November 2023 – Pu catalyst

Dabco NE1060/Non-emissive polyurethane catalyst

Dabco NE1060/Non-emissive polyurethane catalyst

Overview:

Product name: Dabco NE1060 catalyst

Alias: Dabco NE1060 Catalyst, Dabco NE1060, Foam Catalyst Dabco NE1060, Non-emitting Polyurethane Catalysts

Product Description: Dabco NE1060 Catalyst for Flexible Molded Polyurethane Foams

Description.

Dabco NE1060 catalyst is a new, second generation, non-emission (NE) gel catalyst for diphenylmethylene diisocyanate (MDI) and toluene diisocyanate (TDI) polyurethane expanded flexible molded foams Dabco NE1060 catalyst maintains the foam properties while forming a Dabco NE1060 catalysts maintain foam properties while forming a strong chemical bond with the polyurethane foam matrix. Used in automotive manufacturing, this product eliminates the odor and VOC emissions associated with polyurethane catalysts that cause windshield fogging and beading and staining of polyethylene plastics.

Typical Physical Properties.

Appearance Colorless transparent liquid

Specific gravity 1.06

Viscosity @25℃ mPa.s 1200

Water solubility @25℃ completely dissolved

Flash point, ℃ 168

Characteristics

1、Non emitting polyurethane catalyst

2、Non emission of volatile organic compounds

3、No staining of polyethylene plastic

4、Does not let windshield fog and water droplets appear

Stabilized masterbatch

6、Reduce odor

7、Control the stability between batches

Recommendations for Use.

Dabco NE1060 catalyst is recommended for use in TDI or TDI/MDI polyurethane high resilient (HR) foams, as well as TDI/MDI-based or MDI-based polyurethane cold cure molded foams, and polyurethane liner foam systems. This non-volatile catalyst is compatible with other commonly used polyurethane catalysts and additives and is highly miscible with polyols and polyol-water mixtures.

Dabco NE1060 catalyst is recommended for use at levels of 0.50 to 1.50 pphp in MDI systems and 0.40 to 0.70 pphp in TDI systems.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool, ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

Non-emissive polyurethane catalyst/Dabco NE1060 catalyst

Non-emissive polyurethane catalyst/Dabco NE1060 catalyst

Overview:

Product name: Dabco NE1060 catalyst

Alias: Dabco NE1060 Catalyst, Dabco NE1060, Foam Catalyst Dabco NE1060, Non-emitting Polyurethane Catalysts

Product Description: Dabco NE1060 Catalyst for Flexible Molded Polyurethane Foams

Description.

Dabco NE1060 catalyst is a new, second generation, non-emission (NE) gel catalyst for diphenylmethylene diisocyanate (MDI) and toluene diisocyanate (TDI) polyurethane expanded flexible molded foams Dabco NE1060 catalyst maintains the foam properties while forming a Dabco NE1060 catalysts maintain foam properties while forming a strong chemical bond with the polyurethane foam matrix. Used in automotive manufacturing, this product eliminates the odor and VOC emissions associated with polyurethane catalysts that cause windshield fogging and beading and staining of polyethylene plastics.

Typical Physical Properties.

Appearance Colorless transparent liquid

Specific gravity 1.06

Viscosity @25℃ mPa.s 1200

Water solubility @25℃ completely dissolved

Flash point, ℃ 168

Characteristics

1、Non emitting polyurethane catalyst

2、Non emission of volatile organic compounds

3、No staining of polyethylene plastic

4、Does not let windshield fog and water droplets appear

Stabilized masterbatch

6、Reduce odor

7、Control the stability between batches

Recommendations for Use.

Dabco NE1060 catalyst is recommended for use in TDI or TDI/MDI polyurethane high resilient (HR) foams, as well as TDI/MDI-based or MDI-based polyurethane cold cure molded foams, and polyurethane liner foam systems. This non-volatile catalyst is compatible with other commonly used polyurethane catalysts and additives and is highly miscible with polyols and polyol-water mixtures.

Dabco NE1060 catalyst is recommended for use at levels of 0.50 to 1.50 pphp in MDI systems and 0.40 to 0.70 pphp in TDI systems.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool, ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

High efficiency amine catalyst/Dabco amine catalyst

High efficiency amine catalyst/Dabco amine catalyst

Overview:

Product Name: Dabco RP205

Alias: Dabco RP205, Addocat 9727P, high efficient amine catalyst, Dabco amine catalyst, low density sponge catalyst Dabco RP205

Product Description: High efficient amine catalyst for low density (below 10kg\\\m³) sponges, with good operating tolerance and foam stabilization effect, it can replace the similar product SMP, which plays the role of amine catalyst. Has the ability to increase hardness. Used in the manufacture of low density flexible slabstock foam, it can provide wide process latitude.

Profile:

RP-205 is an amine catalyst developed for “dichloromethane formulations” (content >20), which is suitable for the production of low density (less than 10 kg/m3) slabstock foams.

RP-205 has a high catalytic capacity and high catalytic activity.

Compared to conventional amine catalysts, catalyst RP-205 provides good operating latitude and foam stabilization during the foaming process.

Compared with the same type of amine catalyst in the market, Catalyst RP-205 can increase the sponge hardness.

It is easy to use and can be directly replaced by customers using the same type of amine catalyst (within 10% difference in dosage).

Points for use: When using RP-205, it is recommended to pay attention to the following points:

RP-205 is recommended to be used as a separate amine catalyst.

It is recommended that the original amount of amine catalyst used be replaced by 1:1, and then fine-tuned according to actual needs. (It is recommended that the fine-tuning range is within 10% of the amine dosage.)

3、Catalyst RP-205 can be used directly for dosing or pre-mixed with polyether, the mixing ratio can be 1:5 to 1:12 or lower.

4、When catalyst RP-205 is mixed with polyether polyol, the storage period of the mixture should not exceed 12 hours. (Use up on the same day)

5、Because of the low vapor pressure of RP-205, the package should be sealed immediately after use to avoid volatilization and failure.

Shelf life.

Keep unopened for two years

Storage:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

Dabco amine catalyst/Low density sponge catalyst

Dabco amine catalyst/Low density sponge catalyst

Overview:

Product Name: Dabco RP205

Alias: Dabco RP205, Addocat 9727P, high efficient amine catalyst, Dabco amine catalyst, low density sponge catalyst Dabco RP205

Product Description: High efficient amine catalyst for low density (below 10kg\\\m³) sponges, with good operating tolerance and foam stabilization effect, it can replace the similar product SMP, which plays the role of amine catalyst. Has the ability to increase hardness. Used in the manufacture of low density flexible slabstock foam, it can provide wide process latitude.

Profile:

RP-205 is an amine catalyst developed for “dichloromethane formulations” (content >20), which is suitable for the production of low density (less than 10 kg/m3) slabstock foams.

RP-205 has a high catalytic capacity and high catalytic activity.

Compared to conventional amine catalysts, catalyst RP-205 provides good operating latitude and foam stabilization during the foaming process.

Compared with the same type of amine catalyst in the market, Catalyst RP-205 can increase the sponge hardness.

It is easy to use and can be directly replaced by customers using the same type of amine catalyst (within 10% difference in dosage).

Points for use: When using RP-205, it is recommended to pay attention to the following points:

RP-205 is recommended to be used as a separate amine catalyst.

It is recommended that the original amount of amine catalyst used be replaced by 1:1, and then fine-tuned according to actual needs. (It is recommended that the fine-tuning range is within 10% of the amine dosage.)

3、Catalyst RP-205 can be used directly for dosing or pre-mixed with polyether, the mixing ratio can be 1:5 to 1:12 or lower.

4、When catalyst RP-205 is mixed with polyether polyol, the storage period of the mixture should not exceed 12 hours. (Use up on the same day)

5、Because of the low vapor pressure of RP-205, the package should be sealed immediately after use to avoid volatilization and failure.

Shelf life.

Keep unopened for two years

Storage:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Overview:

Product Name: Dabco RP208 High Efficiency Reactive Balancing Catalyst

Alias: Dabco RP208, high efficiency reactive equilibrium catalyst, reactive equilibrium catalyst, low odor reactive equilibrium catalyst, high resilience sponge reactive equilibrium catalyst

Product Description: Dabco RP208 High Efficiency Reactive Equilibrium Catalyst is suitable for the production of low odor, low VOC soft sponges, and is recommended to be used in medium and high density ordinary sponges, high resilience and slow resilience sponges.

Availability: Yes Type: Others

Use: High resilience, slow resilience sponge Model: Dabco RP208

Specification: 25kg / barrel Trademark: Airborne Chemicals

Packing: Barrel Supplier: XinDian Chemical

Capacity: 2000

Introduction:

Brand: Air Chemical

Model: RP205

Product Name: Amine Catalyst

Main Ingredients: Catalyst

Use: Low VOC soft sponge

Useful life: slow rebound sponge

Use temperature：/℃

Specific surface area: /m2/kg

Heap density: /kg/m3

Water absorption: /%

Overall size: barrel

Packing specification: 25kg/drum

Role:

Odorless and high efficient reactive balanced catalyst for the production of low odor and low VOC soft sponges, suitable for medium and high density ordinary sponges, high resilience and slow resilience sponges.

Shelf life.

Keep unopened, two years

Storage and transportation:

Should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

Dabco 33-S/Microporous catalyst

Dabco 33-S/Microporous catalyst

Overview:

Product Name: DABCO 33-S Microporous Catalysts

Alias: Dabco 33-S, Dabco 33S, 33% BDO solution of triethylenediamine, Addocat 106, TEDA-L33B, DABCO POLYCAT microporous catalyst, microporous catalyst, gel catalyst Dabco 33S

Product Description: DABCO® POLYCAT® Microporous CASE Catalyst User Guide

Airborne Chemical Products, a global leader in polyurethane additives, offers DABCO, POLYCAT thermally delayed catalysts for use in the microporous CASE sector. The DABCO, POLYCAT product range also includes applications for the polyurethane foam family.

Polyurethane is a versatile material that is well suited for a variety of CASE (coatings, adhesives, sealants and elastomers) applications.

Our solutions enable you to optimize the performance of your formulations by controlling reaction profiles and open times, improving surface appearance and adhesion, and helping to enhance the physical properties of the final product.

We work closely with our customers, so we are constantly aware of the latest trends and issues affecting the polyurethane market. This enables us to proactively develop innovative products that respond to changing market needs. Our production sites and laboratories are located around the world, so we are well positioned to meet your needs now and in the future.

Product Name Description Application Properties

DABCO 25S 25% Triethylene diamine solution Standard industrial gel catalyst for 1,4-butanediol systems.

DABCO 33S 33% Triethylene diamine solution Standard industrial gel catalyst for 1,4-butanediol systems.

DABCO EG 33% triethylenediamine solution Standard industrial gel catalyst for ethylene glycol systems.

DABCO Solid Amine Triethylene Diamine Standard industrial gel catalyst (Triethylene Diamine Solid)

DABCO DC1 Mixture of tertiary amines Delayed action tertiary amines to promote carbamate (polyol-isocyanate) reactions

DABCO DC2 mixture of tertiary amines Delayed acting tertiary amines, higher activity compared to DABCO DC1

POLYCAT DBU 1,8-diazabicyclo[5,4,0]undec-7 Strong gel tertiary amine, promotes carbamate (polyol-isocyanate) reactions

POLYCAT SA1/10 DBU Amine Salt Blend Acid-Free Thermally Activated Catalyst for Excellent Back-End Curing

POLYCAT SA102 DBU Amine Salt Blend Delayed-acting, heat-activated catalyst that provides excellent back-end curing

POLYCAT SA2LE DBU Amine Salt Blend Low emission thermally activated catalyst with delayed front end and accelerated back end cure

POLYCAT SA5 DBU Amine Salt Blend Delayed acting thermally activated catalyst that provides excellent back-end cure.

POLYCAT SA8 DBU amine salt blend Thermally activated co-catalyst with excellent front-end delay

POLYCAT SA20 DBU Amine Salt Blend DBT-free, low-emission catalyst with back-end cure similar to tin catalysts

DABCO 1027 Mixture of tertiary amines Non-acid delayed catalyst with excellent back-end cure for glycol systems

DABCO 1028 Mixture of tertiary amines Non-acid delayed catalyst for 1,4-butanediol systems.

DABCO T 12 Dibutyltin Dilaurate Standard industrial organotin catalyst, strong gel, medium hydrolytic stability.

DABCO T 120 Organotin Strong gel catalyst with good hydrolytic stability

DABCO T 125 Organotin More delayed action than DBTDL, good hydrolytic stability

DABCO T 131 Organotin More delayed action than DBTDL, good hydrolytic stability

DABCO MB20 Organic Bismuth Bismuth-based catalyst with high catalytic activity, the best choice to replace DBTDL.

Shelf life.

Keep unopened for two years

Storage:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

Addocat 106/TEDA-L33B/DABCO POLYCAT

Addocat 106/TEDA-L33B/DABCO POLYCAT

Overview:

Product Name: DABCO 33-S Microporous Catalysts

Alias: Dabco 33-S, Dabco 33S, 33% BDO solution of triethylenediamine, Addocat 106, TEDA-L33B, DABCO POLYCAT microporous catalyst, microporous catalyst, gel catalyst Dabco 33S

Product Description: DABCO® POLYCAT® Microporous CASE Catalyst User Guide

Airborne Chemical Products, a global leader in polyurethane additives, offers DABCO, POLYCAT thermally delayed catalysts for use in the microporous CASE sector. The DABCO, POLYCAT product range also includes applications for the polyurethane foam family.

Polyurethane is a versatile material that is well suited for a variety of CASE (coatings, adhesives, sealants and elastomers) applications.

Our solutions enable you to optimize the performance of your formulations by controlling reaction profiles and open times, improving surface appearance and adhesion, and helping to enhance the physical properties of the final product.

We work closely with our customers, so we are constantly aware of the latest trends and issues affecting the polyurethane market. This enables us to proactively develop innovative products that respond to changing market needs. Our production sites and laboratories are located around the world, so we are well positioned to meet your needs now and in the future.

Product Name Description Application Properties

DABCO 25S 25% Triethylene diamine solution Standard industrial gel catalyst for 1,4-butanediol systems.

DABCO 33S 33% Triethylene diamine solution Standard industrial gel catalyst for 1,4-butanediol systems.

DABCO EG 33% triethylenediamine solution Standard industrial gel catalyst for ethylene glycol systems.

DABCO Solid Amine Triethylene Diamine Standard industrial gel catalyst (Triethylene Diamine Solid)

DABCO DC1 Mixture of tertiary amines Delayed action tertiary amines to promote carbamate (polyol-isocyanate) reactions

DABCO DC2 mixture of tertiary amines Delayed acting tertiary amines, higher activity compared to DABCO DC1

POLYCAT DBU 1,8-diazabicyclo[5,4,0]undec-7 Strong gel tertiary amine, promotes carbamate (polyol-isocyanate) reactions

POLYCAT SA1/10 DBU Amine Salt Blend Acid-Free Thermally Activated Catalyst for Excellent Back-End Curing

POLYCAT SA102 DBU Amine Salt Blend Delayed-acting, heat-activated catalyst that provides excellent back-end curing

POLYCAT SA2LE DBU Amine Salt Blend Low emission thermally activated catalyst with delayed front end and accelerated back end cure

POLYCAT SA5 DBU Amine Salt Blend Delayed acting thermally activated catalyst that provides excellent back-end cure.

POLYCAT SA8 DBU amine salt blend Thermally activated co-catalyst with excellent front-end delay

POLYCAT SA20 DBU Amine Salt Blend DBT-free, low-emission catalyst with back-end cure similar to tin catalysts

DABCO 1027 Mixture of tertiary amines Non-acid delayed catalyst with excellent back-end cure for glycol systems

DABCO 1028 Mixture of tertiary amines Non-acid delayed catalyst for 1,4-butanediol systems.

DABCO T 12 Dibutyltin Dilaurate Standard industrial organotin catalyst, strong gel, medium hydrolytic stability.

DABCO T 120 Organotin Strong gel catalyst with good hydrolytic stability

DABCO T 125 Organotin More delayed action than DBTDL, good hydrolytic stability

DABCO T 131 Organotin More delayed action than DBTDL, good hydrolytic stability

DABCO MB20 Organic Bismuth Bismuth-based catalyst with high catalytic activity, the best choice to replace DBTDL.

Shelf life.

Keep unopened for two years

Storage:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

TEDA-L33B/DABCO POLYCAT/Gel catalyst

TEDA-L33B/DABCO POLYCAT/Gel catalyst

Overview:

Product Name: DABCO 33-S Microporous Catalysts

Alias: Dabco 33-S, Dabco 33S, 33% BDO solution of triethylenediamine, Addocat 106, TEDA-L33B, DABCO POLYCAT microporous catalyst, microporous catalyst, gel catalyst Dabco 33S

Product Description: DABCO® POLYCAT® Microporous CASE Catalyst User Guide

Airborne Chemical Products, a global leader in polyurethane additives, offers DABCO, POLYCAT thermally delayed catalysts for use in the microporous CASE sector. The DABCO, POLYCAT product range also includes applications for the polyurethane foam family.

Polyurethane is a versatile material that is well suited for a variety of CASE (coatings, adhesives, sealants and elastomers) applications.

Our solutions enable you to optimize the performance of your formulations by controlling reaction profiles and open times, improving surface appearance and adhesion, and helping to enhance the physical properties of the final product.

We work closely with our customers, so we are constantly aware of the latest trends and issues affecting the polyurethane market. This enables us to proactively develop innovative products that respond to changing market needs. Our production sites and laboratories are located around the world, so we are well positioned to meet your needs now and in the future.

Product Name Description Application Properties

DABCO 25S 25% Triethylene diamine solution Standard industrial gel catalyst for 1,4-butanediol systems.

DABCO 33S 33% Triethylene diamine solution Standard industrial gel catalyst for 1,4-butanediol systems.

DABCO EG 33% triethylenediamine solution Standard industrial gel catalyst for ethylene glycol systems.

DABCO Solid Amine Triethylene Diamine Standard industrial gel catalyst (Triethylene Diamine Solid)

DABCO DC1 Mixture of tertiary amines Delayed action tertiary amines to promote carbamate (polyol-isocyanate) reactions

DABCO DC2 mixture of tertiary amines Delayed acting tertiary amines, higher activity compared to DABCO DC1

POLYCAT DBU 1,8-diazabicyclo[5,4,0]undec-7 Strong gel tertiary amine, promotes carbamate (polyol-isocyanate) reactions

POLYCAT SA1/10 DBU Amine Salt Blend Acid-Free Thermally Activated Catalyst for Excellent Back-End Curing

POLYCAT SA102 DBU Amine Salt Blend Delayed-acting, heat-activated catalyst that provides excellent back-end curing

POLYCAT SA2LE DBU Amine Salt Blend Low emission thermally activated catalyst with delayed front end and accelerated back end cure

POLYCAT SA5 DBU Amine Salt Blend Delayed acting thermally activated catalyst that provides excellent back-end cure.

POLYCAT SA8 DBU amine salt blend Thermally activated co-catalyst with excellent front-end delay

POLYCAT SA20 DBU Amine Salt Blend DBT-free, low-emission catalyst with back-end cure similar to tin catalysts

DABCO 1027 Mixture of tertiary amines Non-acid delayed catalyst with excellent back-end cure for glycol systems

DABCO 1028 Mixture of tertiary amines Non-acid delayed catalyst for 1,4-butanediol systems.

DABCO T 12 Dibutyltin Dilaurate Standard industrial organotin catalyst, strong gel, medium hydrolytic stability.

DABCO T 120 Organotin Strong gel catalyst with good hydrolytic stability

DABCO T 125 Organotin More delayed action than DBTDL, good hydrolytic stability

DABCO T 131 Organotin More delayed action than DBTDL, good hydrolytic stability

DABCO MB20 Organic Bismuth Bismuth-based catalyst with high catalytic activity, the best choice to replace DBTDL.

Shelf life.

Keep unopened for two years

Storage:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

DABCO MP608/Delayed equilibrium catalyst

DABCO MP608/Delayed equilibrium catalyst

Overview:

Product Name: DABCO MP608 Delayed Equilibrium Catalyst

Alias: DABCO MP608, DABCO MP608 Catalyst, Delayed Equilibrium Catalyst

Product Description: DABCO MP608 delayed equilibrium catalyst shorten the molding time catalyst

Dabco Catalyst Characteristics and Uses Meto, Yingchuang Catalyst Grade

Dabco 328 Low odor delayed foaming catalyst for polyurethane molded products, such as car seats, carpets, etc. JEFFCAT LED-103

Dabco 410 low VOC, low odor delayed gel catalyst for all polyurethane high resilience molded products

Dabco 7311 Low Odor Delayed Balanced Polyurethane Catalyst (Special Order)

Dabco 7331 Low Odor Delay Balanced Polyurethane Catalyst (Special Order)

Dabco 7341 Low Odor Delayed Balanced Polyurethane Catalyst (Special Order)

Dabco A-300 Polyurethane Delay Catalyst, excellent open cell and low corrosivity NIAX* A-300

Dabco A-400 Open cell foaming catalyst, delayed foaming reaction, improved flow, low corrosion NIAX＊ A-400

Dabco A-107 Delayed polyurethane foam catalyst NIAX＊ A-107

Dabco 8154 Polyurethane delayed gel catalyst, improves flow, shortens demolding time DABCO 8154

Dabco BL-17 Polyurethane delayed foaming catalyst, improves flow, shortens demolding time, good open cell properties DABCO BL-17

Dabco 1027 Polyurethane delayed foaming catalyst for shoe soles, improves flow and reduces demolding time, non acid closed DABCO 1027

Dabco 1028 Polyurethane sole delay catalyst to improve flow and shorten demolding time, 1,4-butanediol system DABCO 1028

Dabco MP-601 Balanced catalyst with delay to improve flow or shorten demolding time DABCO MP-601

Dabco MP-608 Polyurethane delayed equilibrium catalyst to give excellent flow, especially in high MDI systems DABCO MP-608

Dabco SA-1 Delayed polyurethane strong gel catalyst for CASE systems POLYCAT SA1

Dabco SA102 Delayed Polyurethane Strong Gel Catalyst for CASE Systems POLYCAT SA102

Dabco UL-32 Delayed tin catalyst with good hydrolytic stability NIAX* UL-32

Dabco UL-54 Delayed organotin catalyst for polyurethane shoe soles, free of tributyltin and trioctyltin NIAX* UL-54

Dabco UL-6 Delayed organotin catalyst for polyurethane molding and microcellular foam NIAX＊ UL-6

Dabco UL-29 Enhanced delayed organotin catalyst with high hydrolytic stability NIAX* UL-29

Dabco 8211 Thermal Polyurethane Catalyst for CASE Systems

Dabco 8221 Thermosensitive Polyurethane Catalyst for CASE Systems

Dabco 8223 Thermosensitive Polyurethane Catalyst for CASE Systems

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool, ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com

Delayed equilibrium catalyst/DABCO catalyst

Delayed equilibrium catalyst/DABCO catalyst

Overview:

Product Name: DABCO MP608 Delayed Equilibrium Catalyst

Alias: DABCO MP608, DABCO MP608 Catalyst, Delayed Equilibrium Catalyst

Product Description: DABCO MP608 delayed equilibrium catalyst shorten the molding time catalyst

Dabco Catalyst Characteristics and Uses Meto, Yingchuang Catalyst Grade

Dabco 328 Low odor delayed foaming catalyst for polyurethane molded products, such as car seats, carpets, etc. JEFFCAT LED-103

Dabco 410 low VOC, low odor delayed gel catalyst for all polyurethane high resilience molded products

Dabco 7311 Low Odor Delayed Balanced Polyurethane Catalyst (Special Order)

Dabco 7331 Low Odor Delay Balanced Polyurethane Catalyst (Special Order)

Dabco 7341 Low Odor Delayed Balanced Polyurethane Catalyst (Special Order)

Dabco A-300 Polyurethane Delay Catalyst, excellent open cell and low corrosivity NIAX* A-300

Dabco A-400 Open cell foaming catalyst, delayed foaming reaction, improved flow, low corrosion NIAX＊ A-400

Dabco A-107 Delayed polyurethane foam catalyst NIAX＊ A-107

Dabco 8154 Polyurethane delayed gel catalyst, improves flow, shortens demolding time DABCO 8154

Dabco BL-17 Polyurethane delayed foaming catalyst, improves flow, shortens demolding time, good open cell properties DABCO BL-17

Dabco 1027 Polyurethane delayed foaming catalyst for shoe soles, improves flow and reduces demolding time, non acid closed DABCO 1027

Dabco 1028 Polyurethane sole delay catalyst to improve flow and shorten demolding time, 1,4-butanediol system DABCO 1028

Dabco MP-601 Balanced catalyst with delay to improve flow or shorten demolding time DABCO MP-601

Dabco MP-608 Polyurethane delayed equilibrium catalyst to give excellent flow, especially in high MDI systems DABCO MP-608

Dabco SA-1 Delayed polyurethane strong gel catalyst for CASE systems POLYCAT SA1

Dabco SA102 Delayed Polyurethane Strong Gel Catalyst for CASE Systems POLYCAT SA102

Dabco UL-32 Delayed tin catalyst with good hydrolytic stability NIAX* UL-32

Dabco UL-54 Delayed organotin catalyst for polyurethane shoe soles, free of tributyltin and trioctyltin NIAX* UL-54

Dabco UL-6 Delayed organotin catalyst for polyurethane molding and microcellular foam NIAX＊ UL-6

Dabco UL-29 Enhanced delayed organotin catalyst with high hydrolytic stability NIAX* UL-29

Dabco 8211 Thermal Polyurethane Catalyst for CASE Systems

Dabco 8221 Thermosensitive Polyurethane Catalyst for CASE Systems

Dabco 8223 Thermosensitive Polyurethane Catalyst for CASE Systems

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool, ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:	Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager:	Hunter
E_Mail:	[email protected]
Telephone:	86-021-5657 7831
Fax:	86-021-5657 7830
Address:	Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland)
Website:	www.newtopchem.com