5%;

Viscosity (25℃): 100mPa.s;

Density (20℃): 1.033g/cm3;

Flash point (PMCC): 79℃;

Vapor pressure (38℃): 266Pa

Product Usage:

The active ingredient of polyurethane catalyst A33 is triethylene diamine, the solution prepared by 33% of triethylene diamine and 67% of monoconjugated dipropylene glycol is mainly used as gel catalyst for polyurethane foam, which is widely used in flexible, semi-rigid, rigid polyurethane foam, coating, elastomer, In polyurethane foaming system, isocyanate firstly reacts with triethylene diamine to generate active complex. The nature of the complex is very unstable, once the urethane bond is generated, it will be free, which is conducive to further catalyzing, triethylenediamine has a strong catalytic effect on the gel reaction and foaming reaction, especially on the polyurethane and hydroxyl catalytic effect is more selective.A33 is mainly used as gel catalyst for polyurethane foams, and it is widely used in flexible, semi-rigid, rigid polyurethane foams, elastomers, coatings, etc.

Polyurethane Catalyst A33 Catalyst A33 Foaming Catalyst A33 CAS 280-57-9 Dabco 33-LV Niax A-33 Jeffcat TD-33A Lupragen N201 Tegoamin 33 PC CAT TD33 Addocat 105 TEDA L33 Foaming Catalyst 33-LV Polyurethane Foaming Catalyst 33-LV Catalyst A-33 Polyurethane Catalyst A-33 Liquid Catalysts

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com