Month: November 2023

Elastomer environmental protection catalyst/NT CAT E-129

Elastomer environmental protection catalyst/NT CAT E-129

Overview:

Product name: polyurethane elastomer environmental catalyst NT CAT E-129

Alias: polyurethane elastomer eco-friendly catalyst, elastomer eco-friendly catalyst, eco-friendly catalyst, elastomer catalyst, elastomer catalyst NT CAT E-129

Product Description: Has a certain special odor, insoluble in water, easily soluble in general polyurethane raw materials such as polyether, polyester polyol, etc..

Properties description:

The appearance of this product is light yellow transparent liquid, chromaticity (APHA) ≤ 50; density 1.17g/cm3 (25 ℃), viscosity 125mPa.s (25 ℃), flash point 127 ℃; there is a certain special smell, insoluble in water, easily soluble in general polyurethane raw materials, such as polyether, polyester polyol, etc..

This product does not contain PBB, PBDE, lead, mercury, cadmium, etc. restricted by RoHS regulations, and at the same time, it does not contain nine types of organotin compounds such as octyltin, butyltin, phenyltin, etc. Polyurethane materials synthesized by the use of this product can pass the stringent environmental protection regulations of the U.S.A. and the European Union. It is a substitute for traditional organic mercury and lead catalysts in certain fields of polyurethane.

Product Characteristics:

This product is developed for the requirement of no air bubbles in the field of polyurethane CASE (especially for polyurethane elastomers), which is completely different from the commonly used amine-tin catalysts, and its unique water-suppressing function can effectively shield the reaction between the trace water contained in the polyurethane raw materials and the isocyanate, avoiding the CO2 bubbles generated from the reaction (polyether polyols can be used without high-temperature vacuum dewatering). Even in humid rainy weather, it can also effectively avoid the phenomena of multi-foam, cracking, bulging and peeling, etc. This feature is very similar to that of organic mercury.

The unique catalytic function of this product has a longer operation time compared with other products in this series, which ensures the original low viscosity and good fluidity of the combination material before mixing, which is very important for reducing the air bubbles produced by mixing and filling the mold cavity quickly; when the temperature in the system reaches 40℃, the super catalytic effect of this product begins to appear, which can make the polyurethane combination material reach the dewatering point within 20 minutes (or even shorter) after the mixing is completed. (or even shorter) after mixing, the polyurethane composition reaches the required strength for demolding without subsequent heating and vulcanization, which is typical of low energy consumption and high efficiency.

Areas of application:

NT CAT E-129 has a good delay effect in this series of catalysts and excellent hydrolysis resistance, when the material temperature is lower than 40℃, the catalytic activity is very low, when the material temperature reaches 40℃, the catalytic activity starts to show, when the material temperature reaches 50℃, the catalytic activity increases rapidly, and when the temperature reaches 110℃, the catalytic activity is even stronger than common organotin and organobismuth on the market.NT CAT E-129 is very suitable for the production of organic tin and organic bismuth. CAT E-129 is very suitable for DETDA (E-100) as a curing agent for the combination of materials, such as the production of transparent ** shoes skate wheel combination of materials and semi-polyurethane, compared with other catalysts have a longer flow time (pot life) to meet the needs of the mold filling, so the production of hardness more than 92A skateboard wheels, shock absorbers and large products.

NT CAT E-129 is used in MDI systems using alcohols as curing agents. It is characterized by a gentle reaction temperature rise curve and lower shrinkage than ordinary tin catalysts.

This product can be widely used in the field of polyurethane CASE to produce ** wheels, one and two-component sealants, coatings, adhesives, etc. It is used for aliphatic isocyanates and will not yellow the products.

Instructions for use:

It is recommended to add polyol (Polyol, P material) component when this product is used, and it is good to add it before sealing after vacuum degassing, and mix it well. It can also be added into isocyanate (ISO, I material) component, but because of some raw materials may have the danger of gel tank, please carry out the applicability test first. The dosage is related to the product system and hardness, etc. Generally, the dosage is 0.5～1‰ of the weight of P material. Because of the different uses of the product environmental requirements vary, it is recommended that the user in accordance with the relevant standards to do the actual test shall prevail.

Shelf life.

Unopened shelf life of 12 months.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool, properly ventilated area.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

elastomer environmental protection catalyst/environmental protection catalyst

elastomer environmental protection catalyst/environmental protection catalyst

Overview:

Product name: polyurethane elastomer environmental catalyst NT CAT E-129

Alias: polyurethane elastomer eco-friendly catalyst, elastomer eco-friendly catalyst, eco-friendly catalyst, elastomer catalyst, elastomer catalyst NT CAT E-129

Product Description: Has a certain special odor, insoluble in water, easily soluble in general polyurethane raw materials such as polyether, polyester polyol, etc..

Properties description:

The appearance of this product is light yellow transparent liquid, chromaticity (APHA) ≤ 50; density 1.17g/cm3 (25 ℃), viscosity 125mPa.s (25 ℃), flash point 127 ℃; there is a certain special smell, insoluble in water, easily soluble in general polyurethane raw materials, such as polyether, polyester polyol, etc..

This product does not contain PBB, PBDE, lead, mercury, cadmium, etc. restricted by RoHS regulations, and at the same time, it does not contain nine types of organotin compounds such as octyltin, butyltin, phenyltin, etc. Polyurethane materials synthesized by the use of this product can pass the stringent environmental protection regulations of the U.S.A. and the European Union. It is a substitute for traditional organic mercury and lead catalysts in certain fields of polyurethane.

Product Characteristics:

This product is developed for the requirement of no air bubbles in the field of polyurethane CASE (especially for polyurethane elastomers), which is completely different from the commonly used amine-tin catalysts, and its unique water-suppressing function can effectively shield the reaction between the trace water contained in the polyurethane raw materials and the isocyanate, avoiding the CO2 bubbles generated from the reaction (polyether polyols can be used without high-temperature vacuum dewatering). Even in humid rainy weather, it can also effectively avoid the phenomena of multi-foam, cracking, bulging and peeling, etc. This feature is very similar to that of organic mercury.

The unique catalytic function of this product has a longer operation time compared with other products in this series, which ensures the original low viscosity and good fluidity of the combination material before mixing, which is very important for reducing the air bubbles produced by mixing and filling the mold cavity quickly; when the temperature in the system reaches 40℃, the super catalytic effect of this product begins to appear, which can make the polyurethane combination material reach the dewatering point within 20 minutes (or even shorter) after the mixing is completed. (or even shorter) after mixing, the polyurethane composition reaches the required strength for demolding without subsequent heating and vulcanization, which is typical of low energy consumption and high efficiency.

Areas of application:

NT CAT E-129 has a good delay effect in this series of catalysts and excellent hydrolysis resistance, when the material temperature is lower than 40℃, the catalytic activity is very low, when the material temperature reaches 40℃, the catalytic activity starts to show, when the material temperature reaches 50℃, the catalytic activity increases rapidly, and when the temperature reaches 110℃, the catalytic activity is even stronger than common organotin and organobismuth on the market.NT CAT E-129 is very suitable for the production of organic tin and organic bismuth. CAT E-129 is very suitable for DETDA (E-100) as a curing agent for the combination of materials, such as the production of transparent ** shoes skate wheel combination of materials and semi-polyurethane, compared with other catalysts have a longer flow time (pot life) to meet the needs of the mold filling, so the production of hardness more than 92A skateboard wheels, shock absorbers and large products.

NT CAT E-129 is used in MDI systems using alcohols as curing agents. It is characterized by a gentle reaction temperature rise curve and lower shrinkage than ordinary tin catalysts.

This product can be widely used in the field of polyurethane CASE to produce ** wheels, one and two-component sealants, coatings, adhesives, etc. It is used for aliphatic isocyanates and will not yellow the products.

Instructions for use:

It is recommended to add polyol (Polyol, P material) component when this product is used, and it is good to add it before sealing after vacuum degassing, and mix it well. It can also be added into isocyanate (ISO, I material) component, but because of some raw materials may have the danger of gel tank, please carry out the applicability test first. The dosage is related to the product system and hardness, etc. Generally, the dosage is 0.5～1‰ of the weight of P material. Because of the different uses of the product environmental requirements vary, it is recommended that the user in accordance with the relevant standards to do the actual test shall prevail.

Shelf life.

Unopened shelf life of 12 months.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool, properly ventilated area.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Dabco BL-13/Niax A-133/Jeffcat ZF-24

Dabco BL-13/Niax A-133/Jeffcat ZF-24

Overview:

Product Name: Dabco BL-13

Alias: Dabco BL-13, Niax Catalyst A-133, Niax A-133, Jeffcat ZF-24, Foaming Catalyst Dabco BL-13, Polyurethane Foaming Catalyst Niax A-133, Foam Amine Catalyst, Strong Foaming Catalyst

Product Description: Easy to meter standard polyurethane foaming catalyst Niax A-133

Description: Niax A-133 is a standardized foaming catalyst for polyurethane.

Niax catalyst A-133 is a low concentration of bis(2-dimethylaminoethyl) ether, one of the most active polyurethane foam amine catalysts known. For convenience, Niax Catalyst A-133 consists of the pure amine ether BDMAEE diluted with dipropylene glycol monohydrate for ease of dosing and to allow for the use of conventional amounts in foam formulations.

Niax Catalyst A-133 can be used over a wide range with gel catalysts Niax A-33 or stannous octoate to control foam rise time without affecting the tin operating range.

Typical Physical Properties.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 0.98

Viscosity @20°C mPa.s 58

Freezing point ℃ <-50

Vapor pressure mmHg 0.0125

Solubility-water 20℃ completely dissolved

Solubility-Benzene 20℃ Completely dissolved

Refractive index 25℃ 1.43

Flash point (closed cup)℃ ＞90

Characteristics

1、Strong foaming catalyst

2、Easy to measure in low concentration

3、Better compatibility with gel catalysts

4、Compatible with polyol

Recommendations for use.

It is recommended that Niax Catalyst A-133 be used in soft sponge applications at 0.15-0.6pphp, in conjunction with other gel catalysts such as Niax A-33 and stannous octanoate to achieve a balanced foaming and gelation reaction.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Foam amine catalyst/Strong blowing catalyst

Foam amine catalyst/Strong blowing catalyst

Overview:

Product Name: Dabco BL-13

Alias: Dabco BL-13, Niax Catalyst A-133, Niax A-133, Jeffcat ZF-24, Foaming Catalyst Dabco BL-13, Polyurethane Foaming Catalyst Niax A-133, Foam Amine Catalyst, Strong Foaming Catalyst

Product Description: Easy to meter standard polyurethane foaming catalyst Niax A-133

Description: Niax A-133 is a standardized foaming catalyst for polyurethane.

Niax catalyst A-133 is a low concentration of bis(2-dimethylaminoethyl) ether, one of the most active polyurethane foam amine catalysts known. For convenience, Niax Catalyst A-133 consists of the pure amine ether BDMAEE diluted with dipropylene glycol monohydrate for ease of dosing and to allow for the use of conventional amounts in foam formulations.

Niax Catalyst A-133 can be used over a wide range with gel catalysts Niax A-33 or stannous octoate to control foam rise time without affecting the tin operating range.

Typical Physical Properties.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 0.98

Viscosity @20°C mPa.s 58

Freezing point ℃ <-50

Vapor pressure mmHg 0.0125

Solubility-water 20℃ completely dissolved

Solubility-Benzene 20℃ Completely dissolved

Refractive index 25℃ 1.43

Flash point (closed cup)℃ ＞90

Characteristics

1、Strong foaming catalyst

2、Easy to measure in low concentration

3、Better compatibility with gel catalysts

4、Compatible with polyol

Recommendations for use.

It is recommended that Niax Catalyst A-133 be used in soft sponge applications at 0.15-0.6pphp, in conjunction with other gel catalysts such as Niax A-33 and stannous octanoate to achieve a balanced foaming and gelation reaction.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Polyurethane blowing catalyst/Blowing catalyst

Polyurethane blowing catalyst/Blowing catalyst

Overview:

Product Name: Dabco BL-13

Alias: Dabco BL-13, Niax Catalyst A-133, Niax A-133, Jeffcat ZF-24, Foaming Catalyst Dabco BL-13, Polyurethane Foaming Catalyst Niax A-133, Foam Amine Catalyst, Strong Foaming Catalyst

Product Description: Easy to meter standard polyurethane foaming catalyst Niax A-133

Description: Niax A-133 is a standardized foaming catalyst for polyurethane.

Niax catalyst A-133 is a low concentration of bis(2-dimethylaminoethyl) ether, one of the most active polyurethane foam amine catalysts known. For convenience, Niax Catalyst A-133 consists of the pure amine ether BDMAEE diluted with dipropylene glycol monohydrate for ease of dosing and to allow for the use of conventional amounts in foam formulations.

Niax Catalyst A-133 can be used over a wide range with gel catalysts Niax A-33 or stannous octoate to control foam rise time without affecting the tin operating range.

Typical Physical Properties.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 0.98

Viscosity @20°C mPa.s 58

Freezing point ℃ <-50

Vapor pressure mmHg 0.0125

Solubility-water 20℃ completely dissolved

Solubility-Benzene 20℃ Completely dissolved

Refractive index 25℃ 1.43

Flash point (closed cup)℃ ＞90

Characteristics

1、Strong foaming catalyst

2、Easy to measure in low concentration

3、Better compatibility with gel catalysts

4、Compatible with polyol

Recommendations for use.

It is recommended that Niax Catalyst A-133 be used in soft sponge applications at 0.15-0.6pphp, in conjunction with other gel catalysts such as Niax A-33 and stannous octanoate to achieve a balanced foaming and gelation reaction.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

PC CAT TKA/polyurethane metal carboxylate catalyst Polycat 46

PC CAT TKA/polyurethane metal carboxylate catalyst Polycat 46

Overview:

Product Name: Polycat 46, Metal Carboxylate Catalyst for Polyurethanes

Alias: Potassium acetate glycol solution, Polycat 46, PC CAT TKA, polyurethane metal carboxylate catalyst Polycat 46, metal carboxylate catalyst Polycat 46, catalyst Polycat 46, trimerization catalyst Polycat 46

Product Description: Polycat 46 Tripolymerization Catalyst for Polyurethane PIP Rigid Foam Systems

Product Properties

Appearance: white liquid

Viscosity(25℃,mPa.s):200

Density (25℃,g/cm3):1.26

Water solubility: soluble in water

Flash point (PMCC,℃): >110

Hydroxyl value (mgKOH/g): 1122

Brief introduction.

Polycat 46 catalyst is a polyurethane metal carboxylate catalyst that promotes isocyanurate reaction (trimerization catalyzed reaction) in PIP system of polyurethane rigid foams, which can be used in various rigid foams.

Typical Physical Properties.

Appearance Colorless transparent liquid

Specific gravity 1.26

Viscosity @25℃ mPa.s 200

Water solubility @25℃ soluble

Flash point, ℃ ＞110

Characteristics

High trimerization rate

Suggested Use: Polycat 46 catalyst is widely used in a variety of polyurethane applications such as

Polycat 46 catalyst is widely used in a variety of polyurethane applications such as PIP rigid panel foams, semi-rigid molded dashboard foams, PIR rigid foams, and energy absorbing rigid foams.

Product Use

Polycat 46 is used to promote isocyanate reactions (trimerization) and can be used in a variety of rigid foams.

Shelf life.

Keep unopened for two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

polyurethane metal carboxylate catalyst Polycat 46/catalyst Polycat 46

polyurethane metal carboxylate catalyst Polycat 46/catalyst Polycat 46

Overview:

Product Name: Polycat 46, Metal Carboxylate Catalyst for Polyurethanes

Alias: Potassium acetate glycol solution, Polycat 46, PC CAT TKA, polyurethane metal carboxylate catalyst Polycat 46, metal carboxylate catalyst Polycat 46, catalyst Polycat 46, trimerization catalyst Polycat 46

Product Description: Polycat 46 Tripolymerization Catalyst for Polyurethane PIP Rigid Foam Systems

Product Properties

Appearance: white liquid

Viscosity(25℃,mPa.s):200

Density (25℃,g/cm3):1.26

Water solubility: soluble in water

Flash point (PMCC,℃): >110

Hydroxyl value (mgKOH/g): 1122

Brief introduction.

Polycat 46 catalyst is a polyurethane metal carboxylate catalyst that promotes isocyanurate reaction (trimerization catalyzed reaction) in PIP system of polyurethane rigid foams, which can be used in various rigid foams.

Typical Physical Properties.

Appearance Colorless transparent liquid

Specific gravity 1.26

Viscosity @25℃ mPa.s 200

Water solubility @25℃ soluble

Flash point, ℃ ＞110

Characteristics

High trimerization rate

Suggested Use: Polycat 46 catalyst is widely used in a variety of polyurethane applications such as

Polycat 46 catalyst is widely used in a variety of polyurethane applications such as PIP rigid panel foams, semi-rigid molded dashboard foams, PIR rigid foams, and energy absorbing rigid foams.

Product Use

Polycat 46 is used to promote isocyanate reactions (trimerization) and can be used in a variety of rigid foams.

Shelf life.

Keep unopened for two years

Storage and transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Polyurethane Catalyst Polycat SA-102/DBU octoate

Polyurethane Catalyst Polycat SA-102/DBU octoate

Overview:

Product Name: Polycat SA-102 Polyurethane Catalysts

Alias: DBU octanoate, Polycat SA102, Niax A-577, tertiary amine reactive delay catalyst Polycat SA-102, reactive delay catalyst Polycat SA-102, delay catalyst Polycat SA-102, tertiary amine reactive catalyst Polycat SA-102

Product Description: Polycat SA-102 is a tertiary amine reactive delay catalyst.

Product Physical Properties:

Appearance: light yellow liquid

Viscosity (25℃,mPa.s): 460

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 104

Hydroxyl value (mgKOH/g): 1516

DBU octanoate Polycat SA102 Niax A-577 tertiary amine reactive delay catalyst Polycat SA-102 reactive delay catalyst Polycat SA-102 delay catalyst Polycat SA-102 tertiary amine reactive catalyst Polycat SA-102

Product Usage:

Polycat SA-102 is a tertiary amine reactive delay catalyst that strongly promotes the reaction of urethanes (polyol-isocyanates) in microcellular foams, rigid foams, integral skin foams, coatings, adhesives, sealants, and elastomers under thermal activation;

Polycat SA-102 is suitable for use on products that require a certain delay at the beginning and then cook quickly, Polycat SA-102 will not participate in the reaction at the beginning, the heat released from the urethane reaction or urethane reaction will cause Polycat SA-102 to quickly unseal, and the unsealed substance will quickly catalyze the urethane reaction, resulting in a fast curing of the product;

The heat-sensitive temperature of Polycat SA-102 is 60℃, which can prolong the emulsion time and rapid demolding.

Shelf life.

Unopened shelf life of 12 months.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Polycat SA102/Niax A-577

Polycat SA102/Niax A-577

Overview:

Product Name: Polycat SA-102 Polyurethane Catalysts

Alias: DBU octanoate, Polycat SA102, Niax A-577, tertiary amine reactive delay catalyst Polycat SA-102, reactive delay catalyst Polycat SA-102, delay catalyst Polycat SA-102, tertiary amine reactive catalyst Polycat SA-102

Product Description: Polycat SA-102 is a tertiary amine reactive delay catalyst.

Product Physical Properties:

Appearance: light yellow liquid

Viscosity (25℃,mPa.s): 460

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 104

Hydroxyl value (mgKOH/g): 1516

DBU octanoate Polycat SA102 Niax A-577 tertiary amine reactive delay catalyst Polycat SA-102 reactive delay catalyst Polycat SA-102 delay catalyst Polycat SA-102 tertiary amine reactive catalyst Polycat SA-102

Product Usage:

Polycat SA-102 is a tertiary amine reactive delay catalyst that strongly promotes the reaction of urethanes (polyol-isocyanates) in microcellular foams, rigid foams, integral skin foams, coatings, adhesives, sealants, and elastomers under thermal activation;

Polycat SA-102 is suitable for use on products that require a certain delay at the beginning and then cook quickly, Polycat SA-102 will not participate in the reaction at the beginning, the heat released from the urethane reaction or urethane reaction will cause Polycat SA-102 to quickly unseal, and the unsealed substance will quickly catalyze the urethane reaction, resulting in a fast curing of the product;

The heat-sensitive temperature of Polycat SA-102 is 60℃, which can prolong the emulsion time and rapid demolding.

Shelf life.

Unopened shelf life of 12 months.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

reaction delay catalyst Polycat SA-102/delay catalyst Polycat SA-102

reaction delay catalyst Polycat SA-102/delay catalyst Polycat SA-102

Overview:

Product Name: Polycat SA-102 Polyurethane Catalysts

Alias: DBU octanoate, Polycat SA102, Niax A-577, tertiary amine reactive delay catalyst Polycat SA-102, reactive delay catalyst Polycat SA-102, delay catalyst Polycat SA-102, tertiary amine reactive catalyst Polycat SA-102

Product Description: Polycat SA-102 is a tertiary amine reactive delay catalyst.

Product Physical Properties:

Appearance: light yellow liquid

Viscosity (25℃,mPa.s): 460

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 104

Hydroxyl value (mgKOH/g): 1516

DBU octanoate Polycat SA102 Niax A-577 tertiary amine reactive delay catalyst Polycat SA-102 reactive delay catalyst Polycat SA-102 delay catalyst Polycat SA-102 tertiary amine reactive catalyst Polycat SA-102

Product Usage:

Polycat SA-102 is a tertiary amine reactive delay catalyst that strongly promotes the reaction of urethanes (polyol-isocyanates) in microcellular foams, rigid foams, integral skin foams, coatings, adhesives, sealants, and elastomers under thermal activation;

Polycat SA-102 is suitable for use on products that require a certain delay at the beginning and then cook quickly, Polycat SA-102 will not participate in the reaction at the beginning, the heat released from the urethane reaction or urethane reaction will cause Polycat SA-102 to quickly unseal, and the unsealed substance will quickly catalyze the urethane reaction, resulting in a fast curing of the product;

The heat-sensitive temperature of Polycat SA-102 is 60℃, which can prolong the emulsion time and rapid demolding.

Shelf life.

Unopened shelf life of 12 months.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the package cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 [email protected]

Telephone:

86-021-5657 7831

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com