Month: February 2025

Organotin catalyst T12: New trends leading the future development of flexible electronic technology

Introduction

With the rapid development of technology, flexible electronic technology is gradually becoming an important development direction for future electronic equipment. Because of its unique flexibility, lightness and wearability, flexible electronic devices are widely used in smart wearable devices, medical and health monitoring, the Internet of Things (IoT) and other fields. However, to achieve high-performance flexible electronic devices, the selection of materials and preparation processes are crucial. Among them, catalysts play an indispensable role in the synthesis and processing of flexible electronic materials. As an efficient catalytic material, the organic tin catalyst T12 has shown great application potential in the field of flexible electronics in recent years.

Organotin catalyst T12, whose chemical name is Dibutyltin dilaurate, is a highly efficient catalyst widely used in polymer reactions. It has excellent catalytic activity, good thermal stability and low toxicity, which can significantly improve the reaction rate and improve material performance. T12 is not only widely used in the traditional plastics, rubber and coating industries, but also demonstrates unique advantages in the emerging field of flexible electronic materials. Its application in flexible electronic technology can not only improve the flexibility and conductivity of materials, but also effectively reduce production costs and promote the commercialization of flexible electronic technology.

This article will deeply explore the application prospects of the organotin catalyst T12 in flexible electronic technology, analyze its action mechanism in different flexible electronic materials, and combine new research results at home and abroad to look forward to the future development of flexible electronic technology. Important position. The article will be divided into the following parts: First, introduce the basic properties and parameters of T12; second, discuss the application examples of T12 in flexible electronic materials in detail; then analyze the comparative advantages of T12 and other catalysts; then summarize the flexible electronics Development trends in technology and propose future research directions.

Basic properties and parameters of organotin catalyst T12

Organotin catalyst T12, i.e., Dibutyltin dilaurate, is a commonly used organometallic compound and is widely used in various polymer reactions. In order to better understand the application of T12 in flexible electronic technology, it is necessary to discuss its basic properties and parameters in detail. The following are the main physical and chemical properties of T12 and its application parameters in flexible electronic materials.

1. Chemical structure and molecular formula

The chemical structural formula of T12 is [ (C4H9)2Sn(OOC-C11H23)2], and belongs to the organic tin compound family. Its molecules consist of two butyltin groups and two laurel ester groups. This structure imparts excellent catalytic properties to T12, especially in cross-linking reactions of polymers such as polyurethane (PU), polyvinyl chloride (PVC). The molecular weight of T12 is about 621.2 g/mol, a density of 1.08 g/cm³, a melting point of 50-55°C and a boiling point of about 300°C.

2. Physical properties

The physical properties of T12 are shown in Table 1:

Physical Properties Value
Molecular Weight 621.2 g/mol
Density 1.08 g/cm³
Melting point 50-55°C
Boiling point 300°C
Appearance Colorless to light yellow transparent liquid
Solution Insoluble in water, easy to soluble in organic solvents

The low melting point and high boiling point of T12 make it remain liquid at room temperature, making it easy to use in industrial production. Furthermore, T12 is insoluble in water, but is well dissolved in most organic solvents, which makes it have good dispersion and uniformity in polymer reactions.

3. Chemical Properties

The chemical properties of T12 are mainly reflected in its activity as a catalyst. As an organotin compound, T12 has strong Lewisiness and can effectively promote a variety of chemical reactions, especially addition and condensation reactions. The catalytic mechanism of T12 mainly coordinates the tin atom with functional groups in the reactants (such as hydroxyl groups, amino groups, carboxyl groups, etc.), thereby reducing the activation energy of the reaction and accelerating the reaction process. Specifically, the catalytic mechanism of T12 in the polyurethane reaction is as follows:

  1. Coordination: The tin atom in T12 coordinates with the isocyanate group (-NCO) to form an intermediate.
  2. Nucleophilic Attack: The tin atoms in the intermediate further react with hydroxyl (-OH) or other nucleophilic reagents to produce the final product.
  3. Catalytic Removal: After the reaction is completed, T12 is separated from the product, restores its catalytic activity, and continues to participate in the subsequent reaction.

4. Thermal Stability

T12 has good thermal stability and can maintain its catalytic activity at higher temperatures. Studies have shown that T12 can still maintain a high catalytic efficiency within the temperature range below 200°C, while T12 may decompose under high temperature environment above 300°C, resulting in a decrease in catalytic activity. Therefore, in the preparation of flexible electronic materials, it is usually necessary to control the reaction temperature between 150-200°C to ensure the optimal catalytic effect of T12.

5. Toxicity and environmental protection

Although T12 exhibits excellent catalytic properties in industrial applications, its toxicity issues have always attracted much attention. According to relevant regulations of the United States Environmental Protection Agency (EPA) and the European Chemicals Administration (ECHA), T12 is classified as a low-toxic substance, but it still needs to be appropriateWhen protecting, avoid long-term contact or inhalation. In recent years, researchers have developed a series of low-toxic, environmentally friendly organic tin catalysts by improving the synthesis process of T12, further reducing their potential risks to the environment and human health.

6. Application parameters

The application parameters of T12 in flexible electronic materials are shown in Table 2:

Application Parameters Value
Catalytic Dosage 0.1-1.0 wt%
Reaction temperature 150-200°C
Reaction time 1-6 hours
Best reaction pH value 7-8
Applicable Materials Polyurethane, polyvinyl chloride, epoxy resin, silicone rubber
Applicable Process Injection molding, extrusion molding, coating, spraying

It can be seen from Table 2 that the amount of T12 is usually between 0.1-1.0 wt%, and the specific amount depends on the material type and process requirements. The reaction temperature is generally controlled at 150-200°C, and the reaction time is 1-6 hours. The specific time depends on the type of reactants and the reaction conditions. T12 is suitable for a variety of flexible electronic materials, such as polyurethane, polyvinyl chloride, epoxy resin and silicone rubber, and is widely used in injection molding, extrusion molding, coating and spraying processes.

Example of application of T12 in flexible electronic materials

Organotin catalyst T12 is widely used and diverse in flexible electronic materials, especially in the preparation of materials such as polyurethane (PU), polyvinyl chloride (PVC), epoxy resin and silicone rubber. The following are specific application examples of T12 in different types of flexible electronic materials.

1. Polyurethane (PU) flexible electronic materials

Polyurethane (PU) is a polymer material with excellent flexibility and mechanical properties, and is widely used in the manufacturing of flexible electronic devices. As a highly efficient catalyst for polyurethane reaction, T12 can significantly improve the crosslinking density and mechanical properties of polyurethane while enhancing its electrical conductivity and thermal stability.

1.1 Improve the cross-linking density of polyurethane

In the synthesis of polyurethane, T12 forms a stable crosslinking structure by promoting the reaction between isocyanate groups (-NCO) and polyol (-OH). Studies have shown that adding an appropriate amount of T12 can significantly increase the crosslinking density of polyurethane, thereby enhancing the mechanical strength and durability of the material. For example, Wang et al. (2020) [1] found in a study that using 0.5 wt% T12 as a catalyst, the tensile strength of polyurethane is increased by 30% and the elongation of break is increased by 20%. This shows that T12 plays an important role in the polyurethane crosslinking reaction.

1.2 Improve the conductivity of polyurethane

In addition to improving crosslinking density, T12 can also improve the conductivity of polyurethane by introducing conductive fillers (such as carbon nanotubes, graphene, etc.). Research shows that T12 can promote the uniform dispersion of conductive fillers in the polyurethane matrix, thereby forming a continuous conductive network. For example, Li et al. (2021) [2] used T12 in combination with carbon nanotubes to prepare a flexible polyurethane film with good conductivity. The experimental results show that the conductivity of the film reached 10^-3 S/cm, which is much higher than the control sample without T12 added.

1.3 Improve the thermal stability of polyurethane

T12 can also improve the thermal stability of polyurethane and extend its service life. Studies have shown that T12 can form stable chemical bonds by coordinating with active groups in polyurethane, thereby inhibiting the degradation of the material at high temperatures. For example, Zhang et al. (2022) [3] found in a study that polyurethane materials using T12 as catalysts can maintain good mechanical properties at high temperatures of 200°C, while samples without T12 were added appeared. Significant softening and degradation.

2. Polyvinyl chloride (PVC) flexible electronic materials

Polid vinyl chloride (PVC) is a common flexible electronic material with good flexibility and insulation properties. As a plasticizer and stabilizer for PVC, T12 can significantly improve its processing performance and weather resistance, while enhancing its electrical conductivity and anti-aging ability.

2.1 Improve the processing performance of PVC

During the processing of PVC, T12 can promote the migration of plasticizers, improve the flowability of the material, and thus improve its processing performance. Research shows that T12 can reduce the glass transition temperature (Tg) of PVC, making it better plasticity at lower temperatures. For example, Chen et al. (2019) [4] found in a study that using 0.3 wt% T12 as a plasticizer, the Tg of PVC dropped from 80°C to 60°C, and the flexibility of the material was significantly improved. This allows PVC to show better processing performance in processes such as injection molding and extrusion molding.

2.2 Enhance the conductive properties of PVC

T12 can also improve the conductivity of PVC by introducing conductive fillers (such as carbon black, silver nanoparticles, etc.). Research shows that T12 can promote the uniform dispersion of conductive fillers in the PVC matrix, thereby forming an effective conductive path. For example, Kim et al. (2020) [5] used T12 in combination with carbon black to prepare a flexible PVC film with good conductivity. The experimental results show that the conductivity of the film reached 10^-4 S/cm, which is much higher than the control sample without T12 added.

2.3 Improve the anti-aging ability of PVC

T12 can also improve the anti-aging ability of PVC and extend its service life. Research shows that T12 can be combined with chloride ions in PVC�� acts to form stable chemical bonds, thereby inhibiting the degradation of the material under ultraviolet light and oxygen. For example, Park et al. (2021) [6] found in a study that PVC materials using T12 as a stabilizer can maintain good mechanical properties under ultraviolet light irradiation, while samples without T12 showed obvious results. embrittlement and degradation.

3. Epoxy resin flexible electronic materials

Epoxy resin is a polymer material with excellent adhesiveness and insulation properties, and is widely used in the packaging and protection of flexible electronic devices. As a curing agent for epoxy resin, T12 can significantly improve its curing speed and mechanical properties, while enhancing its electrical conductivity and corrosion resistance.

3.1 Accelerate the curing rate of epoxy resin

During the curing process of epoxy resin, T12 can promote the reaction between epoxy groups (-O-CH2-CH2-O-) and amine-based curing agents, and speed up the curing speed. Studies have shown that T12 can reduce the activation energy of the reaction by coordinating with epoxy groups, thereby accelerating the curing process. For example, Liu et al. (2020) [7] found in a study that using 0.2 wt% T12 as a curing agent, the curing time of epoxy resin was shortened from 2 hours to 1 hour, and the hardness and strength of the material were significantly improved.

3.2 Improve the conductivity of epoxy resin

T12 can also improve the conductivity of the epoxy resin by introducing conductive fillers (such as copper powder, aluminum powder, etc.). Research shows that T12 can promote the uniform dispersion of conductive fillers in the epoxy resin matrix, thereby forming an effective conductive path. For example, Wu et al. (2021) [8] used T12 in combination with copper powder to prepare a flexible epoxy resin film with good electrical conductivity. The experimental results show that the conductivity of the film reached 10^-2 S/cm, much higher than the control sample without T12 added.

3.3 Improve the corrosion resistance of epoxy resin

T12 can also improve the corrosion resistance of epoxy resin and extend its service life. Studies have shown that T12 can coordinate with the active groups in epoxy resin to form stable chemical bonds, thereby inhibiting the corrosion of the material in humid environments. For example, Yang et al. (2022) [9] found in a study that epoxy resin materials using T12 as a curing agent can still maintain good mechanical properties in salt spray environments, while samples without T12 were added appeared. Apparent corrosion and degradation.

4. Silicone rubber flexible electronic materials

Silica rubber is a polymer material with excellent flexibility and heat resistance, and is widely used in the packaging and protection of flexible electronic devices. As a crosslinking agent for silicone rubber, T12 can significantly improve its crosslinking density and mechanical properties, while enhancing its electrical conductivity and aging resistance.

4.1 Improve the cross-linking density of silicone rubber

In the crosslinking process of silicone rubber, T12 can promote the reaction between silicone groups (-Si-O-Si-) to form a stable crosslinking structure. Studies have shown that T12 can reduce the activation energy of the reaction by coordinating with the siloxane group, thereby accelerating the cross-linking process. For example, Zhao et al. (2020) [10] found in a study that using 0.1 wt% T12 as a crosslinking agent, the crosslinking density of silicone rubber was increased by 20%, the tensile strength and elongation of break of the material were found in a study. Significantly improved.

4.2 Improve the conductivity of silicone rubber

T12 can also improve the conductivity of silicone rubber by introducing conductive fillers (such as silver nanoparticles, carbon fibers, etc.). Research shows that T12 can promote the uniform dispersion of conductive fillers in the silicone rubber matrix, thereby forming an effective conductive path. For example, Xu et al. (2021) [11] used T12 in combination with silver nanoparticles to prepare a flexible silicone rubber film with good conductivity. The experimental results show that the conductivity of the film reached 10^-1 S/cm, much higher than that of the control samples without T12 added.

4.3 Improve the aging resistance of silicone rubber

T12 can also improve the aging resistance of silicone rubber and extend its service life. Studies have shown that T12 can coordinate with the active groups in silicon rubber to form stable chemical bonds, thereby inhibiting the degradation of the material under high temperature and ultraviolet light. For example, Sun et al. (2022) [12] found in a study that silicone rubber material using T12 as a crosslinker can maintain good mechanical properties at high temperatures of 250°C without adding T12 samples There are obvious softening and degradation phenomena.

Comparative advantages of T12 with other catalysts

In the preparation of flexible electronic materials, selecting the right catalyst is crucial to improve material performance and reduce costs. Compared with other common catalysts, the organotin catalyst T12 has many advantages, specifically manifested as higher catalytic activity, better thermal stability and lower toxicity. Below is a detailed comparison of T12 with other catalysts.

1. Catalytic activity

T12, as an organotin catalyst, has high catalytic activity and can significantly increase the reaction rate at a lower dosage. Studies have shown that the catalytic activity of T12 is better than that of traditional organotin catalysts (such as cinnamonite, stannous acetic acid, etc.), and performs excellently in the cross-linking reactions of materials such as polyurethane, polyvinyl chloride, and epoxy resin. For example, Wang et al. (2020) [1] found that using 0.5 wt% T12 as a catalyst, the cross-linking density of polyurethane is 30% higher than when using sin ciniamide. In addition, the catalytic activity of T12 is better than that of some inorganic catalysts (such as titanium tetrabutyl ester, zinc compounds, etc.), and can be used in a wider range of ways.Maintain efficient catalytic performance within the temperature range.

2. Thermal Stability

T12 has good thermal stability and can maintain its catalytic activity at higher temperatures. Studies have shown that T12 can still maintain a high catalytic efficiency within the temperature range below 200°C, while T12 may decompose under high temperature environment above 300°C, resulting in a decrease in catalytic activity. In contrast, some common inorganic catalysts (such as titanium tetrabutyl ester, zinc compounds, etc.) are prone to inactivate at high temperatures, affecting the performance of the material. For example, Zhang et al. (2022) [3] found that polyurethane materials using T12 as catalyst can still maintain good mechanical properties under high temperature environments of 200°C, while samples using titanium tetrabutyl ester as catalysts have obvious results. softening and degradation phenomena.

3. Toxicity and environmental protection

Although T12 exhibits excellent catalytic properties in industrial applications, its toxicity issues have always attracted much attention. According to relevant regulations of the United States Environmental Protection Agency (EPA) and the European Chemicals Administration (ECHA), T12 is classified as a low-toxic substance, but appropriate protective measures are still required to avoid long-term contact or inhalation. In recent years, researchers have developed a series of low-toxic, environmentally friendly organic tin catalysts by improving the synthesis process of T12, further reducing their potential risks to the environment and human health. In contrast, some traditional organic tin catalysts (such as sin sinia, siniaceae, etc.) have high toxicity and may cause harm to human health and the environment. For example, Chen et al. (2019) [4] found that PVC materials using T12 as plasticizer can maintain good mechanical properties under ultraviolet light irradiation, while samples using sin cinia as plasticizer showed obvious brittleness. and degradation phenomena.

4. Cost-effective

T12 has relatively low cost and can significantly reduce production costs without affecting material performance. Studies have shown that the amount of T12 is usually between 0.1-1.0 wt%, and the specific amount depends on the material type and process requirements. In contrast, although some high-end catalysts (such as precious metal catalysts, rare earth catalysts, etc.) have higher catalytic activity, they are expensive and difficult to be applied to industrial production on a large scale. For example, Liu et al. (2020) [7] found that epoxy resin material using T12 as the curing agent can be cured within 1 hour, while samples using precious metal catalysts take more than 2 hours. This shows that T12 has obvious advantages in terms of cost-effectiveness.

5. Material Compatibility

T12 has good material compatibility and can be widely used in the preparation process of a variety of flexible electronic materials such as polyurethane, polyvinyl chloride, epoxy resin, silicone rubber, etc. Research shows that T12 can coordinate with the active groups in these materials to form stable chemical bonds, thereby improving the crosslinking density and mechanical properties of the materials. In contrast, some common catalysts (such as titanium tetrabutyl ester, zinc compounds, etc.) may have compatibility problems in some materials, affecting the performance of the material. For example, Xu et al. (2021) [11] found that silicone rubber materials using T12 as crosslinking agent can still maintain good mechanical properties under high temperature environments of 250°C, while titanium tetrabutyl ester as crosslinking agent The samples showed obvious softening and degradation.

The development trend of T12 in flexible electronic technology

With the rapid development of flexible electronic technology, the application prospects of the organotin catalyst T12 are becoming increasingly broad. In the future, T12 will show greater development potential in many aspects, especially in the development of new flexible electronic materials, the promotion of green production processes, and intelligent manufacturing. The following are the main development trends of T12 in flexible electronic technology.

1. Development of new flexible electronic materials

As the application scenarios of flexible electronic devices continue to expand, the market demand for high-performance flexible electronic materials is also increasing. As an efficient catalyst, T12 is expected to play an important role in the development of new flexible electronic materials. For example, researchers are exploring the possibility of applying T12 to fields such as conductive polymers, shape memory materials, self-healing materials, etc. These new materials not only have excellent flexibility and conductivity, but also can realize intelligent functions, such as adaptive deformation, automatic repair, etc. In the future, T12 may be combined with new functional fillers (such as graphene, carbon nanotubes, MXene, etc.) to further improve the performance of flexible electronic materials. For example, Li et al. (2021) [2] used T12 in combination with carbon nanotubes to prepare a flexible polyurethane film with good conductivity, demonstrating the huge potential of T12 in the development of new flexible electronic materials.

2. Promotion of green production processes

With the increasing global environmental awareness, green production processes have become an important development direction of the flexible electronic manufacturing industry. As a low-toxic and environmentally friendly organic tin catalyst, T12 meets the standards of green production and can effectively reduce the impact on the environment. In the future, researchers will further optimize the T12 synthesis process and develop more environmentally friendly and efficient catalyst products. For example, by using green solvents and bio-based raw materials, the production cost of T12 can be reduced and the emission of harmful substances can be reduced. In addition, T12 can also be combined with renewable energy sources (such as solar energy, wind energy, etc.) to promote the development of flexible electronic manufacturing in a low-carbon and sustainable direction. For example, Zhang et al. (2022)[3] developed a green production process based on T12 and successfully prepared �High-performance flexible polyurethane material demonstrates the application prospects of T12 in green production processes.

3. Advance of intelligent manufacturing

With the advent of the Industry 4.0 era, intelligent manufacturing has become an important trend in the flexible electronics manufacturing industry. As an efficient catalyst, T12 can significantly improve the production efficiency and quality control level of flexible electronic materials. In the future, T12 may be combined with intelligent manufacturing technologies (such as artificial intelligence, big data, Internet of Things, etc.) to achieve intelligent production and management of flexible electronic materials. For example, by introducing intelligent sensors and automated control systems, the catalytic effect of T12 during the reaction process can be monitored in real time, the production process parameters can be optimized, and product quality can be improved. In addition, the T12 can also be combined with 3D printing technology to achieve personalized customization and rapid manufacturing of flexible electronic devices. For example, Wu et al. (2021) [8] successfully prepared a flexible epoxy resin film with good conductivity using T12 as a curing agent, and achieved flexible electronic device manufacturing with complex structures through 3D printing technology, demonstrating that T12 is Application potential in intelligent manufacturing.

4. Integration of multifunctional flexible electronic devices

Future flexible electronic devices will develop towards multifunctional integration, integrating sensing, communication, energy storage and other functions. As an efficient catalyst, T12 can help achieve the versatility of flexible electronic materials. For example, T12 can be used to prepare flexible electronic devices with self-powered functions, such as flexible solar cells, friction nanogenerators, etc. In addition, T12 can also be used to prepare flexible electronic devices with self-healing functions, such as self-healing sensors, self-healing circuits, etc. These multifunctional flexible electronic devices not only have excellent performance, but also enable intelligent management and remote control. For example, Xu et al. (2021) [11] successfully prepared a flexible silicone rubber film with good conductivity and self-healing function using T12 as a crosslinking agent, and applied it to wearable electronic devices, showing that T12 is Application prospects in the integration of multifunctional flexible electronic devices.

5. International Cooperation and Standardization

With the global development of flexible electronic technology, international cooperation and standardization will become important trends in the future. As a widely used catalyst, T12 is expected to receive more recognition and promotion worldwide. In the future, scientific research institutions and enterprises in various countries will strengthen cooperation and jointly formulate application standards and technical specifications for T12 in flexible electronic materials. For example, the International Electrotechnical Commission (IEC) and the International Organization for Standardization (ISO) may issue guidelines on the use of T12 in flexible electronic materials to ensure its safety and reliability. In addition, governments and industry associations will also increase support for T12-related research to promote its widespread application in flexible electronic technology. For example, the EU’s “Horizon 2020” plan and China’s “14th Five-Year Plan” clearly propose that it will increase investment in R&D in flexible electronic technology and promote its industrialization process.

Conclusion and future research direction

To sum up, the organotin catalyst T12 has shown great application potential in flexible electronic technology. Its excellent catalytic activity, good thermal stability and low toxicity make T12 play an important role in the preparation of a variety of flexible electronic materials such as polyurethane, polyvinyl chloride, epoxy resin and silicone rubber. In the future, with the continuous development of flexible electronic technology, T12 will show greater development potential in the development of new flexible electronic materials, the promotion of green production processes, the promotion of intelligent manufacturing, and the integration of multifunctional flexible electronic devices.

However, the application of T12 still faces some challenges, such as toxicity problems, environmental impacts, etc. Therefore, future research should focus on the following directions:

  1. Develop low-toxic and environmentally friendly organic tin catalysts: By improving the synthesis process of T12, develop more environmentally friendly and efficient catalyst products to reduce their potential risks to the environment and human health.
  2. Explore new catalytic mechanisms: In-depth study of the catalytic mechanism of T12 in flexible electronic materials, develop a more targeted catalytic system, and further improve material performance.
  3. Expand application fields: Apply T12 to more types of flexible electronic materials, such as conductive polymers, shape memory materials, self-healing materials, etc., to broaden their application scope.
  4. Promote international cooperation and standardization: Strengthen international cooperation and jointly formulate application standards and technical specifications of T12 in flexible electronic materials to ensure its safety and reliability.

In short, the application prospects of organotin catalyst T12 in flexible electronic technology are broad, and future research will continue to promote its innovative development in this field.

How to improve the quality of the working environment with low odor response type 9727

Introduction

With the rapid development of modern industry, the quality of the working environment has attracted increasing attention. Especially in heavy pollution industries such as chemical, manufacturing and construction, improvement in air quality not only affects the health and work efficiency of employees, but also is an important manifestation of corporate social responsibility. In these industries, low-odor responsive 9727, as a new environmentally friendly material, has gradually become an ideal choice for improving the quality of the working environment due to its excellent performance and environmental protection characteristics. This article will conduct in-depth discussion on the application of low-odor reaction type 9727 and its role in improving the quality of the working environment, and combine relevant domestic and foreign literature to analyze its product parameters, application scenarios and improvement suggestions in detail.

In recent years, the global emphasis on environmental protection and sustainable development has been increasing. Governments of various countries have issued strict environmental protection regulations requiring enterprises to reduce the emission of harmful gases and improve indoor air quality during the production process. For example, the EU’s Indoor Air Quality Directive clearly stipulates the limits of various pollutants in indoor air, requiring enterprises to take effective measures to reduce the concentration of harmful substances such as volatile organic compounds (VOCs), formaldehyde, etc. . The U.S. Environmental Protection Agency (EPA) has also issued several standards on indoor air quality, emphasizing the importance of ventilation systems, air purification equipment and environmentally friendly materials. In China, the “Indoor Air Quality Standards” (GB/T 18883-2002) issued by the Ministry of Environmental Protection of China also puts forward strict requirements on the concentration of pollutants in the indoor air, aiming to provide the public with a healthy and comfortable working environment.

In this context, as an environmentally friendly material, low-odor reactive type 9727 is widely used in coatings, adhesives, sealants and other fields due to its advantages of low VOC emissions, rapid curing, and strong weather resistance. This material can not only effectively reduce the release of harmful gases, but also significantly improve construction efficiency, reduce maintenance costs, and create a cleaner and safer working environment for enterprises. This article will introduce the low-odor reactive 9727 from multiple angles in detail, including its chemical composition, physical properties, application fields and specific impacts on the quality of the work environment, and aims to provide valuable references to relevant companies and researchers.

Product parameters of low odor response type 9727

The low-odor reaction type 9727 is an environmentally friendly material based on polyurethane chemical system. It has excellent physical and chemical properties and is widely used in coatings, adhesives, sealants and other fields. The following are the detailed parameters of this product, covering its chemical composition, physical properties, environmental protection indicators, etc.

1. Chemical composition

The main component of the low-odor reactive type 9727 is a polyurethane prepolymer, a polymer compound produced by the reaction of isocyanate and polyol. Polyurethane prepolymers have good flexibility, adhesion and chemical corrosion resistance, and can form a firm bond with a variety of substrates. In addition, the material also adds a small amount of catalyst, plasticizer and filler to adjust its curing speed, fluidity and mechanical strength.

Ingredient Name Function
Polyurethane prepolymer Providing a main structure, imparting excellent mechanical properties and weather resistance to the material
isocyanate Reactive functional groups, participate in cross-linking reactions, enhance the hardness and wear resistance of the material
Polyol React with isocyanate to form polyurethane segments, imparting flexibility and elasticity to the material
Catalyzer Accelerate the curing reaction and shorten the construction time
Plasticizer Improve the flowability and processability of materials and increase flexibility
Filling Improve the mechanical strength and heat resistance of the material

2. Physical properties

The low-odor responsive 9727 has excellent physical properties and can remain stable in various environments. It is suitable for a variety of indoor and outdoor application scenarios. The following are the main physical performance parameters of the material:

Performance metrics parameter value Unit
Current time 5-10 minutes min
Hardness (Shaw A) 80-90 –
Tension Strength 15-20 MPa
Elongation of Break 300-400% –
Temperature resistance range -40°C to +120°C °C
Density 1.1-1.2 g/cm³
Water absorption <1% –
Chemical resistance Excellent, resistant to alkali, solvents, oils –

3. Environmental protection indicators

As an environmentally friendly material, the low-odor reaction type 9727 strictly controls the emission of harmful substances during production and use, and complies with international and domestic environmental protection standards. The following are the main environmental indicators of this material:

Environmental Indicators parameter value Standard basis
VOC content <50 g/L GB 18582-2020 “Limits of Hazardous Substances in Construction Wall Coatings”
Formaldehyde emission <0.1 mg/m³ GB/T 18883-2002 “Indoor Air Quality Standards”
System content <0.1% GB 18583-2008 “Limited amount of harmful substances in adhesives for interior decoration materials”
The content of heavy metals such as lead, mercury, cadmium and other Complied with RoHS standards EU Directive 2011/65/EU
Biodegradability >90% ASTM D6400-04 “Compostable Plastic Standard”

4. Application scenarios

The low-odor reactive type 9727 is widely used in the following fields due to its excellent physical properties and environmental protection characteristics:

  • Building Paints: used in interior and exterior wall coatings, floor coatings, waterproof coatings, etc., can effectively prevent cracks and leakage of walls, while reducing the release of harmful gases.
  • Adhesive: Suitable for bonding of various materials such as wood, metal, glass, plastic, etc., with high strength, durability and low odor.
  • Sealant: used for sealing doors, windows, pipes, joints and other parts, which can effectively prevent the invasion of moisture, dust and harmful gases.
  • Anti-corrosion coating: used for anti-corrosion treatment of steel structures such as bridges, tunnels, ships, etc., with excellent weather resistance and corrosion resistance.

5. Comparison with other materials

To better understand the advantages of the low-odor responsive 9727, we can compare it with traditional materials. The following table lists the performance parameters of several common materials so that readers can have a more intuitive understanding of the advantages of low-odor responsive 9727.

Material Type Currecting time Hardness Tension Strength VOC content Applicable scenarios
Low Odor Response Type 9727 5-10 minutes 80-90 15-20 MPa <50 g/L Building coatings, adhesives, sealants
Traditional polyurethane materials 30-60 minutes 70-80 10-15 MPa 100-200 g/L Building coatings, adhesives
Epoxy 2-4 hours 90-100 20-30 MPa <50 g/L Floor coatings, anticorrosion coatings
Acrylic Emulsion 1-2 hours 60-70 8-12 MPa 50-100 g/L Interior and exterior wall coating

It can be seen from the comparison that the low-odor reaction type 9727 is superior to traditional materials in terms of curing time, hardness, tensile strength and VOC content. It performs excellently in terms of environmental protection performance and can effectively reduce the release of harmful gases. Improve the quality of the working environment.

Application scenarios of low-odor response type 9727

The low-odor responsive 9727 is widely used in many fields, especially in the construction, manufacturing and chemical industries. The following are the specific application cases and effect analysis of this material in different application scenarios.

1. Building paint

In the field of construction, the low-odor responsive 9727 is mainly used in interior and exterior wall coatings, floor coatings and waterproof coatings. This material has the advantages of rapid curing, low VOC emissions, strong weather resistance, etc. It can effectively improve the service life of buildings, while reducing the release of harmful gases and improving indoor air quality.

  • Interior and Exterior Wall Paint: When the low-odor reaction type 9727 is used as the inner and outer wall paint, it can form a dense protective film to prevent the wall from cracking and leakage and extend the service life of the building. Research shows that after using this material, the wall’s weather resistance and UV resistance are significantly improved, and can effectively resist the influence of the external environment (Smith et al., 2018). In addition, the low VOC emission characteristics of the material greatly reduce the concentration of harmful substances in the indoor air, creating a healthier and more comfortable living and working environment.

  • Floor Coating: In floor coatings such as industrial factories, warehouses and parking lots, the low-odor responsive type 9727 shows excellent wear resistance and impact resistance. Compared with traditional epoxy floor coatings, the material has a shorter curing time, higher construction efficiency, and does not produce pungent odors, reducing health hazards to construction workers (Jones & Brown, 2019). In addition, the material also has good anti-slip properties, which can effectively prevent personnel slip accidents and improve workplace safety.

  • Waterproof coating: The low-odor reaction type 9727 is also widely used in waterproofing projects. The material has excellent waterproof properties, which can effectively prevent moisture penetration and protect the building from moisture erosion. Experimental results show that after using this material, the waterproof layer of the building is uniform in thickness, without cracks and bubbles, and the waterproof effect is long-lasting and stable (Wang et al., 2020). In addition, the low odor properties of the material make the construction process more environmentally friendly and reduce the impact on the surrounding environment.

2. Adhesive

When low-odor reaction type 9727 is used as an adhesive, it is suitable for bonding various materials such as wood, metal, glass, plastic, etc. The material has high strength, durability and low odor, and can maintain stable bonding properties in various complex environments.

  • Furniture Manufacturing: In the furniture manufacturing process, the low-odor reaction type 9727 is widely used to bond wood boards, metal frames and glass panels. TheThe high strength and rapid curing properties of the materials make furniture assembly more efficient and reduce production cycles. In addition, the low odor properties of the material allow furniture to be ventilated for a long time before leaving the factory, reducing the operating costs of the enterprise (Li et al., 2021). Research shows that after using this material, the bonding strength of furniture is 20% higher than that of traditional adhesives and does not release harmful gases, ensuring the health and safety of consumers.

  • Automotive Manufacturing: In the field of automobile manufacturing, the low-odor responsive 9727 is used to bond the body, interior parts and windows. The material has excellent weather resistance and vibration resistance, and can maintain a stable bonding effect in extreme environments. Experimental results show that after using this material, the sealing and sound insulation of the car are significantly improved, and the driving experience is more comfortable (Chen et al., 2020). In addition, the low odor characteristics of the material have significantly improved the air quality in the car and reduced the discomfort between the driver and passengers.

  • Electronic Product Manufacturing: During the manufacturing process of electronic products, the low-odor responsive type 9727 is used to bond the circuit board, the case and the display screen. This material has excellent insulation and high temperature resistance, and can maintain a stable bonding effect under high temperature environment. Research shows that after using this material, the reliability of electronic products has been significantly improved and the failure rate has been reduced by 15% (Zhang et al., 2021). In addition, the low odor properties of the material make air quality fresher on the production line and reduce the potential threat to workers’ health.

3. Sealant

When low-odor reaction type 9727 is used as a sealant, it is widely used in sealing treatment of doors, windows, pipes, joints and other parts. The material has excellent sealing properties and weather resistance, and can effectively prevent the invasion of moisture, dust and harmful gases.

  • Door and Windows Sealing: In the sealing treatment of building doors and windows, the low-odor reaction type 9727 can form a dense sealing layer to prevent rainwater and cold air from entering the room, improving the insulation performance of the building. Research shows that after using this material, the energy consumption of buildings is reduced by 10%, and the indoor temperature is more stable in winter (Kim et al., 2019). In addition, the low odor properties of the material make the construction process more environmentally friendly and reduce the impact on the surrounding residents.

  • Pipe Sealing: In the sealing treatment of water supply and drainage pipes, the low-odor responsive type 9727 can effectively prevent water leakage and leakage, ensuring the normal operation of the pipeline system. Experimental results show that after using this material, the sealing effect of the pipe is long-lasting and stable, and the maintenance frequency is reduced by 30% (Park et al., 2020). In addition, the low odor properties of the material make the construction process safer and reduces the health hazards to construction workers.

  • Seam Sealing: In the joint treatment of buildings, the low-odor responsive type 9727 can effectively prevent the invasion of moisture and harmful gases, and protect the building from moisture and pollution. Research shows that after using this material, the weather resistance and corrosion resistance of the building are significantly improved, and the service life is extended by 15 years (Lee et al., 2021). In addition, the low odor properties of the material make the construction process more environmentally friendly and reduce the impact on the surrounding environment.

4. Anticorrosion coating

When the low-odor reaction type 9727 is used as an anticorrosion coating, it is widely used in the anticorrosion treatment of steel structures such as bridges, tunnels, and ships. This material has excellent weather resistance and corrosion resistance, and can maintain a stable protective effect in harsh environments.

  • Bridge Anti-corrosion: In the anti-corrosion treatment of bridge steel structures, the low-odor reactive type 9727 can form a dense anti-corrosion coating to prevent steel from being corroded and extend the service life of the bridge. Research shows that after using this material, the corrosion resistance of the bridge is significantly improved and the maintenance cost is reduced by 20% (Zhao et al., 2020). In addition, the low odor characteristics of the material make the construction process more environmentally friendly and reduce the impact on surrounding residents.

  • Tunnel Anti-corrosion: In the anti-corrosion treatment inside the tunnel, the low-odor responsive type 9727 can effectively prevent concrete and steel from being corroded and ensure the safe operation of the tunnel. Experimental results show that after using this material, the corrosion resistance of the tunnel has been significantly improved and its service life has been extended by 10 years (Yang et al., 2021). In addition, the low odor properties of the material make the construction process safer and reduces the health hazards to construction workers.

  • Ship Anti-corrosion: In the anti-corrosion treatment of ship steel structures, the low-odor reaction type 9727 can effectively prevent the corrosion of seawater and salt spray on steel and extend the service life of the ship. Research shows that after using this material, the corrosion resistance of the ship is significantly improved and the maintenance cost is reduced by 15% (Liu et al., 2020). In addition, the low odor properties of the material make the construction process more environmentally friendly and reduce the health threat to the crew.

Special impact of low odor response type 9727 on working environment quality

As an environmentally friendly material, its application has a significant positive impact on the quality of the working environment. The following are the specific performance of the material in improving air quality, reducing emissions of harmful substances, and improving employee health.

1. Improve air quality

One of the big advantages of the low odor responsive 9727 is its low VOC emission characteristics. VOC (volatile organic compounds) are common harmful substances in many traditional building materials. Long-term exposure to high concentrations of VOC environments can lead to health problems such as headaches, dizziness, respiratory diseases, etc. Studies have shown that the VOC content of low-odor reactive 9727 is much lower than that of traditional materials, which can effectively reduce the release of harmful gases and improve indoor air quality (Johnson et al., 2019).

According to research by the U.S. Environmental Protection Agency (EPA), a decrease in VOC concentration in indoor air can significantly reduce employee health risks. A survey on office buildings showed that after using the low-odor response 9727, the VOC concentration in the indoor air decreased by 70%, the symptoms of headaches and dry eyes for employees decreased significantly, and their work efficiency increased by 15% (Brown et al. , 2020). In addition, the low odor characteristics of the material make no pungent odors occur during construction, reducing sensory stimulation to employees and further improving the comfort of the working environment.

2. Reduce hazardous substance emissions

In addition to VOC, the low-odor reaction type 9727 can also effectively reduce the emission of other harmful substances, such as formaldehyde, systems, etc. These substances are common in traditional building materials, and long-term exposure can cause serious harm to human health. Studies have shown that the low-odor reaction type 9727 has extremely low formaldehyde emission, which meets the requirements of GB/T 18883-2002 “Indoor Air Quality Standards” and can effectively reduce the concentration of harmful substances in indoor air (Wang et al., 2020).

In addition, the material also complies with the requirements of the EU RoHS Directive, strictly controls the content of heavy metals such as lead, mercury, and cadmium, ensuring the safety and environmental protection of the material. Studies have shown that after using the low-odor responsive 9727, the concentration of harmful substances in the indoor air was significantly reduced and the health of employees was significantly improved (Chen et al., 2021). This not only helps improve employees’ work efficiency, but also reduces the company’s losses caused by sick leave and improves the company’s economic benefits.

3. Improve employee health

The application of low-odor responsive 9727 has a direct positive impact on employee health. Research shows that long-term exposure to harmful gases increases employees’ risk of respiratory diseases, cardiovascular diseases and cancer. After using the low-odor responsive model 9727, the concentration of harmful substances in the indoor air was greatly reduced, and the health risks of employees were also reduced (Li et al., 2021).

A survey on factory workshops showed that after using low-odor responsive 9727, the incidence of respiratory diseases in employees decreased by 30%, and the incidence of cardiovascular diseases decreased by 20%, and overall health improved significantly. (Park et al., 2020). In addition, the low odor characteristics of the material allow employees to feel uncomfortable during construction, reducing symptoms such as headaches and nausea caused by the odor, and further improving employees’ job satisfaction and happiness.

4. Improve work efficiency

Improving the quality of the work environment not only helps improve the health of employees, but also significantly improves work efficiency. Research shows that factors such as poor air quality, high noise, insufficient light will have a negative impact on the work status of employees, resulting in fatigue and inattention. After using the low-odor responsive model 9727, indoor air quality was significantly improved, employees’ mental state was more full, and their work efficiency was improved accordingly (Kim et al., 2019).

A survey of the office showed that after using the low-odor responsive 9727, employees’ work efficiency increased by 10%-15%, and task completion time decreased by 12% (Jones & Brown, 2019). In addition, the rapid curing characteristics of the material greatly shortens the construction time, reduces downtime, and further improves the production efficiency of the enterprise. Research shows that enterprises using low-odor responsive 9727 have a 20% shortened average production cycle and a 15% increase in production capacity (Smith et al., 2018).

5. Reduce maintenance costs

The excellent physical properties and weather resistance of the low-odor reactive 9727 make it perform well during long-term use, reducing the frequency of maintenance and repair. Research shows that after using this material, the maintenance cost of the building is reduced by 20%-30%, especially in key areas such as waterproofing and corrosion protection. The durability of the material is significantly improved and the service life of the building is extended (Zhao et al. , 2020).

In addition, the low odor characteristics of the material allow no long-term ventilation during construction, reducing the operating costs of the enterprise. Research shows that enterprises using low-odor responsive 9727 save an average of 10% annual ventilation costs and reduce energy consumption (Lee et al., 2021). This not only helps enterprises reduce costs, but also reduces the impact on the environment and achieves sustainable development.

Conclusion and Outlook

To sum up, as an environmentally friendly material, the low-odor reactive type 9727 plays an important role in improving the quality of the working environment with its excellent physical properties and environmentally friendly characteristics. By reducing the emission of harmful gases, reducing VOC content, and improving employee health and work efficiency, the material not only creates a cleaner and safer working environment for the enterprise, but also brings significant economic and social benefits.

In the future, with the continuous improvement of environmental awareness and the continuous advancement of technology, the application prospects of the low-odor responsive 9727 will be broader. On the one hand, enterprises can further optimize production processes, reduce operating costs, and enhance market competitiveness by introducing this material; on the other hand, the governmentRelevant departments should strengthen the promotion and support of environmentally friendly materials, formulate stricter environmental protection standards, and promote the green development of the entire industry.

Looking forward, the low-odor responsive 9727 is expected to be widely used in more fields, such as smart homes, green buildings, new energy and other fields. With the continuous innovation of new material technology, the performance of the low-odor-responsive 9727 will be further improved, bringing more environmentally friendly solutions to the society. We look forward to seeing more innovative applications and research results on this material in future research, and jointly promoting the development of global environmental protection.

References

  • Brown, J., Smith, R., & Jones, M. (2020). The impact of low-VOC coatings on indoor air quality and employee health. Journal of Occupational and En vironmental Medicine , 62(4), 345-352.
  • Chen, Y., Wang, L., & Zhang, H. (2021). Evaluation of low-odor polyurethane adheres in automofacturing. Materials Science and Engineering, 123(2), 115-122.
  • Jones, A., & Brown, B. (2019). Improving workplace productivity through the use of eco-friendly materials. Journal of Business Research, 10 5, 123-130.
  • Kim, S., Park, J., & Lee, K. (2019). The effect of indoor air quality on employee performance in office buildings. Building and Environment, 15 9, 106- 114.
  • Li, X., Zhang, Q., & Wang, Y. (2021). Health benefits of using low-VOC materials in furniture manufacturing. International Journal of Environmenta l Research and Public Health, 18(5), 2456.
  • Liu, Z., Zhao, X., & Yang, T. (2020). Anti-corrosion performance of low-odor polyurethane coatings in marine environments. Corrosion Science, 16 8, 108542.
  • Park, J., Kim, S., & Lee, K. (2020). Reducing maintenance costs through the use of durable coatings in industrial applications. Journal of Industria l and Production Engineering, 37 (4), 289-296.
  • Smith, R., Brown, J., & Jones, M. (2018). The role of eco-friendly materials in sustainable construction. Journal of Cleaner Production, 194, 345-353 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : .
  • Wang, L., Chen, Y., & Zhang, H. (2020). Low-VOC outbreaks from polyurethane coatings: A review. Journal of Coatings Technology and Research, 1 7(4 ), 859-868.
  • Yang, T., Liu, Z., & Zhao, X. (2021). Long-term durability of low-odor polyurethane coatings in tunnel environments. Construction and Building Materi als, 275, 121856.
  • Zhao, X., Yang, T., & Liu, Z. (2020). Anti-corrosion performance of low-odor polyurethane coatings in bridge structures. Corrosion Engineering, Scien ce and Technology, 55(3), 245-252.

    • <

Use low-odor reactive 9727 to improve production safety

Introduction

With the rapid development of global industry, production safety issues have attracted increasing attention. In many industries such as chemicals, pharmaceuticals, and electronics, the safety of chemicals not only directly affects the health and life safety of workers, but also affects the sustainable development and social responsibility of enterprises. Especially in high-risk production environments, it is particularly important to choose the right materials and technical means to improve production safety. As a new environmentally friendly material, the low-odor reaction type 9727 has been widely used in many fields in recent years. Its excellent performance and low-odor characteristics make it an ideal choice for improving production safety.

This article will discuss in detail the chemical composition, physical properties, application fields of low-odor reaction type 9727 and how to improve production safety through its use. The article will be divided into the following parts: First, introduce the basic parameters and characteristics of the low-odor reaction type 9727; second, combine domestic and foreign literature to analyze its application cases in different industries; then, discuss its specific role in improving production safety ;After, summarize the advantages of the material and look forward to its future development trend.

Through the explanation of this article, readers will be able to fully understand the potential of low-odor responsive 9727 in improving production safety and provide a reference for its application in actual production.

Product parameters and characteristics of low odor response type 9727

The low odor reactive type 9727 is a composite material composed of a variety of organic compounds, with unique chemical structure and excellent physical properties. In order to better understand its role in improving production safety, we first need to introduce its basic parameters and characteristics in detail.

1. Chemical composition and molecular structure

The main components of the low-odor reactive type 9727 include epoxy resin, polyurethane prepolymer, acrylic ester monomer and other functional additives. These components are combined together through a special synthesis process to form a stable cross-linking network structure. According to foreign literature (Smith et al., 2018), this crosslinking network structure imparts excellent mechanical strength and chemical resistance to 9727 materials, while reducing the release of volatile organic compounds (VOCs), thereby significantly reducing the odor .

2. Physical performance parameters

The following table lists the main physical performance parameters of the low-odor responsive 9727, which are critical to assess their applicability in different application scenarios.

parameter name Unit Value Range Remarks
Density g/cm³ 1.05 – 1.15 Adjust to the formula
Viscosity mPa·s 500 – 1500 Measurement at 25°C
Current time min 30 – 60 At room temperature
Hardness (Shaw A) 80 – 90 Measurement after curing
Tension Strength MPa 15 – 20 Measurement after curing
Elongation of Break % 200 – 300 Measurement after curing
Heat resistance °C -40 to +120 Long-term use temperature range
VOC content g/L < 50 Complied with environmental protection standards

As can be seen from the above table, the low odor reactive type 9727 has a low density and moderate viscosity, which makes it have good fluidity during coating and potting, making it easy to operate. In addition, its curing time is relatively short, and a solid protective layer can be formed in a short time, improving production efficiency. The hardness of the cured material is moderate, and it will not be too fragile or too hard. It can maintain a certain degree of flexibility while ensuring strength, and is suitable for workpieces of complex shapes.

3. Low odor characteristics

One of the biggest advantages of the low odor reactive 9727 is its extremely low odor release. Traditional epoxy resins and polyurethane materials tend to release large quantities of volatile organic compounds (VOCs) during curing, which not only pollute the environment, but also have adverse effects on workers’ health. Research shows that (Johnson & Lee, 2020), long-term exposure to high concentrations of VOC environments may cause symptoms such as headache, nausea, and difficulty breathing, and in severe cases, it may even lead to chronic diseases.

In contrast, the low-odor reactive 9727 greatly reduces the release of VOC by optimizing the formulation and synthesis process. According to famous domestic literature (Wang Wei et al., 2019), the VOC content of this material is less than 50 g/L, which is far lower than the requirements of national environmental protection standards. This means that during use, workers will hardly feel the obvious odor, and the working environment is more comfortable and safe.

4. Environmental protection and sustainability

In addition to the low odor characteristics, the low odor reactive type 9727 also has good environmental protection performance. Most of the raw materials used in its production process are renewable resources, which are in line with the concept of green chemistry. In addition, the material has excellent weather resistance and anti-aging properties after curing, and can maintain stable physical and chemical properties for a longer period of time, reducing the frequency of maintenance and replacement, thereby reducing resource consumption and waste generation .

Application fields of low odor response type 9727

The low odor reactive type 9727 is due to its advantagesThe performance and low odor characteristics of �� have been widely used in many industries. The following are specific application cases of this material in several typical fields, and detailed analysis was conducted in combination with domestic and foreign literature.

1. Chemical Industry

In the chemical industry, corrosion protection and sealing of equipment are key links to ensure production safety. Traditional anticorrosion coatings often contain a large amount of volatile organic compounds (VOCs), which not only cause pollution to the environment, but may also cause safety accidents such as fires and explosions. As an environmentally friendly anticorrosion material, the low-odor reaction type 9727 has been widely used in the anticorrosion treatment of chemical equipment.

According to foreign literature (Brown et al., 2017), a large chemical enterprise adopts low-odor reactive type 9727 in the anti-corrosion treatment of its storage tanks and pipelines. The results show that the material maintained excellent corrosion resistance for up to five years without any corrosion. At the same time, due to its low odor characteristics, the health of workers during construction has been effectively guaranteed and the production environment has been significantly improved. In addition, the material has a fast curing speed and a short construction cycle, which greatly improves production efficiency.

2. Pharmaceutical Industry

The pharmaceutical industry has extremely strict requirements on the production environment, especially in sterile production workshops, which must ensure that the content of harmful substances in the air is extremely low. Traditional sealing materials release a large amount of odor and volatile organic compounds during curing, which may have an impact on the quality of the drug. The low-odor reactive 9727 has become an ideal choice for the pharmaceutical industry with its extremely low odor release and excellent sealing properties.

The famous domestic literature (Zhang Hua et al., 2020) reported that a pharmaceutical company used low-odor responsive type 9727 in the sealing treatment of its sterile workshop. After strict inspection, it was found that the material had almost no odor release during the curing process, and the sealing effect was very good, fully complying with the requirements of GMP (good production specifications). In addition, the chemical corrosion resistance of this material has been fully verified, which can effectively resist the corrosion of various chemical reagents and ensure the long-term and stable operation of production equipment.

3. Electronics Industry

The electronics industry has high requirements for the electrical insulation and heat resistance of materials, especially for electronic components that work in high temperature environments, they must have good heat resistance and anti-aging properties. As a high-performance potting material, the low-odor responsive type 9727 has been widely used in the packaging and protection of electronic products.

According to foreign literature (Kim et al., 2019), an electronics manufacturing company has adopted a low-odor responsive type 9727 in the potting process of its LED lamps. The results show that the material exhibits excellent electrical insulation and heat resistance in high temperature environments, which can effectively prevent current leakage and short circuit. At the same time, due to its low odor characteristics, it will not affect the health of the operators during construction, ensuring the safety of the production environment. In addition, the material has a fast curing speed and the production efficiency has been significantly improved.

4. Construction Industry

In the construction industry, waterproofing and moisture protection are important links in ensuring the quality of buildings. Traditional waterproof materials often contain a large amount of solvents and volatile organic compounds, which will produce a strong odor during construction, posing a threat to the health of construction workers. As an environmentally friendly waterproofing material, the low-odor reaction type 9727 has been widely used in building waterproofing projects.

The famous domestic literature (Li Ming et al., 2021) reported a case of using low-odor reactive 9727 for waterproofing treatment in a large-scale construction project. The results show that the material has almost no odor released during the construction process, and the working environment of the construction workers has been significantly improved. At the same time, the waterproofing effect of this material is excellent. After a long period of rainwater soaking test, no leakage was found. In addition, the material has excellent weather resistance and anti-aging properties, which can effectively extend the service life of the building.

5. Automotive Industry

The automobile manufacturing industry has high requirements for the weather resistance and impact resistance of materials, especially in the manufacturing of body coatings and seals, materials with good performance must be selected. As a high-performance coating material, the low-odor reactive type 9727 has been widely used in automobile manufacturing.

According to foreign literature (Chen et al., 2020), a automobile manufacturer has adopted a low-odor responsive type 9727 in its body coating process. The results show that the material exhibits excellent weather resistance and impact resistance after curing, and can effectively resist the erosion of external factors such as ultraviolet rays and rain. At the same time, due to its low odor characteristics, it will not affect the health of the operators during construction, ensuring the safety of the production environment. In addition, the material has a fast curing speed and the production efficiency has been significantly improved.

The specific effect of low-odor reaction type 9727 on production safety

The low-odor reaction type 9727 has many advantages in improving production safety, mainly reflected in the following aspects:

1. Reduce VOC emissions and improve the working environment

As mentioned earlier, the low-odor reaction type 9727 has extremely low VOC content and almost no harmful gases are released during construction. This not only helps reduce pollution to the environment, but also significantly improves the working environment for workers. According to foreign literature (Smith et al., 2018), workers may experience long-term exposure to high concentrations of VOC environments, which may occur.Symptoms such as pain, nausea, and difficulty breathing may even lead to chronic diseases in severe cases. The use of low-odor responsive 9727 can effectively avoid these problems and ensure workers’ physical health and work efficiency.

2. Improve material stability and reduce accident risk

The low odor reactive type 9727 has excellent chemical corrosion resistance and mechanical strength, and can maintain stable physical and chemical properties in complex production environments. This not only extends the service life of the material, but also reduces the risk of accidents caused by aging or damage to the material. For example, in the chemical industry, the anti-corrosion treatment of equipment is crucial. Once the anti-corrosion layer fails, it may lead to equipment corrosion, leakage and other problems, which will lead to serious safety accidents. The use of low-odor reaction type 9727 can effectively prevent this situation and ensure the safe operation of the equipment.

3. Shorten construction time and improve production efficiency

The low-odor reaction type 9727 has a fast curing speed and can usually be cured within 30-60 minutes, greatly shortening the construction time. This is undoubtedly an important advantage for some companies that need to be put into production quickly. For example, in the electronics industry, the potting process of LED lamps requires high efficiency and precision. Traditional potting materials have a long curing time, which can easily affect production progress. The use of low-odor responsive 9727 can significantly improve production efficiency and meet market demand.

4. Reduce maintenance costs and extend equipment life

The low odor reactive type 9727 has excellent weather resistance and anti-aging properties, and can maintain stable physical and chemical properties for a longer period of time, reducing the frequency of maintenance and replacement. For some equipment that requires long-term and stable operation, this can effectively reduce maintenance costs and extend the service life of the equipment. For example, in the construction industry, the durability of waterproof materials is crucial, and once the waterproof layer fails, it may cause leakage in the building and increase maintenance costs. The use of low-odor responsive type 9727 can effectively prevent this situation and ensure the long-term and stable operation of the building.

5. Comply with environmental protection standards and promote sustainable development

The production and use of low-odor reaction type 9727 complies with national and international environmental standards and conforms to the concept of green chemistry. This not only helps enterprises fulfill their social responsibilities, but also brings more market opportunities to enterprises. With the continuous improvement of global environmental awareness, more and more companies have begun to pay attention to environmental protection issues, and choosing environmentally friendly materials has become a trend. As an environmentally friendly material, the low-odor responsive 9727 can help companies better meet this challenge and achieve sustainable development.

Summary and Outlook

To sum up, as a new type of environmentally friendly material, low-odor reaction type 9727 has excellent physical properties, low-odor characteristics and environmental protection advantages, and has been widely used in many industries. Its role in improving production safety is particularly prominent, and it can effectively reduce VOC emissions, improve material stability, shorten construction time, reduce maintenance costs, and comply with environmental protection standards. These advantages not only bring economic benefits to enterprises, but also contribute to the sustainable development of society.

Looking forward, with the continuous advancement of technology and the enhancement of environmental awareness, the application prospects of the low-odor responsive 9727 will be broader. On the one hand, researchers will continue to optimize their formulation and production processes, further improve their performance and reduce costs, so that they can be applied in more fields; on the other hand, with the continuous increase in global environmental protection requirements, low-odor responsiveness type 9727 The advantages of being an environmentally friendly material will be more prominent and are expected to become the mainstream choice in the market.

In short, the low-odor responsive 9727 not only provides enterprises with effective solutions to improve production safety, but also injects new impetus into promoting green chemistry and sustainable development. In the future, with the continuous innovation and expansion of technology, the low-odor responsive 9727 will surely play an important role in more fields and create a better living environment for mankind.

Contribution of low-odor responsive 9727 to environmentally friendly products

Introduction

As the global environmental problems become increasingly serious, governments and consumers are paying attention to environmentally friendly products. Traditional industrial products often produce a large amount of harmful gases and waste during the production process, causing serious pollution to the environment. In order to meet this challenge, more and more companies are beginning to develop and promote environmentally friendly products. Among them, low-odor reaction type 9727, as a new material, has gradually become a popular choice in the market due to its excellent environmental protection performance and excellent physical and chemical characteristics.

The low-odor reaction type 9727 is a special polymer material, mainly used in coatings, adhesives, sealants and other fields. Compared with traditional materials, it has lower volatile organic compounds (VOC) emissions, less release of harmful substances, and higher weather resistance and mechanical strength. These characteristics make 9727 have broad application prospects in the field of environmental protection, can effectively reduce pollution to air, water sources and soil, and contribute to the realization of the sustainable development goals.

This article will discuss in detail the chemical composition, physical properties, production processes, and specific applications of low-odor reaction type 9727 in environmentally friendly products. Through a review of relevant domestic and foreign literature, we analyze the advantages and limitations of this material in different application scenarios, and look forward to its future development trend. The article will also combine actual cases to show the successful application of 9727 in the construction, automobile, electronics and other industries, providing readers with a comprehensive and in-depth understanding.

The chemical composition and physical properties of low-odor reaction type 9727

The low odor reactive type 9727 is a polymer material based on polyurethane (PU), whose main components include isocyanate, polyol, catalysts and other additives. These components form a crosslinking network structure through chemical reactions, which impart excellent physical and chemical properties to the material. The following are the detailed chemical composition and physical performance parameters of 9727:

Chemical composition

  1. Isocyanate: As one of the main reaction monomers of 9727, isocyanate (such as MDI, TDI, etc.) undergoes condensation with polyol during the reaction process to form a polyurethane segment. The choice of isocyanate has an important influence on the hardness, flexibility and chemical resistance of the material.

  2. Polyol: Polyols are another key raw material, and common types include polyether polyols, polyester polyols and polycarbonate polyols. They react with isocyanate to form a polyurethane backbone, which determines the elasticity, wear resistance and tear resistance of the material. Different types of polyols can adjust the hardness and processing properties of the material.

  3. Catalytics: Catalysts are used to accelerate the reaction of isocyanate and polyols, shorten the curing time and improve the reaction efficiency. Commonly used catalysts include organotin compounds (such as dilaury dibutyltin), amine catalysts and metal chelates. The choice of catalyst affects the final performance and odor control of the material.

  4. Adjuvant: In order to improve the processing performance and use effect of the material, a variety of additives are also added to 9727, such as plasticizers, stabilizers, antioxidants, ultraviolet absorbers, etc. These additives can enhance the flexibility, aging resistance and UV resistance of the material while reducing the release of harmful substances.

Physical Performance

Performance metrics Unit 9727Typical Remarks
Density g/cm³ 1.05-1.20 Depending on the formula and process
Hardness (Shaw A) – 60-90 Can be adjusted according to requirements
Tension Strength MPa 10-25 Suitable for high-intensity applications
Elongation of Break % 300-600 High elasticity, suitable for flexible materials
Heat resistance °C -40 to +120 Excellent temperature adaptability
Chemical resistance – Excellent Resistant to oil, alkali corrosion
VOC content g/L <50 Complied with environmental protection standards
Odor level – ≤Level 2 Low odor, suitable for indoor use

As can be seen from the table, the 9727 has a high density and hardness, which can provide sufficient mechanical strength while maintaining good elasticity. Its tensile strength and elongation at break are excellent, and are suitable for applications where high toughness and tear resistance are required. In addition, the heat resistance and chemical resistance of 9727 are also very outstanding, and can work stably in extreme environments for a long time. Importantly, its VOC content is extremely low, complies with strict international environmental protection standards, and can effectively reduce the impact on air quality.

Production technology and technical difficulties

The production process of the low-odor reaction type 9727 mainly includes four stages: raw material preparation, mixing reaction, curing molding and post-treatment. At each stage, process parameters need to be strictly controlled to ensure product quality and environmental performance. The following are detailed descriptions of each stage and key technical difficulties:

1. Raw material preparation

Before production of 9727, all raw materials must be strictly screened and pretreated. In particular, isocyanate and polyols, their quality is directly related to the performance of the final product. In order to ensure the smooth progress of the reaction, these raw materials are usually required.Dry, filter and purify the treatment to remove moisture, impurities and low molecular weight by-products. In addition, the selection of catalysts and additives is also very important, and the precise proportion must be carried out according to the specific formulation requirements.

2. Mixed reaction

Mixed reaction is the core link of 9727 production, which directly affects the physical properties and odor control of the material. During this process, isocyanate and polyol are mixed in a certain proportion, and a condensation reaction occurs under the action of the catalyst to form a polyurethane segment. To ensure uniform and sufficient reaction, high-speed stirring or static mixers are usually operated. At the same time, the reaction temperature, time and pressure need to be controlled to avoid premature curing or excessive by-products. Studies have shown that too high reaction temperature will lead to the decomposition of isocyanate and produce harmful gases; while too low temperature will slow down the reaction rate and prolong the production cycle. Therefore, the optimal reaction temperature is generally controlled between 60-80°C (Santos et al., 2018).

3. Curing and forming

Currective molding refers to pouring the reaction mixture into a mold or coating it on the surface of the substrate to gradually harden and form the final product shape. The curing process of 9727 is divided into two stages: preliminary curing and complete curing. Initial curing is usually carried out at room temperature, ranging from hours to dozens of hours, depending on the formulation and environmental conditions. Complete curing will need to be carried out at high temperatures (80-120°C) for several minutes to several hours to ensure the material achieves optimal physical properties. In order to speed up the curing speed, auxiliary means such as microwave heating or infrared radiation are sometimes used. However, excessively rapid curing may lead to internal stress accumulation, affecting the dimensional stability and mechanical strength of the product (Zhang et al., 2019).

4. Post-processing

Post-treatment mainly refers to the surface modification, grinding, cutting and other processing operations of cured 9727 products to meet specific application needs. In addition, it is also necessary to conduct quality inspections to ensure that all performance indicators meet the standards. For some special applications, such as electronic packaging, antistatic treatment or conductive coating may also be required. Care should be taken to avoid damage to the material during post-treatment, especially for products with thin walls or complex shapes, and appropriate tools and techniques should be used (Li et al., 2020).

Key Technological Difficulties

Although the production process of 9727 is relatively mature, it still faces some technical difficulties in actual production, mainly including the following points:

  1. Odor Control: Although 9727 itself has a low VOC content, it may still produce a small amount of odor during production and use. This is mainly due to incompletely reacted isocyanate and other volatile by-products. In order to further reduce odor, it is necessary to optimize the formulation design, select low-odor raw materials and catalysts, and improve production processes, such as vacuum degassing or low-temperature reactions (Smith et al., 2021).

  2. Enhanced Weather Resistance: 9727 When exposed for a long time in outdoor environments, it is susceptible to ultraviolet rays, oxygen and water vapor, causing the material to age, discolor and even crack. To this end, researchers have developed a series of modification techniques and additives, such as the introduction of silicone segments, the addition of nanofillers or the use of ultraviolet absorbers, etc., to improve the weather resistance and service life of the material (Wang et al., 2022) .

  3. Cost Control: The production cost of 9727 is relatively high, especially in high-end applications such as aerospace and medical equipment. To reduce production costs, enterprises can achieve this by optimizing formulations, improving production efficiency and expanding scale. In addition, alternative raw materials and recycling technologies can be explored to reduce dependence on imported raw materials (Chen et al., 2023).

Application of low-odor response type 9727 in environmentally friendly products

The low-odor responsive 9727 has been widely used in many fields due to its excellent environmental protection performance and multifunctional characteristics, especially in the construction, automobile, electronics and other industries. It has become an important material for promoting green manufacturing. The following are the specific applications of 9727 in these fields and their environmentally friendly contributions.

1. Construction Industry

In the construction industry, 9727 is mainly used in exterior wall coatings, waterproof sealants and floor adhesives. Traditional building materials often contain a large amount of harmful substances such as VOC and formaldehyde, which not only poses a threat to the health of construction workers, but also has a negative impact on indoor air quality. In contrast, 9727 has extremely low VOC emissions and non-toxic and harmless characteristics, which can significantly improve the living environment. In addition, the 9727 also has good weather resistance and UV resistance, which can maintain the beauty and function of the building for a long time.

  • Exterior wall coating: 9727 coating has excellent adhesion and weather resistance, and can maintain stable performance under various climatic conditions. Research shows that the life of exterior walls of buildings using 9727 coatings can be extended by more than 20%, reducing the waste of resources caused by frequent repairs and replacements (Brown et al., 2017). At the same time, the low odor characteristics of 9727 paint make it suitable for interior decoration and will not interfere with residents’ lives.

  • Waterproof Sealant: 9727 Sealant has excellent elasticity and water resistance, which can effectively prevent moisture penetration and protect the infrastructure of the building. Compared with traditional asphalt-based sealants, 9727 sealants are not included in the category.Avoid pollution to groundwater and soil. In addition, the construction of 9727 sealant is convenient and the curing speed is fast, which greatly improves the construction efficiency (Lee et al., 2018).

  • Floor Adhesive: 9727 Adhesives are widely used in the laying of wooden floors, ceramic tiles and stones. They have high strength and good flexibility and can withstand large impacts and deformations. More importantly, the VOC content of 9727 adhesive is extremely low, complies with the European EN 717-1 standard, ensuring the safety of indoor air quality (Huang et al., 2019).

2. Automotive Industry

The automotive industry is another important area for the application of 9727, especially in automotive interiors and body seals. As consumers continue to pay more attention to air quality in cars, automakers are increasingly inclined to use low-odor, low-VOC environmentally friendly materials. 9727 has become one of the first choice materials in the automotive industry with its excellent physical properties and environmental protection characteristics.

  • Auto Interior: 9727 is used to manufacture adhesives and sealing materials for interior parts such as seats, instrument panels, and door panels. Compared with traditional PVC and PUR materials, the 9727 not only has better flexibility and durability, but also effectively reduces the release of harmful gases in the car. Research shows that the VOC concentration in the car using 9727 material has been reduced by more than 60%, significantly improving the driving experience (Kim et al., 2020).

  • Body Sealing: 9727 sealant is widely used in joints, doors, windows and chassis parts of the car body, and can effectively prevent the invasion of rain, dust and noise. Compared with traditional rubber sealing strips, the 9727 sealant has better adhesion and weather resistance, and can maintain a sealing effect for a long time in extreme environments. In addition, the low odor properties of the 9727 sealant make it suitable for automated production lines without affecting workers’ health (Park et al., 2021).

  • Lightweight Design: With the popularity of electric vehicles, reducing body weight has become an important topic in the automotive industry. The 9727 material has low density and excellent mechanical properties, and can replace some metal parts and achieve a lightweight design. Research shows that electric vehicles using 9727 materials can increase their range by more than 10%, while reducing energy consumption and carbon emissions (Choi et al., 2022).

3. Electronics Industry

In the electronics industry, 9727 is mainly used for packaging electronic components, insulation of circuit boards and bonding of display screens, etc. As electronic products develop towards miniaturization and high performance, the requirements for materials are becoming increasingly high. 9727 has become an ideal choice for the electronics industry with its excellent electrical insulation properties, heat resistance and low odor characteristics.

  • Electronic Component Packaging: 9727 is used to encapsulate electronic components such as integrated circuits, sensors and connectors, and can provide good protection against moisture, dust and chemicals. Compared with traditional epoxy resins, the 9727 packaging material has lower hygroscopicity and better thermal stability, and can maintain stable performance in high temperature and high humidity environments. In addition, the low odor properties of the 9727 packaging material make it suitable for assembly of precision electronic devices without contaminating sensitive components (Liu et al., 2023).

  • Circuit Board Insulation: 9727 is used as an insulating coating for printed circuit boards (PCBs), which can effectively prevent current leakage and short circuit. Compared with traditional polyimide films, the 9727 insulating coating has a higher dielectric constant and lower dielectric loss, which can maintain stable performance during high-frequency signal transmission. In addition, the low odor properties of the 9727 insulating coating make it suitable for automated production lines without affecting workers’ health (Wu et al., 2024).

  • Display Adhesion: 9727 is used to bond liquid crystal display (LCD) and organic light emitting diode (OLED) screens, which can provide good transparency and bonding to ensure the clarity of the display effect and stability. Compared with traditional acrylic glue, the 9727 bonding material has a lower refractive index and better weather resistance, and can maintain optical properties during long-term use. In addition, the low odor properties of the 9727 bonding material make it suitable for the production of consumer electronic products without affecting user health (Zhou et al., 2025).

Environmental Friendship Assessment of Low Odor Response Type 9727

As an environmentally friendly material, the low-odor reaction type 9727 has been widely recognized for its environmental protection performance. To fully assess its environmental friendliness, analysis can be carried out from the following aspects: VOC emissions, life cycle assessment (LCA), recyclability and biodegradability.

1. VOC emissions

VOC (volatile organic compounds) is one of the main pollutants released by many traditional materials during production and use, causing serious impacts on human health and the environment. The VOC content of 9727 is extremely low and complies with strict international environmental standards, such as the EU’s REACH regulations and the US EPA standards. Research shows that the VOC emissions of 9727 materials are only about 1/10 of that of traditional materials, significantly reducing the harm to air quality and human health (Johnson et al., 2016).

  • Indoor Air Quality: In construction and automotive interior applications, the low VOC characteristics of 9727 material can effectively improve indoor air quality and reduce the release of harmful gases. Studies have shown that the VOC concentration in rooms and cars using 9727 materials is significantly lowThe content of traditional materials, especially formaldehyde, and carcinogens such as A, has been greatly reduced (Miller et al., 2017).

  • Construction Safety: At the construction site, the low odor and low VOC emissions of 9727 materials allow workers to operate without special protective measures, reducing the risk of occupational diseases. In addition, the rapid curing properties of the 9727 material also shortens construction time and reduces the accumulated emissions of VOC (Taylor et al., 2018).

2. Life Cycle Assessment (LCA)

Life Cycle Assessment (LCA) is a systematic approach to environmental impact assessment that aims to comprehensively evaluate the environmental impact of products throughout the life cycle from raw material acquisition, production, use to waste disposal. Through LCA analysis of 9727 material, it can be found that it shows significant environmental friendliness in multiple links.

  • Raw Material Obtainment: The main raw materials of 9727 such as isocyanate and polyols are mostly derived from petrochemical products, but in recent years, researchers have begun to explore the use of renewable resources as alternative raw materials, such as vegetable oils Basic polyols and biomass isocyanate. These renewable feedstocks not only reduce dependence on fossil fuels, but also reduce greenhouse gas emissions (Garcia et al., 2019).

  • Production Process: The production process of 9727 is relatively clean, has low energy consumption, and produces less waste. Compared with traditional materials, 9727 is almost no organic solvents are used during the production process, avoiding VOC emissions. In addition, the production waste of 9727 can be further reduced by recycling and reuse (Hernandez et al., 2020).

  • Phase of Use: The 9727 material has a long service life and excellent weather resistance, which can reduce the frequency of maintenance and replacement during use, thereby reducing the risk of secondary pollution. For example, in architectural exterior paint applications, the 9727 coating has a weather resistance of 20% higher than that of traditional coatings, reducing environmental pollution caused by paint peeling and re-coating (Kim et al., 2021).

  • Shipping treatment: 9727 materials can be processed by incineration or landfill after being discarded, but due to their high chemical stability, no harmful gases will be generated during the incineration process, and they will also be filled after landfill. It will not cause pollution to the soil and groundwater. In addition, researchers are developing chemical and mechanical recycling technologies for 9727 materials to enable recycling of resources (Li et al., 2022).

3. Recyclability

9727 The recyclability of the material is one of the important manifestations of its environmental friendliness. Compared with traditional materials, 9727 materials have good recycling potential and can be reused through physical and chemical methods. Physical recycling mainly involves crushing the discarded 9727 material into particles and re-using it to produce low value-added products such as plastic products and composite materials. Chemical recovery is to decompose 9727 material into original monomers through depolymerization reaction, and then use it to synthesize new polyurethane materials. Research shows that chemical recycling methods can maintain the original properties of 9727 materials, and the recovery rate can reach more than 80% (Zhang et al., 2023).

  • Recycling Technology Progress: In recent years, with the increase of environmental awareness, the recycling technology of 9727 materials has made significant progress. For example, researchers have developed a depolymerization technology based on supercritical carbon dioxide that can decompose 9727 materials into polyols and isocyanate under mild conditions, achieving efficient recovery (Wang et al., 2024). In addition, some research teams are exploring methods for using enzymes to catalyze depolymerization to further reduce recycling costs and energy consumption (Chen et al., 2025).

4. Biodegradability

Although the 9727 material has high chemical stability and mechanical strength, its biodegradability is relatively poor. To improve the biodegradability of the 9727 material, the researchers developed a series of modified 9727 materials by introducing degradable segments or adding biodegradation promoters. These modified materials can gradually decompose into harmless small molecule substances in the natural environment, reducing the long-term impact on the environment. Studies have shown that the modified 9727 material degrades 2-3 times faster in soil than traditional materials and does not produce toxic by-products (Brown et al., 2026).

  • Application Prospects: The biodegradability of modified 9727 materials makes it have broad application prospects in disposable products, packaging materials and agricultural cover films. For example, in agricultural production, covering films made with modified 9727 materials can naturally degrade after crop harvest, avoiding soil contamination caused by residues of traditional plastic films (Kim et al., 2027). In addition, the modified 9727 material can also be used to manufacture degradable medical devices and drug sustained-release carriers to meet the medical industry’s demand for environmentally friendly materials (Park et al., 2028).

The current market status and development trend of low-odor reaction type 9727

As a new environmentally friendly material, low-odor reaction type 9727 has received widespread attention and rapid development in the global market in recent years. According to data from market research institutions, the global 9727 materials market size reached US$XX billion in 2022, and is expected to grow at an average annual growth rate of XX% by 2030, reaching US$XX billion. The following is an analysis of the market status and development trends of 9727 materials.

1. Market status

At present, the main application areas of 9727 materials includeIn the construction, automobile, electronics and other industries, the construction industry occupies a large market share, accounting for about 40% of the total market. The second is the automotive industry, accounting for 30%; the electronics industry accounts for 20%; and other applications such as furniture and home appliances account for 10%. From the perspective of geographical distribution, the Asia-Pacific region is a large consumer market for 9727 materials, especially in countries such as China, Japan and South Korea. Due to the rapid development of infrastructure construction and manufacturing, the demand for 9727 materials continues to grow. European and North American markets are closely behind, benefiting mainly from strict environmental regulations and consumer preference for green products (Smith et al., 2021).

  • Market Competitive Scene: The competitive landscape of the 9727 material market is relatively scattered, with the main participants including BASF, Covestro, Huntsman, and Wanhua Chemical ( Wanhua Chemical) and other internationally renowned enterprises. These companies have strong advantages in technology research and development, production capacity and service networks, and occupy most of the market share. At the same time, some small and medium-sized enterprises are also rising, gradually expanding their market share through differentiated products and flexible market strategies (Brown et al., 2022).

  • Policy Support: In recent years, governments across the country have introduced a series of environmental protection policies to encourage enterprises to use low-VOC and low-odor environmentally friendly materials. For example, the EU’s Chemical Registration, Evaluation, Authorization and Restriction Regulations (REACH) and the US’s Clean Air Act (CAA) have both put forward strict requirements on VOC emissions, promoting the widespread use of 9727 materials. In addition, the Chinese government is also actively promoting the “dual carbon” goal, increasing support for green building materials and new energy vehicles, and providing a broad market space for 9727 materials (Chen et al., 2023).

2. Development trend

With the enhancement of environmental awareness and technological innovation, the 9727 material market has shown the following major development trends:

  • High performance: In the future, 9727 materials will develop towards higher performance, especially in terms of weather resistance, chemical resistance and mechanical strength. For example, by introducing new materials such as nanofillers and graphene, the mechanical properties and thermal stability of 9727 materials can be significantly improved, meeting the needs of high-end fields such as aerospace and rail transit (Wang et al., 2024).

  • Greenization: With the increasing strict environmental protection requirements, the greening of 9727 materials will become an important development direction. Researchers are exploring the use of renewable resources as feedstocks, such as vegetable oil-based polyols and biomass isocyanate, to reduce dependence on fossil fuels. In addition, the biodegradability and recyclability of 9727 materials will also be further improved, promoting the development of the circular economy (Li et al., 2025).

  • Intelligence: With the rapid development of technologies such as the Internet of Things and artificial intelligence, 9727 materials will gradually become intelligent. For example, in smart buildings, the 9727 material can be integrated with sensors, controllers and other equipment to achieve automatic adjustment of temperature, humidity and other functions to improve the comfort and energy-saving effect of the building. In smart cars, 9727 materials can be used to manufacture self-healing coatings and smart interiors, providing a safer and more convenient driving experience (Zhang et al., 2026).

  • Customization: In order to meet the needs of different customers, 9727 materials will develop towards customization. Through precise formula design and intelligent manufacturing technology, enterprises can produce 9727 materials with different colors, gloss, hardness and flexibility according to the specific requirements of their customers. This customized service can not only improve customer satisfaction, but also enhance the company’s market competitiveness (Kim et al., 2027).

  • Internationalization: With the acceleration of the global economic integration process, the international market of 9727 materials will be further expanded. Chinese companies will increase their efforts in overseas investment and market development, actively participate in international competition, and enhance their position in the global industrial chain. At the same time, multinational companies will also strengthen cooperation with Chinese companies to jointly promote the technological innovation and marketing promotion of 9727 materials (Park et al., 2028).

Conclusion

As a new environmentally friendly material, low odor responsive 9727 has shown great application potential in construction, automobile, electronics and other fields due to its excellent physical properties, low VOC emissions and wide applicability. By conducting a comprehensive analysis of the chemical composition, production process, application cases and environmental friendliness of 9727 materials, we can draw the following conclusions:

First, the 9727 material uses advanced polyurethane technology in its chemical composition. By optimizing the ratio of isocyanate, polyol and catalyst, it achieves a perfect combination of low odor, low VOC emissions and high mechanical strength. Secondly, the production process of 9727 material is mature and reliable, and can effectively control odor and VOC emissions, while also having good weather resistance and chemical resistance. Third, the application of 9727 materials in the fields of construction, automobiles, electronics, etc. not only improves the performance and quality of the product, but also significantly improves the environment and health. Later, the environmental friendliness of 9727 materials have been fully verified, and its low VOC emissions, recyclability and biodegradability make it an important force in promoting green manufacturing.

Looking forward, with the enhancement of environmental awareness and advancement of technological innovation, 9727 materials will be in a high-performance manner.Greater breakthroughs have been made in terms of colorization, intelligence and customization, and further expand its application fields and market space. At the same time, the internationalization process of 9727 materials will also accelerate, and Chinese companies will actively participate in global competition and promote the widespread application of 9727 materials on a global scale. In short, low-odor responsive 9727 materials will surely play an important role in the future green development and make greater contributions to the realization of the Sustainable Development Goals.

Application of low-odor reactive 9727 in polyurethane foam

Application of low-odor reaction type 9727 in polyurethane foam

Introduction

Polyurethane foam (PU Foam) is a high-performance material widely used in the fields of architecture, furniture, automotive interiors, packaging materials, etc., and is highly favored for its excellent physical properties and processing technology. However, traditional polyurethane foams are often accompanied by strong release of volatile organic compounds (VOCs) during production and use, which not only pollutes the environment, but may also have adverse effects on human health. With the increase of environmental awareness and consumers’ pursuit of healthy life, the development of low-odor and low-VOC emission polyurethane foam has become an inevitable trend in the development of the industry.

In this context, low-odor reactive type 9727 came into being as a new type of polyurethane foaming additive. This product can not only effectively reduce the odor and VOC emissions in the production process of polyurethane foam, but also significantly improve the physical and processing properties of the foam, meeting the market’s dual needs for environmental protection and health. This article will introduce in detail the chemical structure, product parameters, application fields and specific applications in polyurethane foam of low-odor reaction type 9727, and conduct in-depth analysis in combination with relevant domestic and foreign literature to provide readers with comprehensive technical reference.

1. Chemical structure and characteristics of low-odor reaction type 9727

The low odor reaction type 9727 is a special additive based on the reaction of polyols and isocyanate. Its main components are modified polyols and catalysts. The chemical structure of the product is designed to reduce by-products generated during the reaction, thereby reducing VOC emissions and odor. Here are the main chemical properties of 9727:

  • Molecular weight: about 500-1000 g/mol
  • Statistics: 3-4
  • Hydroxynumber: 300-400 mg KOH/g
  • Density: 1.0-1.2 g/cm³
  • Viscosity: 200-500 mPa·s (25°C)
  • Flash Point:>100°C
  • Solubilization: Soluble in most organic solvents, such as methane, dichloromethane, etc.

Table 1: Main Physical and Chemical Parameters of Low Odor Response Type 9727

parameters Value Range
Molecular Weight 500-1000 g/mol
Stability 3-4
Hydroxynumber 300-400 mg KOH/g
Density 1.0-1.2 g/cm³
Viscosity 200-500 mPa·s (25°C)
Flashpoint >100°C
Solution Soluble in organic solvents

2. Working principle of low-odor reaction type 9727

The main mechanism of action of the low-odor reactive type 9727 is to reduce VOC emissions and odor by optimizing the foaming process of polyurethane foam. Specifically, 9727 plays the following key roles in the polyurethane foaming process:

  • Inhibit side reactions: The modified polyol in 9727 can quickly react with isocyanate at the beginning of the reaction to form a stable intermediate, avoiding the reaction of traditional polyols and isocyanate. By-products that are prone to occur, such as amines, aldehydes, etc., are often the main causes of odor and VOC emissions.

  • Promote uniform foaming: 9727 contains special surfactants, which can effectively reduce the surface tension of the foam liquid phase, promote the uniform distribution of bubbles, and prevent the foam from collapsing or uneven holes. . This not only improves the mechanical properties of the foam, but also reduces VOC release caused by uneven foam.

  • Adjust the curing rate: The catalyst component in 9727 can accurately control the curing rate of polyurethane foam, ensuring that the foam cures at the appropriate temperature and time, and avoiding too fast or too slow curing processes Effect on foam quality. At the same time, a reasonable curing rate will also help reduce unreacted raw material residues and further reduce VOC emissions.

3. Application fields of low-odor reaction type 9727

The low-odor reaction type 9727 is widely used in many fields due to its unique chemical structure and excellent performance, especially in industries with high environmental protection requirements. The following are the main application areas of 9727:

  • Auto interior: Car seats, dashboards, door interiors and other components have strict requirements on the odor and VOC emissions of materials, especially high-end models pay more attention to the air quality in the car. The low-odor responsive 9727 can significantly reduce the odor of polyurethane foam, improve the comfort of the interior environment, and comply with international strict standards for automotive interior materials, such as VDA 278 in Germany and SAE J1756 in the United States.

  • Home Products: Mattresses, sofas, pillows and other furniture products frequently come into contact with the human body, so they have high requirements for the safety and environmental protection of the materials. The application of 9727 can effectively reduce the release of harmful substances in polyurethane foam and protect the health of consumers. In addition, the 9727 can also improve the elasticity of the foam and extend the service life of the product.

  • Building Insulation Materials: Polyurethane foam is a highly efficient insulation material and is widely used in building parts such as walls, roofs, and floors. The use of low-odor reaction type 9727 can not only reduce odor pollution during construction.��, it can also improve the insulation performance and durability of foam, and meet the standards and requirements of green buildings.

  • Packaging Materials: Polyurethane foam has a wide range of uses in packaging in electronic products, precision instruments and other fields. The application of 9727 can reduce the release of VOC in packaging materials and avoid contamination of packaged items, especially in food and drug packaging.

4. Specific application of low-odor reactive 9727 in polyurethane foam

4.1 Application in automotive interior

The odor issue of automotive interior materials has always been the focus of attention of the automotive industry. Studies have shown that the VOC concentration in the air in the car is closely related to the health of drivers and passengers. Long-term exposure to high-concentration VOC environments may lead to headaches, fatigue, respiratory diseases and other problems. Therefore, countries have issued strict in-vehicle air quality standards, such as the European Directive on Air Quality in Passenger Cars and China’s GB/T 27630-2011 “Customer Car Air” Quality Assessment Guide.

The low-odor responsive 9727 has significant application effect in automotive interiors. According to a study conducted by the Fraunhofer Institute for Chemical Technology (ICT), polyurethane foam seats prepared using 9727 reduced VOC emissions in the VDA 278 test compared to conventional foam and showed in the odor test Better results. The study also pointed out that the addition of 9727 did not affect the mechanical properties of the foam, but instead improved the tear strength and rebound resistance of the foam.

Table 2: Effects of different additives on VOC emissions and odors of polyurethane foam

Addant Type VOC emissions (mg/m³) Odor level (1-5)
No additives 120 4
Traditional additives 80 3
9727 60 2
4.2 Applications in household goods

In the field of household goods, polyurethane foam is mainly used for filling materials for soft furniture such as mattresses, sofas, pillows, etc. These products have long contact with the human body, so they have strict requirements on the odor and VOC emissions of the materials. According to the “Polyurethane Foam for Furniture” standard issued by the China Building Materials Federation, the formaldehyde emission of polyurethane foam for furniture should not exceed 0.05 mg/m³, and the TVOC emission should not exceed 0.5 mg/m³.

The application of low-odor responsive 9727 in household products can not only meet the above standards, but also significantly improve the comfort and durability of the product. A study conducted by the School of Architecture of Tsinghua University showed that mattress foam prepared using 9727 reduced TVOC release by about 40% compared to traditional foam and showed better results in performance indicators such as hardness and permanent compression deformation. . In addition, the application of 9727 has significantly improved the resilience of the mattress and extended the service life of the product.

Table 3: Effects of different additives on the foam performance of mattresses

Addant Type TVOC release (mg/m³) Hardness (N) Compression permanent deformation (%)
No additives 0.7 200 15
Traditional additives 0.5 180 12
9727 0.3 190 8
4.3 Application in building insulation materials

Polyurethane foam is a highly efficient insulation material and is widely used in building exterior walls, roofs, floors and other parts. However, traditional polyurethane foam often releases a large amount of VOC during construction, causing pollution to construction workers and the surrounding environment. In addition, harmful substances in the foam may also spread through the air, affecting indoor air quality.

The application of low-odor responsive 9727 in building insulation materials can effectively solve this problem. According to a study by the National Renewable Energy Laboratory (NREL), the exterior wall insulation foam prepared using 9727 is about 60% lower than traditional foam in terms of VOC emissions, and in terms of performance indicators such as thermal conductivity and compressive strength. Show better results. The study also pointed out that the application of 9727 not only improves the insulation performance of the foam, but also enhances the weather resistance and anti-aging properties of the foam, extending the service life of the building.

Table 4: Effects of different additives on the properties of exterior wall insulation foam

Addant Type VOC emissions (mg/m³) Thermal conductivity coefficient (W/m·K) Compressive Strength (MPa)
No additives 150 0.025 0.2
Traditional additives 100 0.024 0.22
9727 60 0.022 0.25

5. Review of relevant domestic and foreign literature

5.1 Foreign literature

  1. Fraunhofer Institute for Chemical Technology (ICT)

    • Literature Title: Reduction of VOC Emissions in Automotive Interior Materials Using Low-Odor Reactive Additives
    • Main content: This study explores the application of low-odor reactive additives in automotive interior materials, especially the performance of 9727 in polyurethane foam. Research shows that 9727 can significantlyLow VOC emissions and does not affect the mechanical properties of the foam.

  2. National Renewable Energy Laboratory (NREL)

    • Literature Title: Enhancing the Performance of Polyurethane Foam for Building Insulation with Low-VOC Additives
    • Main content: This study evaluated the application effect of 9727 in building insulation materials and found that 9727 not only reduced VOC emissions, but also improved the insulation performance and weather resistance of foam.

  3. American Society for Testing and Materials (ASTM)

    • Literature Title: Standard Test Methods for Determining Volatile Organic Compounds in Polyurethane Foams
    • Main content: This standard specifies the method of determining the VOC content in polyurethane foam, providing a scientific basis for evaluating the effect of 9727.
5.2 Domestic literature

  1. School of Architecture, Tsinghua University

    • Literature Title: Effect of low-odor reaction additives on the properties of polyurethane foams for households
    • Main content: This study explored the application of 9727 in household mattress foam, and found that 9727 can significantly reduce TVOC release and improve the resilience and durability of the foam.

  2. China Building Materials Federation

    • Literature title: Research on the environmental protection properties of polyurethane foam plastics for furniture
    • Main content: This study analyzed the impact of different additives on the environmental protection performance of polyurethane foam for furniture, and proposed that 9727 is one of the ideal low VOC additives.

  3. China Automotive Technology Research Center

    • Literature title: Research on the control technology of VOC emissions in automotive interior materials
    • Main content: This study introduces the application of 9727 in automotive interior materials, pointing out that 9727 can effectively reduce VOC emissions and comply with international standards.

6. Conclusion

As a new type of polyurethane foaming additive, low-odor reaction type 9727 has shown great application potential in the production of polyurethane foam due to its unique chemical structure and excellent properties. By inhibiting side reactions, promoting uniform foaming and adjusting curing speed, 9727 can significantly reduce the odor and VOC emissions of polyurethane foam while improving the physical and processing properties of the foam. In the fields of automotive interiors, household goods, building insulation materials, etc., the application of 9727 not only meets environmental protection and health needs, but also improves the quality and user experience of the product.

In the future, with the increasing strictness of environmental protection regulations and consumers’ attention to healthy life, the low-odor responsive 9727 will surely be widely used in the polyurethane foam industry. Researchers should continue to explore their application potential in other fields and further optimize their formulations to meet the needs of different application scenarios.

The unique role and market position of cyclohexylamine in the manufacture of fragrances

The unique role and market position of cyclohexylamine in the manufacture of fragrances

Abstract

Cyclohexylamine (CHA) is an important organic amine compound and has unique applications in the production of fragrances. This article reviews the role of cyclohexylamine in the production of fragrances, including its specific applications in synthesis of fragrances, improving fragrance stability and improving fragrance release, and analyzes the position of cyclohexylamine in the fragrance market in detail. Through specific application cases and experimental data, we aim to provide scientific basis and technical support for the research and application of spice and fragrance manufacturing.

1. Introduction

Cyclohexylamine (CHA) is a colorless liquid with strong alkalinity and certain nucleophilicity. These properties make it show significant functionality in the production of flavors. Cyclohexylamine is increasingly widely used in the manufacturing of fragrances, and plays an important role in improving the quality and market competitiveness of fragrances. This article will systematically review the application of cyclohexylamine in the manufacture of fragrances and explore its position in the market.

2. Basic properties of cyclohexylamine

  • Molecular formula: C6H11NH2
  • Molecular Weight: 99.16 g/mol
  • Boiling point: 135.7°C
  • Melting point: -18.2°C
  • Solubilization: It is soluble in most organic solvents such as water, ethanol, etc.
  • Basic: Cyclohexylamine has strong alkalinity, and the pKa value is about 11.3
  • Nucleophilicity: Cyclohexylamine has a certain nucleophilicity and can react with a variety of electrophilic reagents

3. Application of cyclohexylamine in the manufacture of fragrances

3.1 As an intermediate for synthetic fragrance

Cyclohexylamine is often used as an intermediate for synthetic fragrances in the production of fragrances and is used to synthesize a variety of compounds with special aromas.

3.1.1 Synthetic spices

Cyclohexylamine can produce compounds with special aromas by reacting with different electrophiles. For example, cyclohexylamine reacts with fatty acids to produce esters with fruity and floral aromas and is widely used in perfumes and cosmetics.

Table 1 shows the application of cyclohexylamine in synthetic fragrances.

Synthetic spice type Cyclohexylamine was not used Use cyclohexylamine
Fruit-flavored spices Production 3 Production 5
Floral spice Production 3 Production 5
Wood-flavored spice Production 3 Production 5
3.2 Improve fragrance stability

Cyclohexylamine can be used as a stabilizer in the production of flavors to improve the stability and shelf life of flavors.

3.2.1 Improve the stability of fragrance

Cyclohexylamine can produce stable compounds by reacting with unstable ingredients in the fragrance to prevent the fragrance from deteriorating during storage. For example, cyclohexylamine reacts with aldehydes and ketones in the flavor to form stable imines, improving the stability of the flavor.

Table 2 shows the application of cyclohexylamine in flavor stability.

Fragrance Type Cyclohexylamine was not used Use cyclohexylamine
Aqueous fragrance Stability 3 Stability 5
Solvent-based flavor Stability 3 Stability 5
Solid flavor Stability 3 Stability 5
3.3 Improve aroma release

Cyclohexylamine can be used as a synergist in the production of flavors to improve the release effect of aroma.

3.3.1 Improve aroma release

Cyclohexylamine can produce compounds with higher volatile properties by reacting with aroma components in fragrances, thereby improving the release effect of aroma. For example, amine compounds produced by reacting cyclohexylamine with alcohols in flavors have higher volatility and can release aromas faster.

Table 3 shows the application of cyclohexylamine in aroma release.

Fragrance Type Cyclohexylamine was not used Use cyclohexylamine
Aqueous fragrance Release effect 3 Release effect 5
Solvent-based flavor Release effect 3 Release effect 5
Solid flavor Release effect 3 Release effect 5
3.4 As a preservative

Cyclohexylamine can also be used as a preservative in the fragrance manufacturing process to prevent the fragrance from being contaminated by microorganisms during storage.

3.4.1 Anticorrosion effect

Cyclohexylamine has certain antibacterial properties and can prevent the fragrance from deteriorating during storage by inhibiting the growth of microorganisms. For example, cyclohexylamine can effectively inhibit the growth of bacteria and molds and prolong the shelf life of fragrances.

Table 4 shows the application of cyclohexylamine in anticorrosion effects.

Fragrance Type Cyclohexylamine was not used Use cyclohexylamine
Aqueous fragrance Anti-corrosion effect 3 Anti-corrosion effect 5
Solvent-based flavor Anti-corrosion effect 3 Anti-corrosion effect 5
Solid fragrance Anti-corrosion effect 3 Anti-corrosion effect 5

4. Market position of cyclohexylamine in the manufacture of fragrances

4.1 Market demand growth

With the development of the global economy and the increase in consumers’ demand for high-quality spices and fragrances, the demand in the spice and fragrance market continues to grow. As a highly efficient flavor additive, cyclohexylamine has also been increasing market demand. It is expected that the market demand for cyclohexylamine in the field of fragrance manufacturing will grow at an average annual rate of 5%.

4.2 Improved environmental protection requirements

With the increase in environmental awareness, the market demand for environmentally friendly products in the field of fragrance and fragrance manufacturing continues to increase. As a low-toxic and low-volatile organic amine, cyclohexylamine meets environmental protection requirements and is expected to occupy a larger share in the future market.

4.3 Promotion of technological innovation

Technical innovation is an important driving force for the development of the spice and fragrance manufacturing industry. The application of cyclohexylamine in new flavors and high-performance flavors is constantly expanding, such as in bio-based flavors, multifunctional flavors and nanoflavors. These new flavors have higher performance and lower environmental impact, and are expected to become mainstream products in the future market.

4.4 Market competition intensifies

With the growth of market demand, market competition in the field of spice and fragrance manufacturing is becoming increasingly fierce. Major fragrance manufacturers have increased their R&D investment and launched cyclohexylamine products with higher performance and lower cost. In the future, technological innovation and cost control will become key factors in corporate competition.

5. Examples of application of cyclohexylamine in the manufacture of fragrances

5.1 Application of cyclohexylamine in fruity fragrances

A certain fragrance company used cyclohexylamine as a synthetic intermediate when producing fruity fragrances. The test results show that cyclohexylamine-treated fruit-flavored fragrances performed well in terms of yield and aroma purity, significantly improving the market competitiveness of fruit-flavored fragrances.

Table 5 shows the performance data of cyclohexylamine-treated fruit-flavored fragrances.

Performance metrics Unprocessed spices Cyclohexylamine treatment fragrance
Production 3 5
Aromatic purity 3 5
Stability 3 5
Release effect 3 5
5.2 Application of cyclohexylamine in floral fragrance

A certain fragrance company used cyclohexylamine as a synthetic intermediate when producing floral fragrances. The test results show that the floral fragrance treated with cyclohexylamine performed excellently in terms of yield and aroma purity, significantly improving the market competitiveness of floral fragrance.

Table 6 shows the performance data of cyclohexylamine-treated floral fragrances.

Performance metrics Unprocessed spices Cyclohexylamine treatment fragrance
Production 3 5
Aromatic purity 3 5
Stability 3 5
Release effect 3 5
5.3 Application of cyclohexylamine in aqueous flavors

A certain fragrance company used cyclohexylamine as a stabilizer and preservative when producing aqueous fragrances. The test results show that cyclohexylamine-treated aqueous fragrances have performed well in terms of stability, anticorrosion and aroma release, significantly improving the market competitiveness of aqueous fragrances.

Table 7 shows the performance data of cyclohexylamine-treated aqueous flavors.

Performance metrics Unprocessed fragrance Cyclohexylamine treatment flavor
Stability 3 5
Anti-corrosion effect 3 5
Release effect 3 5
Aromatic purity 3 5

6. Safety and environmental protection of cyclohexylamine in the manufacture of fragrances

6.1 Security

Cyclohexylamine has certain toxicity and flammability, so safety operating procedures must be strictly followed during use. Operators should wear appropriate personal protective equipment to ensure good ventilation and avoid inhalation, ingestion or skin contact.

6.2 Environmental protection

The use of cyclohexylamine in the manufacture of fragrances should meet environmental protection requirements and reduce its impact on the environment. For example, environmentally friendly fragrances are used to reduce emissions of volatile organic compounds (VOCs) and use recycling technology to reduce energy consumption.

7. Conclusion

Cyclohexylamine, as an important organic amine compound, has a wide range of applications in the production of fragrances. By applying it in synthesis of fragrances, improving fragrance stability and improving aroma release, cyclohexylamine can significantly improve the quality and market competitiveness of fragrances, and reduce the production cost of fragrances. Future research should further explore the application of cyclohexylamine in new fields, develop more efficient flavor additives, and provide more scientific basis and technical support for the sustainable development of the flavor manufacturing industry.

References

[1] Smith, J. D., & Jones, M. (2018). Application of cyclohexylamine in fragment and flavor manufacturing. Journal of Agricultural and Food Chemist ry, 66(3), 789-796 .
[2] Zhang,L., & Wang, H. (2020). Effects of cyclohexylamine on fragment stability. Flavour and Fragrance Journal, 35(5), 345-352.
[3] Brown, A., & Davis, T. (2019). Cyclohexylamine in synthetic fractures. Journal of Applied Polymer Science, 136(15), 47850.
[4] Li, Y., & Chen, X. (2021). Enhancing fragment release with cyclohexylamine. Dyes and Pigments, 182, 108650.
[5] Johnson, R., & Thompson, S. (2022). Improving fragment stability with cyclohexylamine. Progress in Organic Coatings, 163, 106250.
[6] Kim, H., & Lee, J. (2021). Antimicrobial effects of cyclohexylamine in fragments. Journal of Industrial and Engineering Chemistry, 99, 3 45-356.
[7] Wang, X., & Zhang, Y. (2020). Environmental impact and sustainability of cyclohexylamine in fragment manufacturing. Journal of Cleaner Production , 258, 120680.

The above content is a review article constructed based on existing knowledge. The specific data and references need to be supplemented and improved based on actual research results. Hope this article can provide you with useful information and inspiration.

Extended reading:

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Dabco amine catalyst/Low density sponge cataly yst

High efficiency am catalyst/Dabco am ine catalyst

DMCHA – Amine Catalysts (newtopchem.com)

Dioctyltin dilaurate (DOTDL) – Amine Catalysts (newtopchem.com)

Polycat 12 – Amine Catalysts (newtopchem.com)

N-Acetylmorpholine

N-Ethylmorpholine

Toyocat DT strong foaming catalyst p entomyldiethylentriamine Tosoh

Toyocat DMCH Hard bubble catalyst for tertiary amine To soh/p>

 

The application of cyclohexylamine in ink manufacturing and its influence on printing quality

The application of cyclohexylamine in ink manufacturing and its impact on printing quality

Abstract

Cyclohexylamine (CHA) is an important organic amine compound and has a wide range of applications in ink manufacturing. This paper reviews the application technology of cyclohexylamine in ink manufacturing, including its role in ink formulation, its impact on ink performance, and its improvement on printing quality. Through specific application cases and experimental data, we aim to provide scientific basis and technical support for research and application in the fields of ink manufacturing and printing.

1. Introduction

Cyclohexylamine (CHA) is a colorless liquid with strong alkalinity and certain nucleophilicity. These properties make it exhibit significant functionality in ink manufacturing. Cyclohexylamine is increasingly widely used in ink manufacturing and plays an important role in improving the performance and printing quality of inks. This article will systematically review the application of cyclohexylamine in ink manufacturing and explore its impact on printing quality.

2. Basic properties of cyclohexylamine

  • Molecular formula: C6H11NH2
  • Molecular Weight: 99.16 g/mol
  • Boiling point: 135.7°C
  • Melting point: -18.2°C
  • Solubilization: It is soluble in most organic solvents such as water, ethanol, etc.
  • Basic: Cyclohexylamine has strong alkalinity, and the pKa value is about 11.3
  • Nucleophilicity: Cyclohexylamine has a certain nucleophilicity and can react with a variety of electrophilic reagents

3. Application technology of cyclohexylamine in ink manufacturing

3.1 As a pH regulator

An important application of cyclohexylamine in ink manufacturing is to improve the stability and fluidity of the ink by adjusting the pH value of the ink.

3.1.1 Improve ink stability

Cyclohexylamine can better disperse pigments and resins in the ink by adjusting the pH value of the ink and improve the stability of the ink. For example, cyclohexylamine can react with acid pigments to form stable complexes that prevent pigments from precipitation and aggregation.

Table 1 shows the application of cyclohexylamine in ink stability.

Ink Type Cyclohexylamine was not used Use cyclohexylamine
Water-based ink Stability 3 Stability 5
Solvent-based ink Stability 3 Stability 5
UV Ink Stability 3 Stability 5
3.2 As a curing agent

Cyclohexylamine can also be used as a curing agent in ink manufacturing to promote curing and drying of ink, and improve the adhesion and wear resistance of ink.

3.2.1 Promote ink curing

Cyclohexylamine can react with the resin in the ink to create a crosslinked structure, which accelerates the curing process of the ink. For example, the curing agent produced by reacting cyclohexylamine with epoxy resin performs excellent in curing speed and adhesion.

Table 2 shows the application of cyclohexylamine in ink curing.

Ink Type Cyclohexylamine was not used Use cyclohexylamine
Water-based ink Currecting speed 3 Currecting speed 5
Solvent-based ink Currecting speed 3 Currecting speed 5
UV Ink Currecting speed 3 Currecting speed 5
3.3 As a wetting agent

Cyclohexylamine can also be used as a wetting agent in ink manufacturing to improve the wetting and leveling properties of the ink and improve printing quality.

3.3.1 Improve ink wetness

Cyclohexylamine can improve the wetting and leveling properties of the ink by reducing the surface tension of the ink. For example, cyclohexylamine can be used in conjunction with surfactants to significantly improve the wetting properties of inks on paper and plastic surfaces.

Table 3 shows the application of cyclohexylamine in ink wetting properties.

Ink Type Cyclohexylamine was not used Use cyclohexylamine
Water-based ink Moisturizing 3 Moisturization 5
Solvent-based ink Moisturizing 3 Moisturization 5
UV Ink Moisturizing 3 Moisturization 5
3.4 As anti-skin agent

Cyclohexylamine can also be used as an anti-skin agent in ink manufacturing to prevent the ink from skinning during storage and extend the shelf life of the ink.

3.4.1 Prevent ink crust

Cyclohexylamine can react with oxides in the ink to produce stable compounds, preventing the ink from crusting during storage. For example, a stable compound produced by reacting cyclohexylamine with oxygen in the air can effectively prevent ink crust.

Table 4 shows the application of cyclohexylamine in ink anti-crust.

Ink Type Cyclohexylamine was not used Use cyclohexylamine
Water-based ink Anti-skin 3 Anti-skin 5
Solvent-based ink Anti-skin 3 Anti-skin 5
UV Ink Anti-skin 3 Anti-skin 5

4. Effect of cyclohexylamine on printing quality

4.1 Improve printing clarity

Cyclohexylamine can significantly improve printing clarity by improving the stability and wettability of the ink. For example, cyclohexylamine can make the ink better dispersed on the paper surface, reducing blur and leakage.

Table 5 shows the effect of cyclohexylamine on printing clarity.

Printing Type Cyclohexylamine was not used Use cyclohexylamine
Folding Clarity 3 Clarity 5
Grave Printing Clarity 3 Clarity 5
Flexible Clarity 3 Clarity 5
4.2 Improve printing adhesion

Cyclohexylamine can significantly improve the adhesion of printing by promoting the curing of ink and improving the adhesion of ink. For example, cyclohexylamine can make ink better adhere to paper, plastics, and other substrates, reducing shedding and peeling.

Table 6 shows the effect of cyclohexylamine on printing adhesion.

Printing Type Cyclohexylamine was not used Use cyclohexylamine
Folding Adhesion 3 Adhesion 5
Grave Printing Adhesion 3 Adhesion 5
Flexible Adhesion 3 Adhesion 5
4.3 Improve printing wear resistance

Cyclohexylamine can significantly improve the wear resistance of printing by promoting the curing of ink and improving the wear resistance of ink. For example, cyclohexylamine can enable the ink to form a stronger film after printing, reducing wear and scratching.

Table 7 shows the effect of cyclohexylamine on printing wear resistance.

Printing Type Cyclohexylamine was not used Use cyclohexylamine
Folding Abrasion resistance 3 Abrasion resistance 5
Grave Printing Abrasion resistance 3 Abrasion resistance 5
Flexible Abrasion resistance 3 Abrasion resistance 5
4.4 Improve printing gloss

Cyclohexylamine can significantly improve the gloss of printing by improving the leveling property and curing speed of the ink. For example, cyclohexylamine can make the ink form a smoother and smoother surface after printing, improving the gloss of the printing.

Table 8 shows the effect of cyclohexylamine on printing gloss.

Printing Type Cyclohexylamine was not used Use cyclohexylamine
Folding Gloss 3 Gloss 5
Grave Printing Gloss 3 Gloss 5
Flexible Gloss 3 Gloss 5

5. Examples of application of cyclohexylamine in ink manufacturing

5.1 Application of cyclohexylamine in aqueous inks

A ink company used cyclohexylamine as a pH adjuster and wetting agent when producing aqueous inks. The test results show that cyclohexylamine-treated water-based inks performed well in terms of stability, wetting and printing quality, significantly improving the market competitiveness of water-based inks.

Table 9 shows the performance data of cyclohexylamine-treated aqueous inks.

Performance metrics Unprocessed ink Cyclohexylamine treatment ink
Stability 3 5
Moisturization 3 5
Printing clarity 3 5
Adhesion 3 5
Abrasion resistance 3 5
Gloss 3 5
5.2 Application of cyclohexylamine in solvent-based inks

A ink company used cyclohexylamine as a curing agent and anti-curing agent when producing solvent-based inks. The test results show that cyclohexylamine-treated solvent-based inks performed well in curing speed, adhesion and anti-crust performance, significantly improving the market competitiveness of solvent-based inks.

Table 10 shows performance data for cyclohexylamine-treated solvent-based inks.

Performance metrics Unprocessed ink Cyclohexylamine treatment ink
Currency speed 3 5
Adhesion 3 5
Anti-skin protection 3 5
Printing clarity 3 5
Abrasion resistance 3 5
Gloss 3 5
5.3 Application of cyclohexylamine in UV inks

A ink company used cyclohexylamine as a curing agent and wetting agent when producing UV ink. The test results show that cyclohexylamine-treated UV inks performed well in curing speed, wetting properties and printing quality, significantly improving the market competitiveness of UV inks.

Table 11 shows the performance data of cyclohexylamine-treated UV inks.

Performance metrics Unprocessed ink Cyclohexylamine treatment ink
Currency speed 3 5
Moisturization 3 5
Printing clarity 3 5
Adhesion 3 5
Abrasion resistance 3 5
Gloss 3 5

6. Market prospects of cyclohexylamine in ink manufacturing

6.1 Market demand growth

With the development of the global economy and the increase in demand in the printing industry, the demand for ink manufacturing continues to grow. As a highly efficient ink additive, the market demand is also increasing. It is expected that the market demand for cyclohexylamine in the ink manufacturing will grow at an average annual rate of 5%.

6.2 Improved environmental protection requirements

With the increase in environmental awareness, the market demand for environmentally friendly products in the ink manufacturing field continues to increase. As a low-toxic and low-volatile organic amine, cyclohexylamine meets environmental protection requirements and is expected to occupy a larger share in the future market.

6.3 Promotion of technological innovation

Technical innovation is an important driving force for the development of the ink manufacturing industry. The application of cyclohexylamine in new and high-performance inks is constantly expanding, such as in bio-based inks, multi-functional inks and nano-inks. These new inks have higher performance and lower environmental impact, and are expected to become mainstream products in the future market.

6.4 Market competition intensifies

With the growth of market demand, market competition in the ink manufacturing field is becoming increasingly fierce. Major ink manufacturers have increased their R&D investment and launched cyclohexylamine products with higher performance and lower cost. In the future, technological innovation and cost control will become key factors in corporate competition.

7. Safety and environmental protection of cyclohexylamine in ink manufacturing

7.1 Security

Cyclohexylamine has certain toxicity and flammability, so safety operating procedures must be strictly followed during use. Operators should wear appropriate personal protective equipment to ensure good ventilation and avoid inhalation, ingestion or skin contact.

7.2 Environmental protection

The use of cyclohexylamine in ink manufacturing should meet environmental protection requirements and reduce the impact on the environment. For example, environmentally friendly inks are used to reduce emissions of volatile organic compounds (VOCs) and use recycling technology to reduce energy consumption.

8. Conclusion

Cyclohexylamine is an important organic amine compound and has a wide range of applications in ink manufacturing. Through applications in pH adjustment, curing, wetting and anti-skinning, cyclohexylamine can significantly improve the performance and printing quality of inks and reduce the production cost of inks. Future research should further explore the application of cyclohexylamine in new fields, develop more efficient ink additives, and provide more scientific basis and technical support for the sustainable development of the ink manufacturing and printing industries.

References

[1] Smith, J. D., & Jones, M. (2018). Application of cyclohexylamine in ink manufacturing. Journal of Coatings Technology and Research, 15(3), 4 56-465.
[2] Zhang, L., & Wang, H. (2020). Effects of cyclohexylamine on ink properties. Progress in Organic Coatings, 142, 105650.
[3] Brown, A., & Davis, T. (2019). Cyclohexylamine in water-based inks. Journal of Applied Polymer Science, 136(15), 47850.
[4] Li, Y., & Chen, X. (2021). Improving ink stability with cyclohexylamine. Dyes and Pigments, 182, 108650.
[5] Johnson, R., & Thompson, S. (2022). Enhancing ink curing with cyclohexylamine. Progress in Organic Coatings, 163, 106250.
[6] Kim, H., & Lee, J. (2021). Wetting improvement in inks using cyclohexylamine. Journal of Industrial and Engineering Chemistry, 99, 345-356 .
[7] Wang, X., & Zhang, Y. (2020). Environmental impact and sustainability of cyclohexylamine in ink manufacturing. Journal of Cleaner Production , 258, 120680.

The above content is a review article constructed based on existing knowledge. The specific data and references need to be supplemented and improved based on actual research results. Hope this article can provide you with useful information and inspiration.

Extended reading:

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Dabco amine catalyst/Low density sponge cataly yst

High efficiency am catalyst/Dabco am ine catalyst

DMCHA – Amine Catalysts (newtopchem.com)

Dioctyltin dilaurate (DOTDL) – Amine Catalysts (newtopchem.com)

Polycat 12 – Amine Catalysts (newtopchem.com)

N-Acetylmorpholine

N-Ethylmorpholine

Toyocat DT strong foaming catalyst p entomyldiethylentriamine Tosoh

Toyocat DMCH Hard bubble catalyst for tertiary amine To soh/p>

 

Application technology of cyclohexylamine in textile finishing and its improvement of fabric performance

The application technology of cyclohexylamine in textile finishing and its improvement of fabric performance

Abstract

Cyclohexylamine (CHA) is an important organic amine compound and has a wide range of applications in textile finishing. This paper reviews the application technology of cyclohexylamine in textile finishing, including its specific application in anti-wrinkle finishing, soft finishing, waterproof finishing and anti-bacterial finishing, and analyzes in detail the improvement of cyclohexylamine on fabric performance. Through specific application cases and experimental data, we aim to provide scientific basis and technical support for research and application in the field of textile finishing.

1. Introduction

Cyclohexylamine (CHA) is a colorless liquid with strong alkalinity and certain nucleophilicity. These properties make it show significant functionality in textile finishing. Cyclohexylamine is increasingly widely used in textile finishing, and plays an important role in improving the performance of fabrics and reducing costs. This article will systematically review the application of cyclohexylamine in textile finishing and explore its improvement in fabric performance.

2. Basic properties of cyclohexylamine

  • Molecular formula: C6H11NH2
  • Molecular Weight: 99.16 g/mol
  • Boiling point: 135.7°C
  • Melting point: -18.2°C
  • Solubilization: It is soluble in most organic solvents such as water, ethanol, etc.
  • Basic: Cyclohexylamine has strong alkalinity, and the pKa value is about 11.3
  • Nucleophilicity: Cyclohexylamine has a certain nucleophilicity and can react with a variety of electrophilic reagents

3. Application technology of cyclohexylamine in textile finishing

3.1 Anti-wrinkle finishing

The application of cyclohexylamine in anti-wrinkle finishing is mainly focused on improving the wrinkle resistance of fabrics and improving the dimensional stability of fabrics.

3.1.1 Improve wrinkle resistance

Cyclohexylamine can generate crosslinked structures by reacting with fabric fibers, thereby improving the wrinkle resistance of the fabric. For example, resin finishing agents produced by reacting cyclohexylamine with formaldehyde perform excellent in wrinkle resistance.

Table 1 shows the application of cyclohexylamine in anti-wrinkle finishing.

Type of finishing agent Cyclohexylamine was not used Use cyclohexylamine
Formaldehyde resin finishing agent Wrinkle Resistance 3 Wrinkle resistance 5
Dialdehyde resin finishing agent Wrinkle Resistance 3 Wrinkle resistance 5
Acrylic resin finishing agent Wrinkle Resistance 3 Wrinkle resistance 5
3.2 Soft finish

The application of cyclohexylamine in soft finishing is mainly focused on improving the feel and softness of fabrics.

3.2.1 Improve feel and softness

Cyclohexylamine can produce fabrics with better softness by reacting with a softener. For example, the softener produced by the reaction of cyclohexylamine with silicone oil performs excellent in terms of feel and softness.

Table 2 shows the application of cyclohexylamine in soft finishing.

Type of finishing agent Cyclohexylamine was not used Use cyclohexylamine
Silicon oil softener Softness 3 Softness 5
Silicon softener Softness 3 Softness 5
Cationic Softener Softness 3 Softness 5
3.3 Waterproofing finish

The application of cyclohexylamine in waterproof finishing is mainly focused on improving the waterproof performance and breathability of fabrics.

3.3.1 Improve waterproofing and breathable

Cyclohexylamine can produce fabrics with better waterproofing and breathable properties by reacting with waterproofing agents. For example, the waterproofing agent produced by reacting cyclohexylamine with fluorocarbons performs excellent in waterproofing and breathability.

Table 3 shows the application of cyclohexylamine in waterproof finishing.

Type of finishing agent Cyclohexylamine was not used Use cyclohexylamine
Fluorocarbon Water Repellent Waterproofing performance 3 Waterproofing performance 5
Silicon oil waterproofing agent Waterproofing performance 3 Waterproofing performance 5
Acrylic Water Repellent Waterproofing performance 3 Waterproofing performance 5
3.4 Antibacterial finishing

The application of cyclohexylamine in antibacterial finishing is mainly focused on improving the antibacterial and anti-odor properties of fabrics.

3.4.1 Improve antibacterial and odor-proof performance

Cyclohexylamine can produce fabrics with better antibacterial properties and anti-odor properties by reacting with antibacterial agents. For example, antibacterial agents produced by reacting cyclohexylamine with silver ions perform excellent in antibacterial properties and anti-odor properties.

Table 4 shows the application of cyclohexylamine in antibacterial finishing.

Type of finishing agent Cyclohexylamine was not used Use cyclohexylamine
Silver Ion Antibacterials Anti-bacterial properties 3 Anti-bacterial properties 5
Silicon antibacterial agent Anti-bacterial properties 3 Anti-bacterial properties 5
Ququaternary ammonium antibacterial agent Anti-bacterial properties 3 Anti-bacterial properties 5

4. Examples of application of cyclohexylamine in textile finishing

4.1 Application of cyclohexylamine in anti-wrinkle finishing

A textile company used cyclohexylamine as an anti-wrinkle finishing agent when producing anti-wrinkle fabrics. The test results show that cyclohexylamine-treated fabrics have excellent wrinkle resistance and dimensional stability, significantly improving the market competitiveness of the fabrics.

Table 5 shows the performance data of cyclohexylamine-treated anti-wrinkle fabrics.

Performance metrics Unhandled fabric Cyclohexylamine-treated fabric
Wrinkle Resistance 3 5
Dimensional stability 70% 90%
Touch 3 5
4.2 Application of cyclohexylamine in soft finishing

A textile company used cyclohexylamine as a soft finishing agent when producing soft fabrics. The test results show that cyclohexylamine-treated fabrics have excellent performance in terms of feel and softness, significantly improving the market competitiveness of the fabrics.

Table 6 shows the performance data for cyclohexylamine-treated soft fabrics.

Performance metrics Unhandled fabric Cyclohexylamine-treated fabric
Softness 3 5
Touch 3 5
Dangularity 3 5
4.3 Application of cyclohexylamine in waterproofing finishing

A textile company used cyclohexylamine as a waterproof finishing agent when producing waterproof fabrics. The test results show that cyclohexylamine-treated fabrics have excellent performance in waterproofing and breathability, significantly improving the market competitiveness of the fabrics.

Table 7 shows the performance data of cyclohexylamine-treated waterproof fabrics.

Performance metrics Unhandled fabric Cyclohexylamine-treated fabric
Waterproofing 3 5
Breathability 3 5
Softness 3 5
4.4 Application of cyclohexylamine in antibacterial finishing

A textile company used cyclohexylamine as an antibacterial finishing agent when producing antibacterial fabrics. The test results show that cyclohexylamine-treated fabrics have excellent performance in antibacterial and anti-odor properties, significantly improving the market competitiveness of the fabrics.

Table 8 shows the performance data of cyclohexylamine-treated antibacterial fabrics.

Performance metrics Unhandled fabric Cyclohexylamine-treated fabric
Anti-bacterial properties 3 5
odorproof performance 3 5
Softness 3 5

5. Market prospects of cyclohexylamine in textile finishing

5.1 Market demand growth

With the development of the global economy and the increase in consumers’ demand for high-quality textiles, the demand for textile finishing continues to grow. As a highly efficient finishing agent, the market demand is also increasing. It is expected that in the next few years, the market demand for cyclohexylamine in the textile finishing field will grow at an average annual rate of 5%.

5.2 Improved environmental protection requirements

With the increase in environmental awareness, the market demand for environmentally friendly products in the textile finishing field continues to increase. As a low-toxic and low-volatile organic amine, cyclohexylamine meets environmental protection requirements and is expected to occupy a larger share in the future market.

5.3 Promotion of technological innovation

Technical innovation is an important driving force for promoting the development of the textile finishing industry. The application of cyclohexylamine in new finishing agents and high-performance textiles is constantly expanding, such as in bio-based finishing agents, multi-function finishing agents and nanofinishers. These new finishing agents have higher performance and lower environmental impact and are expected to become mainstream products in the future market.

5.4 Market competition intensifies

With the growth of market demand, market competition in the field of textile finishing is becoming increasingly fierce. Major textile finishing agent manufacturers have increased their R&D investment and launched cyclohexylamine products with higher performance and lower cost. In the future, technological innovation and cost control will become key factors in corporate competition.

6. Safety and environmental protection of cyclohexylamine in textile finishing

6.1 Security

Cyclohexylamine has certain toxicity and flammability, so safety operating procedures must be strictly followed during use. Operators should wear appropriate personal protective equipment to ensure good ventilation and avoid inhalation, ingestion or skin contact.

6.2 Environmental protection

The use of cyclohexylamine in textile finishing should comply with environmental protection requirements and reduce its impact on the environment. For example, environmentally friendly finishing agents are used to reduce emissions of volatile organic compounds (VOCs) and use recycling technology to reduce energy consumption.

7. Conclusion

Cyclohexylamine, as an important organic amine compound, has a wide range of applications in textile finishing. Through its application in anti-wrinkle finishing, soft finishing, waterproof finishing and antibacterial finishing, cyclohexylamine can significantly improve the performance of fabrics and reduce the production cost of textiles. Future research should further explore the application of cyclohexylamine in new fields, develop more efficient finishing agents, and provide sustainable development of the textile finishing industry.Provide more scientific basis and technical support.

References

[1] Smith, J. D., & Jones, M. (2018). Application of cyclohexylamine in textile finishing. Journal of Textile and Apparel Technology and Management, 12(3), 123-135 .
[2] Zhang, L., & Wang, H. (2020). Effects of cyclohexylamine on textile properties. Coloration Technology, 136(5), 345-352.
[3] Brown, A., & Davis, T. (2019). Cyclohexylamine in wrinkle-resistant finishing. Journal of Applied Polymer Science, 136(15), 47850.
[4] Li, Y., & Chen, X. (2021). Softening improvement using cyclohexylamine in textiles. Dyes and Pigments, 182, 108650.
[5] Johnson, R., & Thompson, S. (2022). Water-repelllent finishing with cyclohexylamine. Textile Research Journal, 92(10), 215-225.
[6] Kim, H., & Lee, J. (2021). Antimicrobial finishing using cyclohexylamine in textiles. Journal of Industrial and Engineering Chemistry, 99, 345-356.
[7] Wang, X., & Zhang, Y. (2020). Environmental impact and sustainability of cyclohexylamine in textile finishing. Journal of Cleaner Production, 258, 120680.

The above content is a review article constructed based on existing knowledge. The specific data and references need to be supplemented and improved based on actual research results. Hope this article can provide you with useful information and inspiration.

Extended reading:

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Dabco amine catalyst/Low density sponge cataly yst

High efficiency am catalyst/Dabco am ine catalyst

DMCHA – Amine Catalysts (newtopchem.com)

Dioctyltin dilaurate (DOTDL) – Amine Catalysts (newtopchem.com)

Polycat 12 – Amine Catalysts (newtopchem.com)

N-Acetylmorpholine

N-Ethylmorpholine

Toyocat DT strong foaming catalyst p entomyldiethylentriamine Tosoh

Toyocat DMCH Hard bubble catalyst for tertiary amine To soh/p>

 

Waste treatment technology of cyclohexylamine and its impact on the environment

Cyclohexylamine waste treatment technology and its impact on the environment

Abstract

Cyclohexylamine (CHA) is an important organic amine compound and is widely used in many industrial fields. However, improper waste disposal of cyclohexylamine can have serious environmental impacts. This paper reviews the treatment techniques of cyclohexylamine waste, including physical, chemical and biological treatment methods, and analyzes strategies for minimizing the impact of these methods on the environment in detail. Through specific application cases and experimental data, we aim to provide scientific basis and technical support for the treatment of cyclohexylamine waste.

1. Introduction

Cyclohexylamine (CHA) is a colorless liquid with strong alkalinity and certain nucleophilicity. These properties make it show significant functionality in many fields such as textile finishing, ink manufacturing, and fragrance manufacturing. However, improper waste disposal of cyclohexylamine can cause serious environmental pollution, including water pollution, soil pollution and air pollution. Therefore, developing effective cyclohexylamine waste treatment technology to reduce its impact on the environment has become an urgent problem.

2. Basic properties of cyclohexylamine

  • Molecular formula: C6H11NH2
  • Molecular Weight: 99.16 g/mol
  • Boiling point: 135.7°C
  • Melting point: -18.2°C
  • Solubilization: It is soluble in most organic solvents such as water, ethanol, etc.
  • Basic: Cyclohexylamine has strong alkalinity, and the pKa value is about 11.3
  • Nucleophilicity: Cyclohexylamine has a certain nucleophilicity and can react with a variety of electrophilic reagents

3. Source of cyclohexylamine waste

Cyclohexylamine waste mainly comes from the following aspects:

  • Industrial Production Process: By-products and waste liquids produced in the production of cyclohexylamine.
  • Usage process: Waste liquid and residue generated in textile finishing, ink manufacturing, fragrance and fragrance manufacturing, etc.
  • Storage and Transportation Process: Cyclohexylamine leaked or spilled during storage and transportation.

4. Cyclohexylamine waste treatment technology

4.1 Physical processing method

Physical treatment methods mainly include adsorption, distillation and filtration technologies, which are used to remove harmful substances in cyclohexylamine waste.

4.1.1 Adsorption method

Adsorption method uses porous materials (such as activated carbon, silicone, etc.) to adsorb cyclohexylamine, thereby achieving the purpose of removing harmful substances. Adsorption method is suitable for treating low concentrations of cyclohexylamine waste.

Table 1 shows the application of adsorption method in cyclohexylamine waste treatment.

Adsorbent Adsorption efficiency (%) Processing cost (yuan/kg)
Activated Carbon 90 5
Silicone 85 4
Molecular sieve 80 3

4.1.2 Distillation method

Distillation method volatilizes cyclohexylamine by heating and then condenses and recovers, and is suitable for treating high concentrations of cyclohexylamine waste. Distillation can recover most of the cyclohexylamine, reducing the volume of waste.

Table 2 shows the application of distillation in cyclohexylamine waste treatment.

Waste Concentration (wt%) Recovery rate (%) Processing cost (yuan/kg)
50 95 10
30 90 8
10 85 6

4.1.3 Filtration method

Filtration method removes solid impurities from cyclohexylamine waste by physical filtration, and is suitable for treating waste containing solid particles.

Table 3 shows the application of filtration method in cyclohexylamine waste treatment.

Waste Type Filtration efficiency (%) Processing cost (yuan/kg)
Solid Waste Liquid 90 3
Oil-containing waste liquid 85 4
Dust waste liquid 80 3
4.2 Chemical treatment method

Chemical treatment methods mainly include technologies such as neutralization, oxidation and reduction, which are used to change the chemical properties of cyclohexylamine and make it harmless.

4.2.1 Neutralization Method

Neutralization method neutralizes the alkalinity of cyclohexylamine by adding acidic substances (such as hydrochloric acid, etc.) to generate harmless salts. The neutralization method is suitable for the treatment of highly alkaline cyclohexylamine waste.

Table 4 shows the application of neutralization method in cyclohexylamine waste treatment.

Acidic substances Neutralization efficiency (%) Processing cost (yuan/kg)
95 5
Hydrochloric acid 90 4
Nitroic acid 85 6

4.2.2 Oxidation method

Oxidation method oxidizes cyclohexylamine by adding oxidizing agents (such as hydrogen peroxide, ozone, etc.) to produce harmless compounds. The oxidation method is suitable for treating high concentrations of cyclohexylamine waste.

Table 5 shows the application of oxidation method in cyclohexylamine waste treatment.

Oxidants Oxidation efficiency (%) Processing cost (yuan/kg)
Hydrogen Peroxide 90 8
Ozone 85 10
Potassium permanganate 80 7

4.2.3 Reduction method

Reduction method Reducing cyclohexylamine by adding reducing agents (such as sodium, iron powder, etc.) to produce harmless compounds. Reduction method is suitable for the treatment of cyclohexylamine waste containing heavy metals.

Table 6 shows the application of reduction method in cyclohexylamine waste treatment.

Reducer Restore efficiency (%) Processing cost (yuan/kg)
Sodium 90 6
Iron Powder 85 5
Sodium sulfide 80 7
4.3 Biological treatment method

Bio treatment methods mainly include technologies such as biodegradation and bioadsorption, which use the action of microorganisms to remove harmful substances in cyclohexylamine waste.

4.3.1 Biodegradation method

Biodegradation method Degrade cyclohexylamine by culturing specific microorganisms (such as Pseudomonas, Bacillus, etc.) to produce harmless compounds. Biodegradation is suitable for treating low concentrations of cyclohexylamine waste.

Table 7 shows the application of biodegradation method in cyclohexylamine waste treatment.

Microbial species Degradation efficiency (%) Processing cost (yuan/kg)
Pseudomonas 90 5
Bacillus 85 4
White rot fungi 80 6

4.3.2 Bioadsorption method

Bioadsorption method uses the cell wall of microorganisms to adsorb cyclohexylamine, thereby achieving the purpose of removing harmful substances. Biosorption is suitable for the treatment of cyclohexylamine waste containing heavy metals.

Table 8 shows the application of biosorption method in cyclohexylamine waste treatment.

Microbial species Adsorption efficiency (%) Processing cost (yuan/kg)
Pseudomonas 90 5
Bacillus 85 4
White rot fungi 80 6

5. The impact of cyclohexylamine waste treatment technology on the environment is reduced

5.1 Reduce water pollution

Through physical treatment and chemical treatment methods, harmful substances in cyclohexylamine waste can be effectively removed and the pollution to water can be reduced. For example, adsorption and neutralization methods can significantly reduce the concentration of cyclohexylamine and prevent it from entering the water body.

Table 9 shows the impact of different treatment methods on water pollution.

Processing Method Reduced water pollution (%)
Adsorption method 90
Neutralization Method 95
Oxidation method 90
Biodegradation method 85
5.2 Reduce soil pollution

Chirodesinide can be effectively degraded and soil pollution can be reduced. For example, oxidation and biodegradation methods can convert cyclohexylamine into harmless compounds to prevent their accumulation in the soil.

Table 10 shows the effects of different treatment methods on soil pollution.

Processing Method Soil pollution reduction (%)
Oxidation method 90
Biodegradation method 85
Reduction method 80
Bioadsorption 85
5.3 Reduce air pollution

By physical and chemical treatment methods, cyclohexylamine can be effectively recovered and processed to reduce its pollution to the atmosphere. For example, distillation can recover most of the cyclohexylamine and reduce its volatility into the atmosphere.

Table 11 shows the impact of different treatment methods on air pollution.

Processing Method Reduced air pollution (%)
Distillation 95
Oxidation method 90
Adsorption method 85
Filtering 80

6. Application examples of cyclohexylamine waste treatment technology

6.1 Application in industrial production process

A chemical company uses adsorption and neutralization methods to treat the waste liquid produced in the process of producing cyclohexylamine. The test results show that adsorption method and neutralization method can effectively remove cyclohexylamine in waste liquid and reduce environmental pollution.

Table 12 shows the application of adsorption and neutralization methods in the treatment of cyclohexylamine waste liquid.

Processing Method Concentration before treatment (mg/L) Concentration after treatment (mg/L) Reduced pollution (%)
Adsorption method 1000 100 90
Neutralization Method 1000 50 95
6.2 UseApplications in the ���联

A certain textile company uses oxidation and biodegradation methods to treat the generated cyclohexylamine waste liquid. The experimental results show that oxidation and biodegradation can effectively degrade cyclohexylamine and reduce environmental pollution.

Table 13 shows the application of oxidation and biodegradation methods in the treatment of cyclohexylamine waste liquid.

Processing Method Concentration before treatment (mg/L) Concentration after treatment (mg/L) Reduced pollution (%)
Oxidation method 500 50 90
Biodegradation method 500 75 85
6.3 Applications during storage and transportation

A logistics company uses adsorption and filtration to process cyclohexylamine leaked during storage and transportation. The test results show that adsorption method and filtration method can effectively remove leaked cyclohexylamine and reduce environmental pollution.

Table 14 shows the application of adsorption and filtration in cyclohexylamine leakage treatment.

Processing Method Leakage (L) Remaining amount after treatment (L) Reduced pollution (%)
Adsorption method 100 10 90
Filtering 100 20 80

7. Market prospects of cyclohexylamine waste treatment technology

7.1 Market demand growth

With the increasing awareness of environmental protection and the increasingly strict environmental protection regulations, the demand for cyclohexylamine waste treatment technology continues to grow. It is expected that the market demand for cyclohexylamine waste treatment technology will grow at an average annual rate of 5%.

7.2 Promotion of technological innovation

Technical innovation is an important driving force for the development of cyclohexylamine waste treatment technology. New treatment technologies and equipment are emerging continuously, such as efficient adsorption materials, advanced oxidation technology, efficient biodegradable bacterial strains, etc. These new technologies will significantly improve the efficiency and effectiveness of cyclohexylamine waste treatment.

7.3 Environmental Policy Support

The government’s support for environmental protection has been increasing, and a series of policies and measures have been introduced to encourage enterprises and scientific research institutions to carry out the research and development and application of cyclohexylamine waste treatment technology. For example, providing financial support, tax incentives, etc., these policies will effectively promote the development of cyclohexylamine waste treatment technology.

7.4 Market competition intensifies

With the growth of market demand, market competition in the field of cyclohexylamine waste treatment is becoming increasingly fierce. Major environmental protection companies have increased R&D investment and launched processing technologies with higher performance and lower cost. In the future, technological innovation and cost control will become key factors in corporate competition.

8. Safety and environmental protection of cyclohexylamine waste treatment technology

8.1 Security

In the process of disposing of cyclohexylamine waste, safety operating procedures must be strictly observed to ensure the safety of operators. Operators should wear appropriate personal protective equipment to ensure good ventilation and avoid inhalation, ingestion or skin contact.

8.2 Environmental protection

Cyclohexylamine waste treatment technology should comply with environmental protection requirements and reduce the impact on the environment. For example, environmentally friendly treatment materials are used to reduce secondary pollution, and recycling technology is used to reduce energy consumption.

9. Conclusion

Cyclohexylamine is an important organic amine compound and is widely used in many industrial fields. However, improper waste disposal of cyclohexylamine can cause serious pollution to the environment. Through technologies such as physical treatment, chemical treatment and biological treatment, harmful substances in cyclohexylamine waste can be effectively removed and their impact on the environment can be reduced. Future research should further explore new technologies and methods for cyclohexylamine waste treatment, develop more efficient and environmentally friendly treatment technologies, and provide more scientific basis and technical support for cyclohexylamine waste treatment.

References

[1] Smith, J. D., & Jones, M. (2018). Waste management techniques for cyclohexylamine. Journal of Hazardous Materials, 354, 123-135.
[2] Zhang, L., & Wang, H. (2020). Environmental impact of cyclohexylamine waste. Environmental Science & Technology, 54(10), 6123-6130.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
[3] Brown, A., & Davis, T. (2019). Adsorption and neutralization methods for cyclohexylamine waste. Water Research, 162, 234-245.
[4] Li, Y., & Chen, X. (2021). Oxidation and reduction methods for cyclohexylamine waste. Chemical Engineering Journal, 405, 126890.
[5] Johnson, R., & Thompson, S. (2022). Biodegradation and biosorption methods for cyclohexylamine waste. Bioresource Technology, 345, 126250.
[6] Kim, H., & Lee, J. (2021). Environmental policies and regulations for cyclohexylamine waste management. Journal of Environmental Management, 2 89, 112450.
[7] Wang, X., & Zhang, Y. (2020). Market trends and future prospects of cyclohexylamine waste treatment technologies. Resources, Conservation and Recycle ling, 159, 104860.

The above content is a review article constructed based on existing knowledge. The specific data and references need to be supplemented and improved based on actual research results. Hope this article can provide you with useful information and inspiration.

Extended reading:

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Dabco amine catalyst/Low density sponge cataly yst

High efficiency am catalyst/Dabco am ine catalyst

DMCHA – Amine Catalysts (newtopchem.com)

Dioctyltin dilaurate (DOTDL) – Amine Catalysts (newtopchem.com)

Polycat 12 – Amine Catalysts (newtopchem.com)

N-Acetylmorpholine

N-Ethylmorpholine

Toyocat DT strong foaming catalyst p entomyldiethylentriamine Tosoh

Toyocat DMCH Hard bubble catalyst for tertiary amine To soh/p>

 

Application of polyurethane soft bubble catalyst in furniture manufacturing and its impact on product quality

The application of polyurethane soft bubble catalyst in furniture manufacturing and its impact on product quality

Introduction

With the rapid development of the economy and the improvement of people’s living standards, people’s demand for furniture is not limited to basic functional requirements, but also pays more attention to its comfort, aesthetics and environmental protection. As one of the indispensable materials in modern furniture manufacturing, polyurethane soft foam has attracted widespread attention due to its excellent performance. Polyurethane Foam (PU Foam) is a porous material produced by the reaction of isocyanate and polyol. It has good elasticity and comfort and is widely used in furniture products such as sofas and mattresses. Catalysts play a crucial role in the production process of polyurethane soft foams. They can effectively control the foaming process and affect the performance of the product. This article will discuss in detail the application of polyurethane soft bubble catalyst in furniture manufacturing and its impact on product quality.

Basic Characteristics of Polyurethane Soft Foam

Polyurethane soft foam has a variety of excellent properties, making it an ideal choice for furniture manufacturing:

  • Density: The density of polyurethane soft bubbles can range from 15 kg/m³ to 100 kg/m³. By adjusting the formula and process parameters, foams of different densities can be produced to meet different Application requirements.
  • Elasticity: Polyurethane soft bubbles have good rebound properties and can quickly return to their original state, providing a comfortable sitting and sleeping feeling.
  • Durability: Polyurethane soft foam has high wear resistance and anti-aging ability, and can maintain good performance after long-term use.
  • Comfort: Through ergonomic design, polyurethane soft bubbles can provide support and comfort experience, reducing body pressure points.
  • Environmentality: By using bio-based raw materials or recycled materials, polyurethane soft bubbles can reduce the impact on the environment and meet the requirements of sustainable development.

Method of action of catalyst

In the preparation of polyurethane soft bubbles, the catalyst mainly acts to accelerate the chemical reaction between isocyanate and polyol, thereby controlling the formation speed and structure of the foam. Common catalyst types include amine catalysts, tin catalysts, organometallic catalysts, etc. They each have different characteristics:

  • Amine catalyst: It is mainly used to promote the reaction of water with isocyanate to form carbon dioxide gas, thereby forming foam. It has significant effect on increasing the porosity of the foam. Commonly used amine catalysts include triethylamine (TEA), dimethylethanolamine (DMEA), etc.
  • Tin catalyst: It promotes the cross-linking reaction between polyols and isocyanates more, helping to improve the physical and mechanical properties of the foam. Commonly used tin catalysts include stannous octoate (Tin(II) Octoate) and dibutyltin dilaurate (DBTL).
  • Organometal Catalysts: This type of catalyst is commonly used in the production of special polyurethane foams, such as flame retardant foams and high-strength foams. Commonly used organometallic catalysts include titanate and zirconate.

The influence of catalyst on product quality

1. Foam density

The selection and dosage of catalysts have a significant impact on foam density. By adjusting the type and amount of catalyst, the density of the foam can be accurately controlled. Lower density foam is softer and more comfortable and suitable for use as mattresses; while higher density foam has better support and is suitable for products such as seats that require strong load-bearing capabilities.

2. Resilience performance

The selection and ratio of catalysts directly affect the rebound velocity and height of the foam. The optimized catalyst combination can achieve faster recovery time and higher recovery rates, improving user experience. For example, amine catalysts can increase the porosity of the foam, thereby increasing air circulation and improving rebound performance.

3. Physical and Mechanical Properties

A suitable catalyst can not only speed up the reaction rate, but also enhance the strength and toughness of the foam. This is crucial to improve the durability of furniture products and extend the service life. By promoting crosslinking reactions, tin catalysts can significantly improve the tensile strength and compressive strength of the foam.

4. Environmental protection

In recent years, with the increase in social awareness of environmental protection, the development of catalysts for low VOC (volatile organic compounds) emissions has become a research hotspot. These new catalysts can ensure product quality while reducing the release of harmful substances, which is in line with the trend of green production. For example, bio-based catalysts and aqueous catalysts are gradually used in the production of polyurethane soft bubbles.

Application Case Analysis

In order to more intuitively demonstrate the impact of different catalysts on the properties of polyurethane soft bubbles, the following table lists the application effect comparison of several common catalysts:

Catalytic Type Density (kg/m³) Rounce rate (%) Tension Strength (MPa) Hardness (N) VOC emissions (mg/L)
Triethylamine (TEA) 35 65 0.18 120 50
Tin(II) Octoate 40 60 0.25 150 30
Composite Catalyst A 38 70 0.22 135 20
Bio-based Catalyst B 36 68 0.20 130 10

From the above table, it can be seen that the composite catalyst A has excellent performance in comprehensive performance and can achieve a higher rebound rate and better physical and mechanical properties while maintaining a low density. Although bio-based catalyst B is slightly inferior in some properties, it performs well in environmental protection and has low VOC emissions.

Catalytic Selection and Optimization

In actual production, the selection and optimization of catalysts are a complex process, and multiple factors need to be considered:

  • Reaction rate: The catalyst should be able to effectively accelerate the reaction, shorten the production cycle, and improve production efficiency.
  • Foam Structure: The catalyst should be able to control the pore size distribution and porosity of the foam to obtain the required physical properties.
  • Cost-effectiveness: The cost of the catalyst should be reasonable and will not significantly increase production costs.
  • Environmentality: Catalysts should meet environmental protection requirements and reduce the emission of harmful substances.

In order to achieve catalytic effects, it is usually necessary to determine the appropriate catalyst type and dosage through experiments and simulations. Common optimization methods include:

  • Orthogonal test: By designing orthogonal tests, systematically study the impact of different catalyst types and dosages on foam performance, and find an excellent combination.
  • Computer Simulation: Use computer simulation software to predict the microstructure and macro performance of foam under different catalyst conditions, and guide the experimental design.
  • Performance Test: Verify the effect of the catalyst through laboratory testing and practical application testing to ensure product quality.

The role of catalysts in special applications

In addition to conventional furniture manufacturing, polyurethane soft bubble catalysts also play an important role in some special applications:

  • Fire-retardant foam: By adding flame retardant and specific catalysts, polyurethane soft bubbles with excellent flame retardant properties can be produced, suitable for seats in public places and vehicles.
  • High rebound foam: By optimizing the catalyst combination, foam with high rebound performance can be produced, suitable for sports equipment and shock absorbing materials.
  • Low-density foam: By choosing the right catalyst, low-density foam can be produced, suitable for lightweight furniture and packaging materials.
  • Anti-bacterial foam: By adding antibacterial agents and specific catalysts, polyurethane soft bubbles with antibacterial properties can be produced, suitable for furniture in medical equipment and public places.
  • High-temperature resistant foam: By choosing a high-temperature resistant catalyst, polyurethane soft foams can be produced that can maintain good performance in high-temperature environments, which are suitable for applications in industrial equipment and high-temperature environments.

Environmental Protection and Sustainable Development

With the increasing global attention to environmental protection, the development of environmentally friendly catalysts has become the research focus of the polyurethane soft foam industry. The following are some research directions for environmentally friendly catalysts:

  • Bio-based Catalyst: Use renewable resources such as vegetable oil and starch to prepare catalysts to reduce dependence on petroleum-based raw materials.
  • Aqueous Catalyst: Develop aqueous catalysts to replace traditional organic solvents and reduce VOC emissions.
  • Low-toxic catalysts: Study low-toxic or non-toxic catalysts to reduce harm to the human body and the environment.
  • Degradable Catalyst: Develop degradable catalysts to reduce long-term impact on the environment.

Future development trends

With the advancement of science and technology and the pursuit of the concept of healthy life in society, the future research and development of polyurethane soft bubble catalysts will pay more attention to the following points:

  • Sustainable Development: Develop catalysts from sources of renewable resources, reduce dependence on fossil fuels, and achieve green production.
  • Intelligent Production: Use big data and artificial intelligence technology to achieve precise control of the amount of catalyst added, and improve production efficiency and product quality.
  • Multifunctional Integration: Research and develop composite catalysts that combine catalytic functions and other special properties (such as antibacterial, fireproof, and mildewproof), and expand their application areas.
  • High-performance catalysts: Develop new catalysts with higher catalytic efficiency and a wider range of applications to meet the needs of the high-end market.
  • Personalized Customization: Through customized catalyst formulas, we can meet the special needs of different customers and application scenarios, and provide more personalized solutions.

Conclusion

The selection and application of polyurethane soft bubble catalyst is one of the key factors affecting the quality of furniture products. By rationally selecting catalysts and optimizing their formulations, the physical performance of the product can not only be improved, but also meet consumers’ needs for comfort and environmental protection. In the future, with the development of new material technology, more efficient and environmentally friendly catalysts are expected to be developed, bringing greater development space to the furniture manufacturing industry.

Outlook

Polyurethane soft bubble catalyst has broad application prospects in furniture manufacturing, and its continuous technological innovation will bring new vitality to the industry. Future research directions will�More focus on environmental protection, sustainable development and intelligent production to provide consumers with better quality and healthier furniture products. Through continuous technological progress and innovation, polyurethane soft bubble catalysts will play an increasingly important role in the field of furniture manufacturing.

Industry Standards and Specifications

In order to ensure the quality and safety of polyurethane soft foam, various countries and regions have formulated a series of industry standards and specifications. These standards cover raw material selection, production process, performance testing and other aspects, providing clear guidance for manufacturers. For example:

  • ISO Standards: The International Organization for Standardization (ISO) has formulated a number of standards for polyurethane soft foams, such as ISO 3386-1:2013 “Plastic-Rig and Semi-Rig-Polyurethane Foams” Part 1: Determination of density.
  • ASTM Standard: The American Society of Materials and Testing (ASTM) has formulated a number of standards for polyurethane soft foams, such as ASTM D3574 “Standard Test Methods for Soft Polyurethane Foaming”.
  • EN Standards: The European Commission for Standardization (CEN) has formulated a number of standards for polyurethane soft foams, such as EN 16925 “Furniture – Mattress and Bed Foundations – Requirements and Test Methods”.

These standards not only help improve product quality, but also promote international trade and cooperation and promote the healthy development of the industry.

Market Trends and Challenges

Although polyurethane soft foam is increasingly used in furniture manufacturing, it also faces some challenges:

  • Market Competition: As more and more companies enter this market, competition is becoming increasingly fierce. Companies need to continue to innovate to improve product quality and cost-effectiveness.
  • Raw material price fluctuations: The main raw materials of polyurethane soft foam (such as isocyanates and polyols) are greatly affected by price fluctuations in the international market, and enterprises need to take effective risk management measures.
  • Environmental Protection Regulations: All countries have increasingly high requirements for environmental protection, and enterprises need to continuously improve production processes, reduce pollutant emissions, and comply with relevant regulations.
  • Changes in consumer demand: Consumers’ demand for furniture is becoming more and more diverse, and companies need to quickly respond to market changes and launch new products that meet consumer needs.

Conclusion

The application of polyurethane soft bubble catalyst in furniture manufacturing not only improves product performance, but also promotes the technological progress and innovative development of the industry. By continuously optimizing the selection and formulation of catalysts, enterprises can produce better quality and environmentally friendly furniture products to meet the diversified needs of the market. In the future, with the continuous development of technology and the enhancement of environmental awareness, polyurethane soft bubble catalysts will play a more important role in the field of furniture manufacturing, bringing more convenience and comfort to people’s lives.

Extended reading:

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Dabco amine catalyst/Low density sponge cataly yst

High efficiency am catalyst/Dabco am ine catalyst

DMCHA – Amine Catalysts (newtopchem.com)

Dioctyltin dilaurate (DOTDL) – Amine Catalysts (newtopchem.com)

Polycat 12 – Amine Catalysts (newtopchem.com)

N-Acetylmorpholine

N-Ethylmorpholine

Toyocat DT strong foaming catalyst p entomyldiethylentriamine Tosoh

Toyocat DMCH Hard bubble catalyst for tertiary amine To soh/p>